Armoured Vehicles Nigam Limited Tender Results

PERCENTAGE RATE CONTRACT FOR MINOR / PETTY DAILY REPAIR WORKS IN PUBLIC BUILDINGS AT HVF ESTATE

WELDING ELECTRODE SIZE 5.00 MM DEPOSITING 18Cr, 8Ni, 6Mn, STAINLESS STEEL WELD METAL. SPECN. CQA (M)

WELDING ELECTRODE SIZE 4.00 MM, DEPOSITING 18Cr, 8Ni. & 6Mn, Stainless Steel Weld Metal., Specn. CQA

WELDING ELECTRODE SIZE 3.15 MM, DEPOSITING 18Cr, 8Ni. & 6Mn, Stainless Steel Weld Metal., Specn. CQA

Vehicle Hiring Service - Per Vehicle-Day basis - SUV/MUV; THE VEHICLE TO BE SUPPLIED SHOULD NOT BE MORE THAN THREE YEARS OLD DURING THE WHOLE

OXYGEN GAS MULTI- STAGE REGULATOR ESAB, DURA, MODEL: 0-10, MAXIMUM INLET PRESSURE: 230 BAR, MAXIMUM

Custom Bid for Services - Conservancy Work at HVF Similar Category Collection & Disposal Waste Management Service

Custom Bid for Services - Hiring of Mini bus Non AC 11 seater of tariff 08Hrs and 25Kms per day on as and when required basis Qty 313 vehicle trips Similar Category Vehicle Hiring Service - Per Vehicle-Day basis

ROUND 30MM GR: 65C2BA

INNER DISC/172.56. 009-B

2-56 X 1/4 INCH LONG UNC SOCKE T HEAD CAP SCREW, 99903165M, 48215-MS16995-2, SCREW CAP SOCK ZNPLM5 X 16.1 00064375N 53113-ISO4762-M5X16- 10.9-ZNPL, SCREW FH SOCK CRES M5 X 12 HEX00150450N 48015- 55047.050. 012, SCREW SOCK CRES M5 X 1600109216N 46210-IN7991-M5 X16-A4-PSVT, SCREW CAP SOCK ST M3X10X10.9Z00060480N 53113-DIN912-M3 X 10-10.9-A2G

SPRING TO DRG. NO. BLH-38-105. (672-38-105) ., SPRING TO DRG. NO. BLE-75-025. (675-75-25) ., SPRING TO DRG NO. 700-38-1305., SPRING TO DRG. NO. BLH-38-1255. (700-38-1255) .

RIGHT HAND REAR RIB ASSY/172.04. 189CBCB

SET OF GAUGES FOR FOLLOWING HYDRALIC SHOCK ABSORBER ASSEMBL Y COMPONENTS: I) DESIGN, MANUFACTURING &

Custom Bid for Services - HIRING OF ONE COST ACCOUNTANT HAVING CMA DEGREE AS PER SCOPE OF WORK FOR ONE YEAR ON WHOLE JOB BASIS Similar Category Facility Management Services - LumpSum Based

LOCK WASHER/150.40. 119

GUARD FOR SPROCKETS/ADK9690.8062-1

NUT TO DRG NO. 1201-81(AS PER DRAWINGS AND SPECIFICATIONS)

STUD M10 X 125 TO DRG NO. 3350-92-1(AS PER DRAWINGS AND SPECIFICATIONS)

INJECTOR WITH FILTER TO DRG NO. SB 20-17-00 1

SHAFT WITH IMPELLER TO DRG NO. SB 411-22-33

BUSHING 765-100-184, NUT TO DRG NO 700-30-361, SPACER RING 700-39-181

APOLLO 600-16 SIZE TYRES WITH TUBES-2NOS & APOLLO 13.6-28 SIZE TYRES WITH TUBES-2NOS (TOTAL 1SET) FO

AXLE, DRG. NO. 172.52. 121, BUSH, DRG. NO. 172.52. 122, DRG NO 172.52. 017

GEAR(STAMPING) DRG. NO. EG-54-120-106-3.

ADJUSTING RING 175.45. 033

HANDLE, WINGED DRG. NO. 04-749-8653112 DS CAT NO. 6920-000199

METAL STOOL SIZE: 300(L) X300(W) X600(H)

CATCH TO DRG. NO. 765-78-1449

GASKET DRG. NO: 700-31-368, ROD THREADED END 672- 78-14

STRAP, STOP TO DRG. NO. 172.46. 095

WRENCH SOCKET 18 (SE 18 IS: 2030-1989 TABLE-2, CLAUSE-4.1)/IS: 2030-1989(SE18)

MULTI PURPOSE TAWA INDUCTION BASE/TAWA-22-TO- 25CM-DIA

SET OF PLUMBING MATERIAL AS PER ANNEXURE-A

Rear Glass ( with Rubber Beading) for Upgraded MPV 4X4 Drg. No-2674-57-31, Wind Shield Glass ( with Rubber Beading) for Upgraded MPV 4X4 Drg. No-2673-57-31, Driver Side Glass ( with Rubber Beading) Army Ver. Upgraded MPV 4X4 Drg. No-2668-57-31, Co Driver Side Glass ( with Rubber Beading) Army Ver. Upgraded MPV 4X4 Drg. No-2669-57-31, Side Glass (Trooper) with Rubber Beading Army Ver. Upgraded MPV 4X4 Drg. No-2667-57-31

WINDOW BLINDS (GREY COLOUR)

Split Air Conditioner, Wall Mount Type (V3) ISI Marked to IS 1391 (Part 2) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

SLEEVE FORGING TO DRG NO: 765-50-2487, FULLY MACHINED AND FINISHED CONDITION

H R SHEET 4 MM THICK X1250X2500 MM IS 1079 GR“ O” SK

ADJUSTINTG SLEEVE TO DRG. NO. 172.46. 075, ADJUSTING SLEEVE 172-46-018

WASHER PLAIN 10.01. 019 TO DRG. NO. MPF/TG-EG-BMP II/11371

6201210268 WASHER 184.10. 205, 6206109052 WASHER 172.11. 104, 6206109088 WASHER 434.11. 041, 6206401220 WASHER LOCK 54.40. 158, 6206404020 WASHERTAB 175.43. 004

RING 150.31. 1545.

PIPE MIDDLE TO DRG NO. SB 3321-149

INSERT, DRG NO. 175.52. 023-1

HAND WHEEL RIM TO DRG. NO. 2A20-21-198., HANDLE. DRG. NO. BLT-74-035. (675-74-35) .

6206211174 BOLT 172.28. 187 STEEL38XC GOST: 4543-71, 6206409016 BOLT 172.46. 089-01, 6206409022 BOLT 175.46. 003

CLIP ASSY TO DRG NO. SB 321-04 4, CLIP ASSY TO DRG NO. SB 421-18 2

PLUG: 172.98. 021, PLUG TO DRG. NO. 172.98. 024, PLUG RO DRG. NO. 172.98. 023., PLUG TO DRG. NO. 172.98. 022 FOR DELIVERY PUMP ASSEMBLY TO DRG. NO. 172.46. 010CB-1CB.

SET OF MACHINERY SPARES OF SIEMENS MAKE AS PER LIST ENCLOSED IN ANNEXURE-B (31 ITEMS)