Armoured Vehicles Nigam Limited Tenders

FLANGE TO DRG NO. 232-220H(AS PER DRAWINGS AND SPECIFICATIONS)

LED Luminaire For Floodlight Conforming To IS10322 (Part5/Section5) (V3) (Q2)

EXTERNAL OD GROOVING LEFT HAND TOOL HOLDER WITH SUITABLE 4MM INSERT AND SPARES, EXTERNAL OD GROOVING LEFT HAND TOOL HOLDER WITH SUITABLE 6MM INSERT AND SPARES, EXTERNAL OD GROOVING LEFT HAND TOOL HOLDER WITH SUITABLE 3MM INSERT AND SPARES, ID GROOVING LEFT HAND TOOL HOLDER WITH SUITABLE 2MM INSERT AND SPARES

PERPEX SHEET TRANSPARENT DARK BLUE COLOR SIZE: 3'X4'X 5MM THICK.

SCREW AIR COMPRESSOR ALONG WITH AIR DISTRIBUTION

END MILL DIA 20, APPROACH LENGTH 150, OAL 200 WITH SUITABLE INSERTS ISO P40., INSERT TYPE END MILL DIA 16 X SHANK DIA 14 X OAL 160MM, FACE MILL CUTTER DIA 40MM THROUGH COOLANT WITH INSERTS AND SPARES, FACE MILLING CUTTER DIA 50MM FOR RAMPING & HELICAL MILLING WITH SUIT. INSERTS(MIN. LGT 14MM) P40

AIR INTAKE HEATING UNIT ASSY TO DRG NO. SB 345-00-4

COSINE POTENTIOMETER (Z7/RUS-BL 4.685. 014) TO DRG. NO. BL4.685. 014 SPECIFICATION BLO. 468-007 TY

BEARING BALL THRUST TO DESIGNATION 51100. MAKE: SKF

RH BRANCH PIPE TO DRG NO. SB 3321-14-1

SPECIAL REPAIRS TO WALLS, FLOOR AND ROOF IN HVFTS AT HVF, AVADI.

RUBBER CAP FOR TOGGLE ON OFF SWITCH/BL8.634. 273, COVER/BL8-056-174, ILLUMINATION HOLDER/ADSH6-615- 003

WASHER/60.07. 021, WASHER/602.63. 049, WASHER 172.56. 014

TELESIS SPARE PIN, IMPACT, 150A TOOL STEEL CARBIDE TIPPED 45 DEGREES. PRODUCT CODE: 48661, HSN CODE: 9

ALUMINIUM SHEET 6061-T651 PERASTM B 209, 25 MM THICK PLATESIZE: 25X145X1300 MM. PGG SHALL BE LIMITED

PIN SHOULDERED HEADLESS TO DRG. NO. 675-54-203

STRAP TO DRG. NO. 432.43. 014-1

Custom Bid for Services - ANNUAL SERVICE MAINTENANCE CONTRACT FOR PLOTTER CUM SCANNER OCE 345, Custom Bid for Services - ANNUAL SERVICE MAINTENANCE CONTRACT FOR PLOTTER CUM SCANNER OCE PLOT WAVE 345 MFP Similar Category Facility Management Services - LumpSum Based Facility Management Services - LumpSum Based

Goods Transport Service – Per Trip based Service - DEFENCE ITEMS; Open Body LCV Truck; 22 FEET LONG X 7 FEET WIDTH

INSERT CARBIDE DCMT 11T304 UR P30 COATED, INSERT CARBIDE KNUX 160405 R11 P40, INSERT CARBIDE RCMX 100300 P40 COATED, INSERT CARBIDE VBMT 160404 GRADE P40 COATED

SUPPLY OF 5 KVA INVERTER, BATTERY CHARGING VOLTAGE ( 12 VOLT* 9 BATTERIES) 108 VOLT DC, INPUT VOLTAGE

O RING( SKF)/V548.0122. 9018, O RING( ROTHE ERDE) V548.0122. 9017

WASHER 712-02-185, GASKET 765-06-828, GASKET 765- 06-261, SCREW 765-06-534, PIN 672-32-12, GASKET DRG. NO. 700-40-186, AXLE 672-47-5, BOSS 765-50-2993, AXLE 765-50-1473, GASKET 675-64-653, AXLE 700-47- 358-04, BRACKET 675-84-CD112

ARMOUR MATERIALS FOR APC AS PER SPECIFICATION No. 98200/D2C-OFMK/AM/APC/2026-27 DT. 27/07/2026

DUPLEX THERMOCOUPLE, TYPE K(CR/AL), WIRE DIA 2MM, LENGTH_ 600MMWITH SS310 SHEATH OF SEAMLESS TUBE OF OD_, TYPE_ K (CR/AL) LENGTH 550 MM, 200 MM LENGTH SS 310 SHEATH OF DIA_ 18MM SEAMLESS T

HRC FUSE LINK, MODEL: CTTM 630/690, CURRENT RATING: 630A, VOLTAGE RATING: 690V AC, MAKE: EATON BUSSMANN/C&S

PROCUREMENT OF 8 TYPES OF SPARES

OUTSOURCING OF BILLING PROCESS IN MATERIAL MANAGEMENT DIVISION AS PER SCOPE OF WORK

SERVICE OF TECHNICAL TRIAL (HAA/DESERT/DGQA) OF STALLION PROTOTYPE VEHICLE AS PER GSQR 2019 PURCHAS

HORIZONTAL MOUNTABLE 48KW ELECTRICAL TUBULAR IMMERSION HEATER WITH CONTINIOUS RATING, CONNECTED IN 4

ELGI XD AIRLUBE 20LTRS PART NO. 000998119. (OLD P. NO. 000998053)

MILD STEEL PIPE IS: 1239 OD115MM WALLTHICKNESS 5.4MMXSTD LENGTH

OIL ELGI AIRLUBE PLUS, 210 LITERS P. NO. 000998116(OLD P. NO. 000 99805 C. )

Expression of Interest(EOI)/Technical Requirement Specification(TRS) for Design/Configuration, Supply, Installation and commissioning of a reusable instrumentation, Data Acquisition system, and execution of one instrumented trial of one T-90 Tank.

BOLT M6X16.46. 019, GOST 7798-70, BOSS M8X16X16 OST 3-1496-72, 4368-0816, NUT M12 X 1.25. 6.019 TO GOST 5929-70., NUT M8 X 6.019 AS PER GOST 5933-73, WASHER 2T 65G 05 GOST 6402-70

MANUFACTURING AND SUPPLY OF AMMUNITION RACK - SR AS PER DRG. NO. DW1220-0007-1 AND SCOPE OF WORK

MANUFACTURING AND SUPPLY OF AMMUNITION RACK - LRMR AS PER DRG. NO. DW-1220-0007-2 AND SCOPE OF WORK

PUSH ROD ASSY TO DRG NO. SB 3334-02-10

BOLT M6.6g X 40.46. 019, GOST 7795-70, BOLT 3M8-8g X 35.46. 019 TO GOST 7795-70, HEX BOLT 3M8 X 30.46. 019 GOST 7796-70, BOLT M10 X 16.46. 019 GOST 7796-70, BOLT M6X25.46. 019 GOST: 7798-70

6206410035 NUT/175.50. 011

6206111031 LOCK SCREW/434.12. 024 STEEL 38XC GOST: 4543-71, 6206509053 SCREW/155.36. 056 GOST: 7417- 75 15 5-B GOST: 1051-73, 7013805050 SCREW/GOST: 17473-80(BM5X50) BM5-6GX50.46. 016, 7103003000 SCREW/520.03. 003 STEEL 38XC GOST: 4543-71

MOUNTING THE FUEL FILTER ON ENGINE TO DRG NO. SB 20-35-00-5

TRACK PADS FOR FICV(TR) TO SPECIFICATION NO. 98200/D2C-OFMK/FICV/TP/2026-27

SOLID CARBIDE PARALLEL SHANK DRILL DIA: 7 MM, SHANK DIA: 7 MM, FLUTE LENGTH: 35 MM, OVER ALL LENGTH: 75

SUPPORT ASSY/188.93. 078CBCB, SUPPORT/175.93. 002CB-1

PURCHASE OF 6-SEATER EXECUTIVE CONFERENCE/MEETING TABLE AS PER ENCLOSED SPECIFICATION., PURCHASE OF EXECUTIVE BACK UNIT AS PER ENCLOSED SPECIFICATION., PURCHASE OF EXECUTIVE LEATHERETTE/LEATHER SOFA SET(3+ 1+ 1) AS PER ENCLOSED SPECIFICATION., PURCHASE OF MODULAR EXECUTIVE LOUNGE 3-SEATER SOFA AS PER ENCLOSED SPECIFICATION., PURCHASE OF PRIMARY EXECUTIVE GLASS-TOP COFFEE/CENTRE TABLE AS PER ENCLOSED SPECIFICATION., PURCHASE OF SECONDARY SOLID WOOD/VENEER CENTRE TABLE AS PER ENCLOSED SPECIFICATION.

TOOL ASSEMBLY FIXTURE BODY & SPARES FOR CLAMPING THE CAPTO EXTENTION ADAPTORS & TOOL HOLDERS ON HMT

SET OF ROUGH BORING BAR (3 EDGE) DIA. 70MM (THROUGH COOLANT) - 1NO ALONG WITH INSERT CCMT120408-PM442

LEVER TO DRG NO. SB 3334-01-10

SET OF ROUGH BORING BAR (3EDGE) DIA. 43MM (THROUGH COOLANT) - 1NO ALONG WITH INSERT CCMT 060208-PM 442