Andrew Yule Company Limited Tender Results

Test leads for Megger make Insulation tester (Model no MIT 525, 15 meters length)

Insulation Press paper IEC 60641/8570 type D (undyed) in rolls Thickness: 20 mill (0.50 mm) Width, Insulation Kraft paper IEC 60554-3-5 IS 9335 Part- 3/Sec- 1 in roll Thickness: 2 mill (0.05 mm) Wid

Annealed copper foils 50 mm width & 0.2 mm thickness, Annealed copper foils 75 mm width & 0.2 mm thickness

C. T ratio: 1653/1 Amps, Accuracy class: class 0.2, Burden: 10 VA, cotton tape wound current tfr, C. T ratio: 276/1 Amps, Accuracy class: class 3, Burden: 10 VA cotton tape wound current transformer

Filament reinforce paper tape as per our specification, Aluminium Crepe Paper Cindus Corporation Make Grade: 55 Foil/Weidmann’ S Make Cat. No. K-71-1 135 G

EARTHING LINK 40 X 1.5 X 200 LONG AS PER DRAWING NO - TG-A4-4144 R3 PART NO 1 Finishing: Tinned

M. S. YOKE WASHER - ID: 21 MM OD: 52 MM THIK: 6 MM, M. S. YOKE WASHER - ID: 26 MM OD: 62 MM THIK: 6 MM

Conservator Protection Relay/Aircell Rupture relay with 1 NO (Normally Open)

Aircell/Atmoseal type Magnetic Oil level gauge SO10 (250 mm dia) no of contacts: 1 with 15Degree inc, Conventional type Magnetic Oil level gauge SO4 (100 mm dia) no of contacts: 1 with 15Degree incl

Capacitor single phase, 150 KVAR, 3.3 kV BIL 28/75 kV as per our drawing

CRIMPING LUG (STRT) FOR 6.72/8.72, 9/11 19/0.044, 0.048, 0.072 AS PER DRG NO: T- A3-8864 R1 LUG 1 FIG 2, CRIMPING LUG FOR 500/0.05 & 14.4/18.4 BEND LUG 3 FIG 1 AS PER DRG NO: T-A3- 8864 R1, CRIMPING LUG FOR 500/0.05 & 14.4/18.4 STRAIGHT LUG 3 FIG 2 AS PER DRG NO: T-A3- 8864 R1

31.5 MVA RTCC Panel as per our drawing no. TG-A3-13764 Rev. 0, 31.5 MVA M. Box as per our drawing no. TG-A3- 13766 Rev. 0, 31.5 MVA M. Box for Fibre optic temperature sensor as per our drawing no. TG-A3-13765 Rev. 1

TAP POSITION INDICATOR (TPI) WITH DUAL 4-20 MA OUTPUT, SUITABLE TO SCADA 110/230 V AC 50 HZ, 21 TAPS

Cast Steel Roller, 250 MM Dia, flanged (Part no. 1 to 3 included) as per dwg. no. ITD-719 Rev. 2

LEAD SOLDERING STICK 60/40, ROSIN CORED SOLDERING WIRE 60/40 16 SWG, FRYSOL PASTE, FRYOLUX SOLDER PAINT GRADE D

Service provider for assembling of CRGO lamination core above 8 MVA transformer

Price Variation Clause 6689e0ae7473a385322143a1a3c0e7 19.pdf, Price Variation Clause 0e52aeff12f26865d599cc72f3500962 .pdf

Cast Steel Roller, 250 MM Dia, flanged (Part no. 1 to 6 included) as per dwg. no. TG-A4- 4318 R3

33 KV EPOXY INSULATOR AS PER THE DRAWING TG-3156 Rev. no 2 (Part -3, 33 KV)

Pest and Animal Control Service - Maintenance Contract; 12 months; Fumigation, Pest and Animal Control Service - Maintenance Contract; 12 months; Vector Control (Mosquitoes/insects)

36 KV/2000 Amps Porcelain Bushings with creepage distance 31 mm per KV, 12 KV/2000 Amps Porcelain Bushings with creepage distance 31 mm per KV

Supply of Power Transformer Tank as per our drawings

M. S Air vent screw as per drawing no. TG-A4-4062 Rev. 2

Dr. Beck/Elantas Beck make P80 paste

80 mm gas oil relay reed type with flange distance 215 mm no of contacts: 2 (alarm & trip)

GEAR OIL, HYDRAULIC, LED TUBE LIGHT, OIL SEAL, BEARING, CAPACITOR 4 MFD, CAPACITOR 6 MFD, 3 PIN PLUG TOP 6 AMPS, 3PIN SOCKET 6AMPS, 6 AMPS SINGLE WAY SWITCH, PVC INSULATION TAPE, AIR BREAK CONTACTOR SIEMENS, UNARMOURED MULTISTRAND COPPER CABLE 1000V, DIGITAL TEMPERATURE INDICATOR, PT100 SENSOR METALLIC CABLE LENGTH 5 METER

M. S. Pressure Screws M36 x 4, 220 mm long with Threaded Bush and Check Nut Dwg. No. TG-A4-3280 R4

TAP POSITION INDICATOR (TPI) WITH DUAL 4-20 MA OUTPUT, SUITABLE TO SCADA 110/230 V AC, 50 HZ

Unloading of Transformer and its accessories, supervision of Erection, Oil filling, Testing etc

Temperature Remote Indicator with dual 4-20 mA output Temperature range -40 deg C to+ 80 deg C, Humidity Remote Indicator with dual 4-20 mA output Humidity range: 0% to+ 100%

Condition Controlled Maintenance free breather (Smart breather) as per the KPTCL specifications

Supply of Press Construction as per the drawings

SILVER BRAZING ROD FOR COPPER TO COPPER BRAZING

Customized AMC/CMC for Pre-owned Products - ANNUAL MAINTENANCE CONTRACT; 250 KVA DIESEL GENERATOR; Annual Maintenance Contract (AMC); Monthly; Yes

Electrolytic grade Copper flat (Size: 50 mm x 10 mm)

Bi-metallic terminal connector for (H. T) as per our drawings no. TG-A3-13330 Rev. 0, Bi-metallic terminal connector for (L. T) as per our drawings no. TG-A3- 13363 Rev. 0

Marathon Make” Propeller Fan 24”, 3 Phase, 700 RPM Model No. BVN61083 with Rear &Front side Fan Guard, 900 RPM Model No. BVN61063 With Fan Guard

Service provider for assembling of 31.5 MVA 66/11 KV Power Transformers as per the scope of work, Service provider for assembling of 20 MVA 110/11 KV Power Transformers as per enclosed scope of work, Service provider for assembling of 20 MVA 66/11 KV Power Transformers as per enclosed scope of work, Service provider for assembling of 10 MVA 110/11KV or 12.5 MVA 66/11 KV Power Transformers

Customized AMC/CMC for Pre-owned Products - AMC; Hydraulic Mobile Crane; Annual Maintenance Contract (AMC); Monthly; Yes

FRP NUT M16 MM, GRADE: EP2/EP3 Part no. 2 as per drawing No. TG-A4-7789 REV. 0, FRP Full Threaded Rod M16 X 1000 MM long, GRADE: EP2/EP3 Part no. 4 as per drawing No. TG-A4-7789 R0

AYCL AR 2025

Gun metal Gate Valves with locking rod and position indicator flanged end 20 mm, Gun metal Gate Valves with locking rod and position indicator flanged end 25 mm, Gun metal Gate Valves with locking rod and position indicator flanged end 50 mm, Gun metal Gate Valves with locking rod and position indicator flanged end 80 mm, Gun metal Gate Valves with locking rod and position indicator flanged end 100 mm

Supply of Hand Held Battery Operated Green Tea Harvester