Loading
Loading…
Loading…
1,648 live558 closing this weekmost from Central Railway and Indian Railways
1,648 results • Latest
Sliding Doors for Entrance to AC area for LHB AC Chair Car coaches.
Outsourcing of critical maintenace asset of OHE under ANG_Beed_Wadwani Section over Pune Division for a period of two years.
FLEXIBLE BALL CABLE SHORT as per Escorts Drawing No. 3EB8065
Hand operated Hydraulic Crimping tool with die sets of capacity 10 sq.mm to 300 sq.mm and carry bag for transportation.
2 Stroke Air-Cooled Engine Telescopic Pole Pruner, Length 390 Centimeter. Make: STIHL or Equivalent.
Epoxy painting of Tapti Bridge No. 449/1, underslung spans, Up & Dn common @kms 449/3-33 on BSL-KNW section over Bhusawal division.
Improvement of structural life of PSC Road over Bridges by epoxy painting over various sections (KYN-IGP,KYN-LNL,DW-PNVL) of Mumbai division. (18 Bridges)
Conducting a UAV (Drone) based visual inspection and Terrestrial LiDAR based inspection of various bridges over Mumbai Pune and Solapur division under jurisdiction of AXEN(Str) Byculla.
Conducting a UAV (Drone) based visual inspection and Terrestrial LiDAR based inspection of various bridges over Bhusawal and Nagpur division under jurisdiction of AXEN(W/Br) Bhusawal.
Provision of Wall mounted Industrial type Air Conditioner Unit in S&T installations work at various New EI installation buildings in connection with NGP-SEGM 3rd & 4th line and WR(SEGM)- BPQ 3rd line of Nagpur division Central Railway
Provision of Wall mounted Industrial type Air Conditioner Unit in S&T installations in connection with 3rd line work at various location in ET-NGP section of Nagpur division Central Railway
Partial fitting of TWS 1 in 12, 60 kg RDPartial fitting of TWS 1 in 12, 60 kg RDSO drawing no. RT-6155 (1)Slide chair to RDSO drg. No. T-6166 , (2) Leaf spring to RDSO Drg. No. T-6310 , (3) Wedge to RDSO drg. No. T-6305, (4) Wedge to RDSO drg. No. T- 6305/A , Etc ( for each set Qty and Details as per Annexure I )
Vision based Inspection equipment with video camera for inspection of wagons during maintenance as per attached specification.
"Calibration of Master Wheel Set used for Surface Wheel Lathe of ROH depot Ajni".
SAFETY WASHER For UTV Machine. Equivale [SAFETY WASHER For UTV Machine. Equivalent to Palfinger, Part No.: EQ116, Part Make: PHOOLTAS/PALFINGER, BO Sr. No.: 05. ]
Contact Wire Parallel Clamp Piece (6171) Spec: TI/SPC/OHE/Fittings/0130 (10/13) Rev-1, Drw: ETI/OHE/P/6170 Rev.-1.
USB Type A & C charger socket (USB3.0 compliant) 45W as per RCF Specs EDTS 455, Rev. Nil, Amnd. 1 , Corr. 1 or Latest.
INHIBITOR CORROSION Size 205 Liters COMP [INHIBITOR CORROSION Size 205 Liters COMPLETE i.e. 50:50 PREMIX, for RGM machines. Equivalent to Part No.: 3816981/CC2774, Part Make: CUMMINS/FLEETGUARD/ DONALDSON,]
Fuse base for tubular type HRC fuse 4Amp, 1.2KV suitable for use in power panel ( HT side ) of LHB Variant EOG coaches
FUEL FILTER, for T-28 Machine. Part No. [FUEL FILTER, for T-28 Machine. Part No.: 3531-0032A, Make- SUN-VM Motori, HSN Code.: 84212300, AMC No.: 96,]
BEARING For MFI machines. Part No. 6213 [BEARING For MFI machines. Part No. 6213-2RSR, SUBSTITUTE Part No.: 6213-2RSR-L140, MAKE: PLASSER/FAG/INA/IKO/KOYO/ELGES/SKF/MAYFIELD/TORRINGTON. ]
Platform trolley for carrying grease con [Platform trolley for carrying grease containers during Ultrasonic test of EMU rakes. (With front fixed and rear swivel type Rubberise PU wheel dia 300-400 mm with SS bearing capacity up to 500 kg, as per Technical specification attached as Annexure - A.]
TRIPLE PUMP, for DUO machines. Part No.: [TRIPLE PUMP, for DUO machines. Part No.: HY832X38.14.12LI, Denison Part No.: T6DCC-038-014-012-3L00-B1-00, Part Make: PLASSER/VELJAN-DENISON, Note: - 1. Material supplied by firm should be fitted on machine without any modifications and all ports & mounting should match as per existing part on machine and all function of item should work successfully. ]
BUSH FOR BOGIE BRAKE GEAR OF CASNUB BOGIES TO RDSO DRG. NO. SK- 69597, ALT-43 OR LATEST, ITEM NO. 6. Accepted
SUCTION FILTER, for MPT(CRCC) machine. E [SUCTION FILTER, for MPT(CRCC) machine. Equivalent to Part No.: R928040955, SUB.: 6.560.P10.500.0.0, Part Make: CRCC/HENGST/FILTREC, NOTE: Material supplied by firm should be fitted on machine without any modifications and all ports & mounting should match as per existing part on machine and all function of item should work successfully. ]
Pad Locks 50mm Zinc plating, Grade - I, IR stamped, [4 levers] Steel ring fastened two single bitted keys as per IS: 15275-2003(R-2020) Shape 3 rd of Fig - 2 along with the following components: 1] Body : Steel Sheet as per IS : 513. 2] Spring : Spring Steel wire as per IS : 4454 - 2001 (R - 2021)(Any grade) 3] Shackle : Bright Bar as per IS : 9550 - 2024 4] Key : Steel Sheet as per IS : 513-2016 (R - 2021). 5] Levers : Brass sheet as per IS :410 -1977 (R - 2021) Alloy Cu Zn 40. 6] Rivets : Mild Steel wire as per IS : 280 - 2006 (R -2021)
COMPREG WOODEN PACKING CUM WOODEN CLAMP FOR 20 MM PIPE WITH NUT, SPRING WASHER AND BOLT HALF THREADED, PACKING SIZE:- 100x40x40 MM, CLAMP SIZE:- 100x40x38 MM,TO DRG NO. NCR-JHS-SK-2630, ALT. 6 CONFORMING TO RDSO SPECIFICATION NO. C-9407(REV. 4) OF AUGUST 2023 .
Bush for bogie brake gear of casnub bogie to RDSO drg. no. SK-69597 Alt-43, item no.-5, Matl. & Spec. As per as per drawing.
PISTON For UNI Machine. Part No: W37.20 [PISTON For UNI Machine. Part No: W37.2095 SUB.: W37.1295 Make: PLASSER HSN No.: 841290. AMC No.: 10289 ]
Bolster Liner size 153 mm X120 mm X 8 mm thick to IS:3885 Part-I, Grade-IV Hardness 380- 420 BHN. (Ref. Drg.- WD85079-S-3, Alt.-7, Item-2). (Manufacturers initial, month & year of Manufacture marked by metal laser engraving in 6mm type & . 1 mm depth minimum)
Kit for BTPN Valves consisting of 05 items. 1] Valve to RDSO Drg. no. WD-86081- S-66 Alt. 16, item no.-5, Qty.-2 nos. 2] Valve seat to RDSO Drg. no. WD-86081-S- 66 Alt. 16, item no.-2, Qty.-2 nos. 3] Valve spindle to RDSO Drg. no. WD-86081- S-61 Alt. 16, item no. 10, Qty.-1 no. 4] Valve operating screw to RDSO Drg. no. WD-86081-S-66 Alt. 16, item no. 4 Qty.-1 no. 5] Valve spindle nut bottom to RDSO Drg. no. WD-86081-S-66 Alt. 16, item no. 12 Qty.-12 nos. Material and specification as per drawing.
NLB/HS Pedestal jaw liner size 03 x 38 x 67 mm as per FIG. 33 of RDSO CASNUB Bogie manual no. G.95 [Rev. 1] Amendment no. 5 of Jun - 2003 rev-2Material and specification as per Fig. 33
Secondary Spring (Inner) for LHB Non-AC Coaches to RCF Drg. No. LG05100, Alt. c and conforming to RDSO Specification No. RDSO/2017/CG-01, Rev. 03 of January 2025 along with RDSO Letter No. SV. FIAT. Spring Dated 11-06-2019. Spring Code No. F08.
Bush for bogie brake gear of casnub bogies to RDSO Drg. No. SK-69597, Alt-43, Item-7