Board Of Technical Education Tender Results

Multifunction Machines MFM (Q2)

Multimedia Projector (MMP) (Q2)

Domestic Refrigerators-IS 1476

Desktop Computers

Graphics Tablet

Restaurant Table, Plastic Moulded Chair Experience Criteria 1 Year (s)

Television TV

Lathe Machine

resistance welding equipment/rocker arm spot welding machine Experience Criteria 1 Year (s)

Executive Table ( PAC Only ), Class Room Desking Seating ( PAC Only ), Meeting Table ( PAC Only ), chairs-office ( PAC Only ), medical stools or chairs ( PAC Only ), Classroom Chairs ( PAC Only )

Plastic Moulded Chair ( PAC Only ), Almirah Steel ( PAC Only ), Steel Bookcases ( PAC Only ), Metal Shelving Racks ( PAC Only )

Almirah Steel

Multifunction Machines MFM

Classroom Tables, Classroom Chairs

chairs-office, revolving chair

Multimedia Projectors

Laptop-Notebook

Air Conditioner

Desktop Computers

Language/multilingual software foreign language software

Multifunction Machines

Televisions

office suite software - MS Office etc

Electronic Weighing Scales

lead acid battery Experience with Gov. Required 1 Year (s)

Printer

Multifunction Machines

Line Intractive UPS with AVR Line Intractive UPS With AVR ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 0.65/168 0.65/168 Technology MOSFET-PWM MOSFET-PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz Degree of protection IP-21 IP-21 Inverter Efficiency (%) >/= 60% >/= 60% Warranty for the battery from the date of delivery 1 year 1 year, 3 Years Warranty for Line Interactive UPS 2 Years 2 Years Installation and commissioning instructions No * 1/4 CONSTRUCTIONAL Type of enclosure ABS * AC out put for printer (not through inverter) No No Inverter out put socket AC out put for printer (not through inverter) Not applicable Not applicable FUNCTIONAL Total harmonic distorsion (%) </= 40% * Input (Volt) Single phase sinewave(160-280v) * Switching over time (Mili sec) Maximum 10 milli seconds * Overload Time (Minutes) >/= 10 minutes * Load power factor >/= 0.6 * Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz * Overload (%) >/=10% * Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% * Variation on output frequency in battery mode (Hz) </=0.5 * PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 * Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes * Protection against short circuit of UPS Yes * Protection for over voltage and over load Yes * REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 Yes * 2/4 pt-5/sec-1 Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes * Cold Test as per IS:9000 pt-2/sec-4 Yes * Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes * Type Test certificate no. and date - * Name Of Lab - * Address of Lab - * As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Man Mohan Porwal 313001, Udaipur 2 15

Notebook Computers-laptop

Printer or photo Copier Paper Experience with Gov. Required 1 Year (s) Printer Or Photo Copier Paper ( 800 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes * Test Method as per IS: 1060 Yes * Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297 Size of the Paper A4 A4 GSM of Paper 75 75 Quantity Number of Sheets per Ream 500 500 (or higher) Physical Characteristics Brightness in % 85 85, 85.001, 85.0013, 85.002, 85.01, 85.225, 85.5, 85.6, 85.6578 Tensile Index MD in Nm/g 45 * Tensile Index CD in 28 * 1/2 Nm/g Opacity in % 88 * Tear Index (Avg) in Nm.m²/g 5 * Smoothness for both sides (Bendtsen) in ml/min 175 * Thickness in µm 98 * Moisture in % 5 * Stiffness MD 3 * Stiffness CD 1.5 * Surface Strength Dennison (Wax Pick) >= 12 A 12A * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Devendra Tiwari 334004, Karni Industrial Area, Pugal Road, Bikaner 800 15

Multifunction Machines

deposit safe Deposit Safe ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Class of Safe as per IS:550 Part1 Class-D (Door with tool resistance capacity of 15 min and resistance to trapping/fishing deposited envelops or bags for 15 minutes) * Size as per IS:550 470 SINGLE DOOR 470 SINGLE DOOR, 580 SINGLE DOOR, 850-S SINGLE DOOR, 850-L SINGLE DOOR, 1030 SINGLE DOOR, 1340 SINGLE DOOR, 1640 SINGLE DOOR, 1860 SINGLE DOOR, 1340 DOUBLE DOOR, 1600 DOUBLE DOOR DIMENSION Inside dimension of safe as per IS:550 Part 1 table-2 * Height of Deposit safe 580 * Width of Deposit Safe 415 * Depth of Deposit Safe 365 * 1/4 Total Thickness of outer body plate and inner plate (in mm) 7 * Thickness of door slab (Thickness over rebate) in mm 14 * Thickness of door over bolt work (in mm) 25 * Thickness of drill resistance Iaycr, shielding bolt work and lock (in mm) 3.15 * Size of each bolt (Minimum Area of bolt section) in Square Milimeter 800 * Depth of engagements of the bolts, in mm 15 * TOLERANCES IN DIMENSIONS AS PER IS 550 * CERTIFICATION ISI marked (IS:550, Part 1) Yes Yes, NO CM/L NO - * Test reports to be furnished to buyer on demand YES * MISC Anchoring arrangement With * Color Others * COMBINATION LOCK IN ADDITION TO NUMBER OF KEY LOCKS GIVEN IN IS 550 NO ADDITIONAL LOCK * Provision for retrofitting time lock NO * NUMBER OF LEVERS IN MAIN LOCK 8 * THICKNESS OF LEVERS IN mm 1.2 * Number of bolts on hinge side 3 * Number of bolts on side opposite of hinge side 3 * Number of bolts at the top NO BOLTS AT TOP * Number of bolts at the bottom 2 * 2/4 Number of Adjustable shelves 1 * Number of Drawers 1 * Handle Material Stainless Steel * WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 5 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Man Mohan Porwal 313001, Udaipur 1 15

almirah- Steel Almirah- Steel ( 10 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest true * No of shelves (Nos) 3 * Type of Shelves Fixed * Locker Provided false * Locking System with the locker NA * Cloth hanging provision in the Almirah false * Number of Doors (Nos) 2 * Door Stiffner upto full door height Provided with the almirah doors true * Number of Hinges with each door (Nos) 2 * Number of Glass Sheet fixed in each Almirah door (Nos) N.A * 1/4 Construction Welded * Lock Three Way bolting device controlled by lock * MATERIAL Material M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet, 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame, 3mm thick polycarbonate sheet fixed in the ms sheet frame, perforated MS sheet Sheet Thickness of Locker 0.7 mm * Length of Glass Sheet ±10 (mm) N.A * Width of Glass Sheet ±10 (mm) N.A * Sheet Thickness of door in mm 0.8 mm (Minimum) * Sheet Thickness of sides, back, Top and Bottom 0.7 mm minimum (Not as per IS 3312) * Sheet Thickness of Shelves 0.8 mm * Sheet Thickness of Pedestal in mm 0.9 mm * Material of Lock lock having made of steel with zinc plated finish having brass levers and MAZAK ZAMAK bolts having zinc plated finish along with MAZAK/ZAMAK handle * Material of Keys keys made of MAZAK ZAMAK having nickle plated finish * DIMENSION Height (Without 1155 1000, 1155, 1855, 2/4 Pedestal) (in mm) (+/- 10 mm) 1800, 2000, 850, 1050, 1325, 1450 Width in mm (± 7 mm) 760 760, 910, 1023, 700 Depth in mm (±5 mm) 430 430, 455, 480, 486, 270, 370, 400 Inside Height of Locker in mm (± 5 mm) N.A * Inside Width of Locker i mm (±5 mm) N.A * Inside Depth of Locker in mm (±5 mm) N.A * Width of Stiffner in mm (±5 mm) 115 mm * Thickness of MS Sheet of Stiffner (in mm) 0.7 mm * Stiffened Pedestal height in mm (±2 mm) 125 * Pedestal Width in mm (±2 mm) 75 * COLOUR & FINISH Finish Synthetic enamel * Colour of Paint dark gray * Packing: Gutta Packing * CERTIFICATION ISI marked false * WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 2 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Man Mohan Porwal 313001, Udaipur 10 15

Desktops

Modular Table

Modular Table

Classroom Stools

almirah- Steel Almirah- Steel ( 10 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest true * No of shelves (Nos) 4 * Type of Shelves Fixed * Locker Provided false * Locking System with the locker NA * Cloth hanging provision in the Almirah false * Number of Doors (Nos) 2 * Door Stiffner upto full door height Provided with the almirah doors true * Number of Hinges with each door (Nos) 3 * Number of Glass Sheet fixed in each Almirah door (Nos) N.A * 1/4 Construction Welded * Lock Three Way bolting device controlled by lock * MATERIAL Material M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet, 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame, 3mm thick polycarbonate sheet fixed in the ms sheet frame, perforated MS sheet Sheet Thickness of Locker N.A * Length of Glass Sheet ±10 (mm) N.A * Width of Glass Sheet ±10 (mm) N.A * Sheet Thickness of door in mm 1.0 mm * Sheet Thickness of sides, back, Top and Bottom 1.0 mm * Sheet Thickness of Shelves 1.0 mm * Sheet Thickness of Pedestal in mm 1.0 mm * Material of Lock lock having made of steel with zinc plated finish having brass levers and MAZAK ZAMAK bolts having zinc plated finish along with MAZAK/ZAMAK handle * Material of Keys keys made of MAZAK ZAMAK having nickle plated finish * DIMENSION Height (Without 1855 1000, 1155, 1855, 2/4 Pedestal) (in mm) (+/- 10 mm) 1800, 2000, 850, 1050, 1325, 1450 Width in mm (± 7 mm) 910 760, 910, 1023, 700 Depth in mm (±5 mm) 480 430, 455, 480, 486, 270, 370, 400 Inside Height of Locker in mm (± 5 mm) N.A * Inside Width of Locker i mm (±5 mm) N.A * Inside Depth of Locker in mm (±5 mm) N.A * Width of Stiffner in mm (±5 mm) 125 mm * Thickness of MS Sheet of Stiffner (in mm) 0.8 mm * Stiffened Pedestal height in mm (±2 mm) 125 * Pedestal Width in mm (±2 mm) 80 * COLOUR & FINISH Finish powder coated * Colour of Paint ash gray * Packing: Corrogeted Paper Packing * CERTIFICATION ISI marked false * WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 2 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Man Mohan Porwal 313001, Udaipur 10 15

Executive Table, revolving chair Executive Table ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Mode of supply Knocked Down To Be Assembled At Consignee Site By The Seller Assembled Ready To Use, Knocked Down To Be Assembled At Consignee Site By The Seller, Knocked Down To Be Assembled At Consignee Site By Consignee Himself Frame type Free standing * Understructure of table Gable end and modesty panel * Storage provided One side One side, Both side, No Storage Keyboard tray Not provided Provided, Not provided Foot rest Not Provided Provided, Not Provided MATERIAL Table top Material Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest MDF board of grade SBG II of IS 12406/Latest, Three layer prelaminated particle board(Wood Product) of grade II 1/9 type II of IS 12823/Latest, Commercial Block Board BWP grade Conforming to IS 1659, Decorative Block Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Carved teak wood, Other wood Gable end and modesty panel material Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest Flat single layer prelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/Latest, Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest, Other wood, NO Gable end and modesty panel Leg Material Other wood Teak wood, NO LEGS MISC Table top long sides To be post form half round profile with corner edge bending * Table top plain sides Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue * Gable end and modesty panel plain side CP Teak Wood Lipping * 2/9 Number of buffers provided N.A * DIMENSION Thickness of table top ±2mm 38 5, 9, 12, 15, 19, 25, 38 Thickness of gable end and modesty panel ±2mm 12 * Length of table top ±10mm 2100 900, 1200, 1500, 1800, 2100, 1372, 1830 Depth of table ±10mm 1100 * Height of table ±10mm 750 * Dimension of leg(mmXmm) ±5mm No legs 40mmX40mm, 50mmX50mm, 60mmX60mm, No legs STORAGE UNIT Number of Storage unit provided Double storage Single storage, Double storage, Triple storage, Four storage, No storage Width of storage unit ±10mm 400mm * Depth of storage unit in mm (±10mm) 600 * Height of smallest storage unit ±5mm N.A * Height of medium storage unit ±5mm N.A * Height of largest storage unit ±5mm N.A * KEYBOARD TRAY Type of keyboard tray Wooden keyboard tray * Material of keyboard tray and Right angle L- type supporting bracket Decorative Block Board MR Grade Conforming to IS 1659 * Keyboard adjustablity underdesk keyboard arm * fixing of supporting bracket N.A * Length of telescopic channe±l0mm N.A * Average weight of telescopic channel ±50Gms N.A * Keyboard front width±10mm 600mm * 3/9 Keyboard depth±10mm 350mm * Keyboard height±10mm 100mm * Finish of exposed edges of keyboard tray To be banded with 0.5-1.0mm thick PVC tape with the help of hot melt glue * Material thickness of keyboard tray ±1mm 12mm * FOOTREST Material of footrest N.A * Length of footrest ±10mm N.A * Depth of footrest ±10mm N.A * Height of footrest ±10mm N.A * Finish of exposed edges N.A * Material thickness of footrest ±2mm N.A 5mm, 9mm, 12mm, 15mm, 19mm, 25mm, 38mm, N.A COLOUR & FINISH Table top finish Teak laminate/ply with melamine finish * Table top shade Teak * WARRANTY Warrantee period in number of years 1 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand NO * Product having BIFMA certification NO * OEM of offered product is ISO 9001:2015 certified NO * OEM of offered product is ISO 14001:2015 certified NO * OEM of offered product is ISO 18001:2007 certified NO * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/9 1 Man Mohan Porwal 313001, Udaipur 1 15 Revolving Chair ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt central tilt Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Fixed Colour of Fabric for Seat and Backrest N.A * Ergonomic Seat Design true true Back type fixed push back, fixed, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking N.A * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & 5/9 Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Steel Covered with Wooden Cladding Steel Covered with Wooden Cladding seat material PU Foam Covered With pure leatherite pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam 6/9 Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 * Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite leatherite GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram * DIMENSION Overall Chair Height ±15mm 950 * Backrest Height ±15mm 550 * Backrest Width ±10mm 520 * Seat Height ±15 mm 450 420, 450, 480, 500, 520 Seat Width ±10 mm 520 440, 520, 550, 460, 360 Seat Depth ±10 mm 520 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1.8 * Thickness of Plywood used in Seat ±1(mm) 15 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 15 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 650 * Thickness of 45 mm * 7/9 Polyurethane Foam Used in Seat in mm (+/- 2 mm) Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 35 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Man Mohan Porwal 313001, Udaipur 1 15

Lenovo V520 (PDC-G4560 4Gb 1Tb 19.8HD 3Yrs Win10Pro)

LED STREET LIGHT 70WATT HAVELLS ENDURA

Steel cooler 5000 cum/hr 450mm

Printer

Multifunction Machines

All in one integrated solar street light AXN - 12W

Modular Work Stations/Modular Staff Office

solar street lighting and renewable energy street lighting Solar Street Lighting And Renewable Energy Street Lighting ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Confirm to specification As per MNRE specification for Solar Photovoltaic Lighting Systems &amp; Power Packs - White LED (W- LED) Based Solar Street Lighting Systems - Model as per MNRE Specification Model III Model I, Mdel II, Model III, Model: IV Battery Model III : With Lithium Ferro phosphate battery. Operates from dusk to dawn at full brightness Model I: with Lead Acid Battery. Operates from dusk to dawn at full brightness, Model II:with Lead Acid Battery. Operates from dusk to dawn ( first four hours at full brightness &amp; rest of the time at lower light level, with motion sensor), Model III : With Lithium Ferro phosphate battery. Operates from dusk to dawn at full brightness, Model IV : With Lithium Ferro 1/4 phosphate battery. Operates from dusk to dawn ( first four hours at full brightness &amp; rest of the time at lower level, with motion sensor) Colour temperature of White - LED (deg K) 5500 deg K to 6500 deg K - PV module (Wp) under STC (Wp) Model IV: 30 Model I: 40, Model II: 30, Model III: 40, Model IV: 30 Battery capacity ( 12V-AH @ C/10) to be selected as per model in line with MNRE specification for guidelines 20 AH 20 AH, 40 AH, 120WAh, 160 Wah Scope of supply with errection and commissioning at consignee end with errection and commissioning at consignee end, without errection and commissioning CONSTRUCTIONAL Autonomy For Model I: 3 days or minimum 42operating hours per permissible discharge - Type of Light source White light emitting diode (W-LED) - Light output (Lux) Must declare as per MNRE specification 52 - Duty cycle Dusk to dawn as per MNRE - PV module chemistry Crystalline silicon solar cells - PV module efficiency (%) >/= 12 - No load current consumption (mA) Must declare (not more than 20 mA) </=20 mA - Necessary cables and connectors as part of supply of lighting system Yes - CERTIFICATIONS Battery Type, make and model LITHIUM ION INBUILT - PV module certification For humidity, freeze and damp heat tests - 2/4 certificate conforming to IEC 61215 Edition II BIS 14286 from an NABL or IECQ accredited laboratory Warranty for street lighting system including battery (Years) >/=5 - Warranty for Pv module (Years) >/= 25 - Availability of test reports from Central Government or NABL or ILAC accredited Lab covering all the parameters as per MNRE specification Yes - Test Report No. 103/2415/2015/1/1/SLS - Test Report date 6-10-2015 - Name of Test lab NATIONAL INSTITUTE OF SOLAR ENERGY - Address of the Test lab GAWALPAHARI GURGAON HARYANA - Make Model Number Country of origin and technical charecteristics (including IESNA LM -80 report) of W -LED INDIA - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Medha Vaish 313001, PRATAPNAGAR 1 15 EMD Required No ePBG Required No

Laptop

3 SEATER CROME PLATE BEANCH

Hitachi CP-WX3541WN Multimedia Projector 3700 ANSI lumens WXGA Resolution