Advanced Weapons And Equipment India Limited Tenders

Custom Bid for Services - HIRING OF VEHICLE SUV TYPE (AC TYPE) FOR ONE YEAR DISTANCE TRAVELLED BY THE VEHICLE NOT EXCEED 100000 KM Similar Category Monthly Basis Cab & Taxi Hiring Services

RECEIVER WITHOUT HEAT TREATMENT CONDITION AS PER DRG. NO. 2301 01 01 01 01 000 00DB FOR MAG (MMG) WI

TRICHLOROETHYLENE OR ALTERNATIVE CHEMICAL TO TEC- TECH TYPE 1 SPECN. NO. IS-245 OF 1988 (3RD REVISION)

DESIGN AND DEVELOPMENT OF CBT FOR 7.62X51MM MMG UPGRADE AS SCOPE OF WORK ATTACHED IN ANNEXURE-1

Steel Trunkconfirmingto IS7257 (V3) (Q2)

CTG. SA12 bore pressure proof paper

Custom Bid for Services - SUPPLY and INSTALLATION OF CCTV SURVELLANCE SYSTEM AT PERIMETE PERIMETER BOUNDRY WALL AS PER SCOPE OF WORK NO 01 SAF SO 2025 Similar Category INTEGRATED SECURITY SURVEILLANCE SYSTEM SERVICE

TELESCOPIC COVER, SUR ARMOUR PART NO. S-101166- 4H146801110 MAKE: SUR ARMOUR PVT. LTD.

CTG. SA12 BORE-PAPER (65MM) FLG.

HYDROCHLORIC ACID TECHNICAL GRADE CONC: IS: 265/1993 CONTAINER: HDPE, CAPACITY: 10-20KGS, PHOSDINE- 41(62-41) AS PER SPECIFICATION: A) SPECIFIC GRAVITY: 1.48+/- 0.2 (B) WITH 4% CONCENTRATION

Custom Bid for Services - SUPPLY AND INSTALLATION OF FUME EXHAUST SYSTEM FOR PIT TYPE FURNACE AS PER SCOPE OF WORK Similar Category Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2)

MS ELECTRODE ARMS FOR SALT BATH FURNACE DRAWING NO. SAF-6/190 IS-2879-1975. (ONE SET CONSISTING OF 3 N

SHAFT ACTUATING LEVER TO DRAWING NO. 5047139

IFG MK-I Barrel Forging Drg. No. IFGK/Forge/4-1 2)

HSS T/S TWIST DRILL 26.0MM DIA, (M-42) IS: 5103. MAKE-ADDISION, ZENITH, BIRLA, MIRANDA, TOTEM, ITM(BIRLA) , G, HSS TAPER SHANK TWIST DRILL AS PER IS; 5103 -1969 SIZE-12.00 MM MAKE- ADDISION, ZENITH, BIRLA, MIRANDA,

ANGULAR POSITION ENCODER PART NO. BRGE1-WBA24-EP- P-R-K-02.5 (OR) EQUIVALENT 1: 1 REPLACEMENT TYPE ENCO

HAMMER FORGINGS TO DRG. M6-0001 F FOR RIFLE 7.62MM 1A1

PIN ASSEMBLY, BREECH LOCK, OOW50BMG AS PER DRG NO. 6008784 OF M2HB GUN

Body (Receiver) as per drg. no. PAG-0059/A

VERTICAL BROACHING MACHINE

PULSE CODER TYPE A860-0315-T102 2500P (PAT. PEND) FANUC LTD MADE IN JAPAN.

MANUFACTURING AND SUPPLY OF EJECTOR(C3006) TO DRG. PART. NO. 2A 42.03. 006 WITH FIRMS MATERIAL THROUGH F

PROTECTIVE GEAR AS PER THE DESCRIPTION AND BILL OF MATERIAL (ENCLOSED) PART NO. 1156272D

BORE CLEANING STAFF ASSY. TO DRG. NO. 2A42/INA/0555 (C9056) DC. NO. 18845-W DT. 13.01. 2004 FOR DC. No, LAT

Torsion Spring Drg. No. 8603 02 01 11 00 010 00PA

SEALED COLLET SET ETM STD. PRECISION ER-32 (RUN OUT WITHIN 0.01MM) SIZE-19MM TO 20 MM BORE. MAKE-ETM/E

COMPRESSION SPRING DRG. NO. 8603 02 01 11 00 004 00 PA

SOLENOID VALVE½ INCH (VALVE & COIL), MODEL NO. III- 24V-DC-16-H-LD-S. S (IP-67), MAKE: ROTEX OR SUBST

MACHINING OF T-90 CRADLE TO DRG. NO. GCF-20A-SK-885, SHT 1 TO 6 AS PER QAP & SCOPE OF WORK.

PVD TIALN COATED 18 MM DIA SOLID CARBIDE DRILL WITH INTERNAL COOLANT, DRILL DEPTH EXACT 3XD, FOR LOW, 12.5MM DIA SOLID CARBIDE DRILL WITH INTERNAL COOLANT, FOR LOW ALLOY STEEL IS, PVD TIALN COATED 6.8 MM DIA SOLID CARBIDE DRILL WITH INTERNAL COOLANT, DRILL DEPTH EXACT 8XD, FOR LO

HYDRAULIC CYL RAMMER UNIT (EU) TO PART NO. 1149421, LOCKING VALVE ELEVATION (EU) TO DRG. NO. 1149441, PISTON GLUING & MACHINING TO SCHEDULE NO. 1131532 & DRAWING NO. 6332001, SOLENOID VALVE PART NO. 5175572

SPL. HIGH PERFORMANCE SOLID CARBIDE RT100 T INTERNAL COOLANT LONG DRILL DIA 10 (+ 0.021/+ 0.006) MM F, SK40 HYDRAULIC ADAPTER DIA 10 MM, RUN OUT ACCURACY 0.003 MM BALANCING G2.5/25000 REV/MIN. CODE-4213-, SPL. HIGH PERFORMANCE SOLID CARBIDE RT 100 INTERNAL COOLANT PILOT DRILL DIA 13.65 (+ 0.025/+ 0.007) MM, SK40 HYDRAULIC ADAPTER DIA 14 MM, RUN OUT ACCURACY 0.003 MM, BALANCING G2.5/25000 REV/MIN. CODE-4213

SPL. HIGH PERFORMANCE SOLID CARBIDE 3 FLUTED RT 100T, INTERNAL COOLANT LONG FINAL SIZE DRILL DIA 10 (, SPL. HIGH PERFORMANCE SOLID CARBIDE RT100T, INTERNAL COOLANT, DOUBLE MARGIN 7906+ POLISHING LONG DRILL

sonicator System (Q3)

COLLET CHUCK HOLDER BT40 AT3 TAPER ER16X135 FOR BREACHBLOCK LMG/RIFLE 5.56MM/BARREL REV. PH-3/1 MAKE

PARALLEL POLE MAGNETIC CHUCK WITH MANUAL ACTUATION, CLAMPING FORCE 80 N/CM2 FOR GRINDING OPERATIONS

CC22 STRAIGHT CUTTING OIL

FOLDING BUTT ASSEMBLY FOR GPMG 7.62X51MM DRG. NO. SK-GPMG-6321* (REF DRG NO 1804 10 00 00 00 001 00DA)

Custom Bid for Services - AMC OF CANTEEN LPG PLANT TERMS AND CONDITION ATTACHED AS PER ANNEXURE NO MCO 06519 Similar Category Support Services

INDUCTION HEATER TO SHRINK/DESHRINK DIE HOLDER AND DIE AS PER ANNEXURE-I NO. 4209/PROV/SF/IH/2026

Kerosene as per IS-1459/1974

ST. RD. 125MM DIA IN STD LENGTH TO SPECN. BS: 970 PT-3 1991, Gd. 826 M31` V'CONDN. OR IS: 5517-93, Gd. 31Ni10 C

safety cord net, mesh size: 2 inch, Roll size: 3 mtr x 10 mtr

Deep Freezer Markedto IS7872 (Under BISScheme1) (V2) (Q2)

CATCH SAFETY for 0.315 SPORTING RIFLE DRG NO. (SP-46)

BUSHING, FRONT CENTRIFUGAL CASTING TO DRG NO. GCF TM 10(I) (REF DRG NO. 2A26-09-22, D. S. CAT NO. 1015-002

PRIMER MAGAZINE GENERAL DRAWING ASSEMBLY NO. 4091303D

Repair and Overhauling Service - CNC BORING MACHINE FGK-1022; HEC; No; Buyer Premises

MODULAR WORK STATION AND REVOLVING CHAIR AS PER ANNEXURE NO. MCO 0772

AMMONIA GAS IN STANDARD CYLINDER., 80% ARGON+ 20% CO2 GAS FOR 155MM PROJECT, COMPRESSED AIR WITH CYLINDER, GAS ACETYLENE DISSOLVED, NITROGEN GAS HAVING PURITY OF 99.5%, GAS OXYGEN