Armoured Vehicles Nigam Limited Tender Results

GASKET/520.10. 007-20, GASKET/520.10. 007-23, GASKET/520.10. 007-04, GASKET/520.10. 008-20

MANUFACTURING&SUPPLY OF SET OF FABRICATION & SHEET METAL WORK AS PER ANNEXURE FSMW1 FOR KAVACH MOD I

BACK COVER AS PER DRG. NO. DW-1109-0017-12.

TUBE UPPER ASSY/PV572.0756. 0018

SPACER/175.88. 003CB

XLPE Cablefor Working Voltageuptoand Including1.1 KV Marked To IS7098 (Part1) (Q2)

BUSH FOR CO. ROD SMALL END GOST 613-79 TO DRG NO. 304-13-3(AS PER DRAWINGS AND SPECIFICATIONS)

STUD M9X109 TO DRG NO. 350-07-2(AS PER DRAWINGS AND SPECIFICATIONS)

STUD M14X75 TO DRG NO. 20-50-03-1(AS PER DRAWINGS AND SPECIFICATIONS)

SHOE/219.35. 126

BRACKET WITH FUEL DEVICES ASSY/172.33. 013CB-5CB

CYLINDER HEAD COVER RH TO DRG NO. SB 306-08-8

CAMSHAFT BEARING ASSY. TO DRG NO. SB 20-06-04

GEAR BOX OIL SPN. API GL-4, OR MIL-L-2105, OR IS 1118-EP TYPE GL-4 SERVO GEAR HP90(IOC), OR SPIROL E

CIRCULATING & HYDRAULIC OIL (ANTI-WEAR TYPE) GRADE VG-68 TO SPECIFICATION IS 10522-1983. OIL SERVO S

XLPE Cables for Working Voltages From 3.3 KV up to and Including 33 KV as per IS 7098 (Part 2) (Q3), XLPE Cable for Working Voltages up to and Including 1.1 KV as per IS 7098 (Part 1) (Q2) (3 (3 ))

GENERATOR VG - 7500 N TO DRG NO. SB 20-09-01-6

STEEL PIPE OUTER DIA 15 X 1.5 X STD. LENGTH IN MM TO EQ. MATL CDS 200 TO IS: 3601-84.

GRINDING WHEEL RECESSED BOTH SIDE TYPE SIZE: DIAMETER: 300MM, WIDTH 50MM, BORE DIA: 76.2, COUNTER BORE DI

GASKET/172.03. 105

7 ITEMS

MINIATURE CIRCUIT BREAKER, DOUBLE POLE MCB 40A CAPACITY 9KA MAKE: HAVELLS/INDO ASIAN/LEGRAND/L&T/SIEM

DIGITAL 4 POLE EARTH RESISTANCE METER WITH RANGES (0.01 TO19.99), (0.1 TO 199.9) (1 TO 1999) OHMS, R

DIGITAL INSULATION RESISITANCE TESTER 5KV MAKE: MEGGER MODEL: BM5500 (OR) EQUIVALENT.

COUPLING/175.41. 091/F

HANDLE. LOCK/432.11. 053-1/F

6206211104 SPINDLE 172.28. 062-1

Customized AMC/CMC for Pre-owned Products - ANNUAL MANINTENANCE CONTRACT FOR THERMO GRAVIMETRIC ANALYSER Q50 ON WHOLE JOB BASIS; WATERS INDIA PRIVATE LIMITED; Annual Maintenance Contract (AMC); Six- Monthly; No

BRUSH ELECTRICAL CONTACT 5977-001055 ( 555-047)

MINIATURE CIRCUIT BREAKER 240/415VOLTS, 32 AMPS, SINGLE POLE MAKE: L&T/ABB/LEGRAND/HAVELLS/SCHNEIDER

SUB ASSY ROTER TO DRG NO. 92-1106-200

WRENCH/434.03. 020CB-2CB

AC/DC DIGITAL CLAMP METER (TONG METER) VOLTAGE RANGE-AC/DC -750V/1000V, CURRENT RANGE-AC/DC - 1000A/1

PIPE(ASSY DRG) TO DRG NO. SB 401-10

FILTERING ELEMENT TO DRG NO. SB 20-13-05-1

STARTER C5-2C TO DRG NO. SB 20-09-02-2

INSERTION (FULL MACHINING) TO DRG NO. 20-08-218-5 (AS PER DRAWINGS AND SPECIFICATIONS)

STARTING VALVE BUSH TO DRG NO. 306-19-2(AS PER DRAWINGS AND SPECIFICATIONS)

TA IN M/CING OF BEARING CAP STUD TO DRG NO. 301-18- 1B TO SIZE/GROUP -0 OPN NO. 050-240

SETTING RING TO DRG NO. 402-31-2(AS PER DRAWINGS AND SPECIFICATIONS)

LOCKING RING TO DRG NO. 411-97(AS PER DRAWINGS AND SPECIFICATIONS)

COVER/CAP TO DRG NO. 20-63-26-1 (AS PER DRAWINGS AND SPECIFICATIONS)

RING (SEALING RING FOR COC COVER) TO DRG NO. 313-17- 2(AS PER DRAWINGS AND SPECIFICATIONS)

NUT TO DRG NO. 305-45-1(AS PER DRAWINGS AND SPECIFICATIONS)

STEEL 40 X ROLLED BAR 56 MM DIA, GOST4543-71. HRD BHN285-341.56MM DIAX645MM LONG. TODRG NO. 20-05- 123-7

PANEL/176.30. 001

SWIVEL ELBOW/172.33. 242CB-1CB

SUPPLY OF SET OF BEARING AS PER ANNEXURE" BEARING KV-III" MAKE-SKF”

RATE GYRO UNIT/BC2.369. 016-4/RCT

VALVE SEAT TO DRG NO. 306-22-1