Armoured Vehicles Nigam Limited Tender Results

VALVE 765-05-CD211

WASHER TO PART NO 672-31-114

DRIVING COUPLING WITH CONES TO DRG NO. 172.45. 051 cb cb

INSERT FOR CORO MILL LONG EDGE CUTTER DIA: 100MM REF. SANDVIK ORDER NO: R390-180612M-PM 4040. MAKES: S

BALL BEARING THRUST, SKF 51108 SIZE: 40X60X13MM., BALL BEARING SINGLE THRUST 50X70X14 SKF 51110 8110., THRUST BALL BEARING. SKF-51105

INJECTOR 765-06-CD248

CABLE ASSY NO. 28/188.70. 063CBCB

42U RACK WITH ACCESSORIES AS PER TECHNICAL SPECS ATTACHED AS ANNEXURE-'A'.

6206209004 RAMMER CHAIN/172.26. 004CB-5

Sewing Machine as per IS 1610 (Q3) (3 (3 ))

ENCODER FOR SYNCHRONOUS MOTOR COMPATIBLE SUCCESSOR FOR 6FX2001-3JC22- 3DA0. MAKE: SIEMENS., NCODER FOR SYNCHRONOUS MOTOR COMPATIBLE SUCCESSOR FOR 6FX2001-5JE20- 2DA0. MAKE: SIEMENS, ENCODER FOR SYNCHRONOUS MOTOR COMPATIBLE SUCCESSOR FOR 6FX2001-5JE24- 2DA0, MAKE: SIEMENS.

ASSY TANK OIL EXTERNALLY MOUNTED/175.33. 012CB- 1ACB

RING HOLDER TO DRG NO. 20-05-59-3 (AS PER DRAWINGS AND SPECIFICATIONS)

PLATE TO DRG NO. 3334-204-2(AS PER DRAWINGS AND SPECIFICATIONS)

CLAMP RING/V548.0121. 2013

PART LIST OF HULL WIRES/172.70. 038CB-5

PCD WEAR PAD SET (3 NO'S PER SET) TO DRG NO. GRP0100E, MAKE: ARBOTECT FOR CAMSHAFT GRINDER, (LANDIS) M/C

WASHER KEY DRG NO: 672-31-71, LOCK RING 700-39-303, GASKET DRG NO. 700-40-237-01., GASKET 700-40-143, PIN TO DRG NO: 700-47-242, COVER 675-53-132., WIRE ROPE TO DRG NO. 675-56-CD150, CLAMP TO DRG NO: 765- 56-154

Monthly Ambulance Service (All Inclusive) - All inclusive service; Type D Advance Life Support Ambulance; Single Stretcher Premium Van; No preference

Hiring of Third-Party Inspection Agency - Metals & Fabricated Metal Products; To be entered by buyer as per domain; Quality Management Systems of Manufacturers (IOS 9001:2015) and accredited for Certification of Conformity Assessment Requirement a..

FLANGE TO DRG NO: 172.27. 127-1 LF NO: 6206210115

PLUG AMG-6 TO DRG NO: 172.25. 067 LF NO: 6206208039

STEEL 65C2BA ROUND STEEL 36MM DIA

BIMETAL BANDSAW BLADE FOR CUTTING MACHINE SIZES: 7300X41X1.3 X2/3 TPI, MAKE: LENOX-USA, WIKUS-BIFLEX- CO

SINGLE POINT PARALLLEL SHANK DIAMOND DRESSER WITH NATURAL DIAMAND. SHANK DIA: 12MM. SHANK LENGTH: 15

TUNGSTEN CARBIDE ROTARY BURRS OF CYLINDRICAL SHAPE SIZE: STD. CUT= A-0820, HEAD DIA8MM SHANK DIA 6MM S

LOCK WASHER 11 TO DRG NO. 353-15(AS PER DRAWINGS AND SPECIFICATIONS)

JUMPER/188.70. 085CBCB, JUMPER/188.70. 086CB-ACB, JUMPER ASSY/172.70. 253CB-CB, CABLE AND HARNESS HVF/BLT/T72/70B

BAR/1015.004215

GEAR (FORGING) UPTO OPN NO. 0-020 TO DRG NO. 308-65- 4(AS PER DRAWINGS AND SPECIFICATIONS)

CABLE NO. 6/172.74. 041CB-2

INSULATOR TO DRG. NO. 675-58-184 AS PER QAI/Rubber/CQA(ICV)/005 DEC. 2003

SCREW HEXGONAL HEAD POLISHED(TYPEB6LS) 10X19 TO DRG. NO. N2-71, SCREW SLOTTED WITH CYL HD. (TYPE ECS) DRG. NO. N2-87-6X19., SCREW COUNTER SUNK HEAD. DRG. NO-N2-29-FS-8X55.

NDUSTRIAL SAFETY SHOE SIZE-05 OF MODEL LOW ANKLE DIRECT INJECTED DUAL DENSITY PU SOLE MOULDED WITH S, INDUSTRIAL SAFETY SHOE SIZE-06 OF MODEL LOW ANKLE DIRECT INJECTED DUAL DENSITY PU SOLE MOULDED WITH, INDUSTRIAL SAFETY SHOE SIZE-07 OF MODEL LOW ANKLE DIRECT INJECTED DUAL DENSITY PU SOLE MOULDED WITH, INDUSTRIAL SAFETY SHOE SIZE-08 OF MODEL LOW ANKLE DIRECT INJECTED DUAL DENSITY PU SOLE MOULDED WITH, INDUSTRIAL SAFETY SHOE SIZE-09 OF MODEL LOW ANKLE DIRECT INJECTED DUAL DENSITY PU SOLE MOULDED WITH, INDUSTRIAL SAFETY SHOE SIZE-10 OF MODEL LOW ANKLE DIRECT INJECTED DUAL DENSITY PU SOLE MOULDED WITH, INDUSTRIAL SAFETY SHOE SIZE-11 OF MODEL LOW ANKLE DIRECT INJECTED DUAL DENSITY PU SOLE MOULDED WITH, INDUSTRIAL SAFETY SHOE SIZE-12 OF MODEL LOW ANKLE DIRECT INJECTED DUAL DENSITY PU SOLE MOULDED WITH

Hearing Protectors (V3) Conformingto IS9167 (Q3)

PLATE GR: ST 40-3-T 12MMX1400MMX3000MM LG, PLATE STEEL GR: 09G2-6 8MMX1400MMX3000/3500MM LG

CQA(ICV)/SET/047 CONSISTING OF COVER 765-22-CD286 AND BODY 765-22-CD189K

SUPPLY & INSTALLATION OF THE SPARES ASSY TRANSFOR 200 KHZ SP11 14815-072 OF INDUCTION HARDENING MACH

RUBBER ITEMS FOR M. P. V. AS PER DRG. NO. MPV/HULL/093/A CONSISTING OF 1. MUD RUBBER-4NO/SET, 2. TROOPE

FORGING FOR BODY DRG. NO. FG-765-15-157-3

DESIGN AND DEVELOPMENT OF SUSPENSION SYSTEM FOR FICV AGAINST RSQR No. 98002/FICV/SS/ANALYSIS/2025-26

CIRCULATING AND HYDRAULIC OIL (ANTI-WEAR TYPE) GRADE VG-32 TO SPECIFICATION IS-10522- 1983. OIL SERV

MOULD CURRING CONTAINER TO DRG. NO. 57/FDY/002

TUNGSTEN CARBIDE ROTARY BURRS, SHAPE: RIM(EDGE CUT) HEAD DIA: 15MM, HEAD LENGTH: 4MM, SHANK DIA: 6MM NO OF

TUNGSTEN CARBIDE ROTARY BURRS OF INVERTED CONE SHAPE: NE-0818 HEAD DIA: 7.5MM SHANK DIA= 6MM, EDGE LENG

TUNGSTON CARBIDE ROTARY BURRS (NON-FERROUS RANGE) SHAPE: BALL NOSE CYLINDRICAL, NO. OF TEETH: 8, HEAD DIA

6206102433 GASKET/175.02. 543

6201019009 OUTER SHIELDING/188.19. 178, 6201019007 OUTER SHIELDING/188.19. 176

6206803356 SHIELD/184.04. 035

STUD (M10X110) TO DRG NO. 20-50-08(AS PER DRAWINGS AND SPECIFICATIONS)