Armoured Vehicles Nigam Limited Tender Results

BUSH TO DRG C5-128(AS PER DRAWINGS AND SPECIFICATIONS)

SOCKET SCREW KEY 6MM/IS: 3082(6MM)

ILLUMINATION PANEL ASSEMBLY DRAWING/188.70. 113CB- 1CB

PIN/54.26. 098-A, PIN/GOST: 9650(8X32)

FAN ASSY/175.70. 024CB

Toner Cartridges/Ink Cartridges/Consumablesfor Printers (Q2)

Passenger Car (Q1)

FULLY FINISHED(WITHOUT MATERIAL) STUD M4 TO DRG NO 042359A-00. FOR SRCG DRIVE ASSEMBLY AZIMUTH

COMPLETE MACHINING ASSISTANCE FOR SHAFT FOR LIFTTING MECHANISM BMP-II TO DRG. NO. 675-54-199

MACHINING ASSISTANCE FOR TURNING OPERATION OF PARTITION DRG NO. 172.52. 140-1A AS PER SCOPE OF WORK

Percentage rate contract for Repair and Maintenance of open drainage system of VFJ Estate based on MES SSR 2020.

MACHINING ASSISTANCE FOR TURN MILL OF COVER 172-45- 076-1.

MACHINING ASSISTANCE FOR TURN MILL OPERATIONS OF PLUG TO DRG. NO. 188-94-038.

COVER 172.45. 340

Bluethooth Enabled Measurement Instrument-25 Nos., Wireless data receiver unit 2 Nos., data analysis

PACKING 672-78-100 AS PER QAI/Rubber/CQA(ICV)/005 DEC. 2003, RUBBERCAP 8Db 307.022

CASING 730-77-CD111

SIEMENS-NX (AUTOMOTIVE SUPPLIER ADVANCED ENGINEERING BUNDLE)

VALVE WITH COCK/172.85. 025CBCB

CARBIDE INSERT TCMT 110304 PF4325 COATED HVF8900- 01230

AXLE 765-50— 2489

Request for proposal for Design, Development and Manufacturing of Power Take-Off Gear Box (PTO_GB) AVNL ARV

APRON 36" X 24" (HEIGHT X BREADTH), MATERIAL: COTTON DRILL, IS: 177-1989, VARIETY NO-3, GSM - 245, CO

REQUEST FOR PROPOSAL FOR DESIGN, DEVELOPMENT AND SUPPLY OF ENVIRONMENTAL CONTROL UNIT FOR AROMOURED RECOVERY VEHICLE

GASKET 700-40-234, GASKET 765-78-540

PIPE TO DRG NO. 765-08-CD511

Fixture for Flaring Out the Insert ADK 9690.4771, Fixture for Setting the Rack Tank ADK 7879.7584

ASSY DRIVE COUPLING(HOUSING) TO DRG NO. SB 3334-10- 8

BAG TO DRG NO. SB 530-200 2

BRACKET/175.74. 034

EXTENSION PIECE ASSY. 675-93-SB114

WIRE ASSEMBLY DRAWING/188.71. 073CBCB, WIRE ASSEMBLY DRAWING/188.71. 108CBCB

ASSY FILTER SMALL/V548.0124. 0012

Custom Bid for Services - HIRING OF 5 ACCOUNTANTS FOR FINANCE (MBT) SECTION FOR ONE YEAR (1500 MANDAYS) AS PER THE SCOPE OF WORK AT HVF A AVADI ON WHOLE JOB BASIS Similar Category Facility Management Services - LumpSum Based

ASSY. OF CYL. HEAD COVER RH & LH TO DRG NO. SB 20-06- 08-2 & 09-2

ASSY SEALING RING TO DRG NO. SB 20-05-51-2

SETTING RING TO DRG NO. 402-31(AS PER DRAWINGS AND SPECIFICATIONS)

RING TO DRG NO. 20-06-111(AS PER DRAWINGS AND SPECIFICATIONS)

STUD M9X 40 TO DRG NO. 350-27(AS PER DRAWINGS AND SPECIFICATIONS)

STUD M 8 X 50 TO DRG NO. 20-50-26(AS PER DRAWINGS AND SPECIFICATIONS)

BUSH TO DRG NO. 20-11-69-2 (AS PER DRAWINGS AND SPECIFICATIONS)

TIGHT FITTING BOLT M8X44 TO DRG NO. 356-79(AS PER DRAWINGS AND SPECIFICATIONS)

GASKET/54.06. 23CB-D

GASKET/172.30. 017-04, GASKET/172.30. 017-05

SWITCH PH-45M OR PH-45M-2/TY16-526.016-73

CROW BAR/172.91. 508

SET OF 13 VARIOUS SIZES OF SOLID CARBIDE DRILLS PVD COATED, AS PER STANDARDS: DIN 6537, AS PER LIST

SET OF 08 TYPES OF STANDARD INSERTS AS PER LIST ENCLOSED IN ANNEXURE-I MAKE: ONLY ISCAR ACCEPTABLE ( 1 set ), ONLY ISCAR ACCEPTABLE ( 1 set ), SET OF 05 TYPES OF SPECIAL TOOL ACCESSORIES, AS PER LIST ENCLOSED IN ANNEXURE-III. MAKE: ONLY ISCAR ( 1 set )

MOUNTING OF SUPER CHARGER TO DRG NO. SB 3338-00-16

RETROFITTING OF STUDER S45-4 CNC Internal Grinding