Central Railway Tender Results

AMLODIPINE 5 MG TABLET

SET OF RUBBER COMPONENT

Purge Valve Assembly for FTRTIL MAKE AIR DRYER as per FTRTIPL Part no. 029100700.

ASS.PCB ALT-174 WHITE

Kit for HP Piston (Dia.140mm)

SET OF WIPER ARM ASSEMBLY COMPLETE [LH and RH- 02 NOS. EACH] AS PER CLW SPECN. NO. CLW/MS/3/050 ALT-5 and CLW DRG. NO. 1209.07-303.021 , ONE SET CONSISTS 02 ITEMS 04 NOS.

NUTS M.S. CASTLE DIA M36 TO IS: 2232/19 [NUTS M.S. CASTLE DIA M36 TO IS: 2232/1967 REAFFIRMED 2001 FIRST REVISION.]

SET OF SAFETY BRACKET AND STRAP FOR CO-CO BOGIE as per BSL/ELW/SK.NO.7011 ALT-4. COMPRISING OF 02 ITEMS 24 NOS./Set

HEX. HEAD SCREW IS:1364/2002 (Pt-2)ISO-4017 M16X 90MM. P.C.-8.8 ZINC PLATED. FROM RDSO/CLW APPROVED SOURCES ONLY. MANUFACTURER'S NAME AND PROPERTY CLASS MUST BE EMBOSSED / INDICATED ON HARDWARES. NOTE TO FIRM:- THIS ITEM IS RESERVE ONLY FOR CLW APPROVED SOURCES.

Supply, Testing and Commissioning of 03 Nos. of Online UPS As per Annexure "A" with on site OEM Warranty for 3 year or more from date of supply or commissioning whichever is later.

Growler tester suitable for 6FRA6068 thr [Growler tester suitable for 6FRA6068 three phase Rotor, Dual magnetization yoke as per specification Annexure A attached with standard accessories (1) Thermacol molded carry case- 01 No. (2) ASTM test block- 01No. (3) Pie gauge- 01 No. (4) Puffer bulb - 01 No. (5) Dry magnetic powder water base- 01 kg. Make- SIMS, MACC Enterprise, Arati Electric company, Prime machine tools center.]

Rubber Gasket as per CLW Spec No. CLWES/ [Rubber Gasket as per CLW Spec No. CLWES/3/0151 ALT-H to Drg.No. FIG No. 3 &,4. ( sheet. no .8 )]

LOCKING PLATE FOR HITACHI GEAR CASE AS P [LOCKING PLATE FOR HITACHI GEAR CASE AS PER CLW DRAWING NO. 05/4/13/200]

Air Brake System Air Dryer (Spare Parts) [Air Brake System Air Dryer (Spare Parts) PCB 110V For Electric Loco to Prag Polymers Part No. 4204190.]

ACTUATOR,ETR FUEL CONTROL

EBC/5 BLENDING UNIT

1)Dial Snap gauge Range 75-100 mm LC 0.001 [Dial Snap gauge Range 75-100 mm LC 0.001mm with a Digital dial indicator and standard ring of outside measurement. proper casing along with NABL calibration certificate. Material to be procured from OEM or authorized dealer/stockist/agent of the principal manufacture with current and valid Authorization letter or firm should provide proof of the purchase to ensure genuineness of the material. 2)Dial Snap gauge Range 100-125 mm, LC 0.0 [Dial Snap gauge Range 100-125 mm, LC 0.001mm with a Digital dial indicator and standard ring of outside measurement. Proper casing along with NABL calibration certificate. Material to be procured from OEM or authorized dealer/stockist/agent of the principal manufacture with current and valid Authorization letter or firm should provide proof of the purchase to ensure genuineness of the material. 3) Dial Snap gauge Range 125-150mm, LC 0.00 [Dial Snap gauge Range 125-150mm, LC 0.001mm with a Digital dial indicator and standard ring of outside measurement. Proper casing along with NABL calibration certificate. Material to be procured from OEM or authorized dealer/stockist/agent of the principal manufacture with current and valid Authorization letter or firm should provide proof of the purchase to ensure genuineness of the material] 4) Dial Snap gauge Range 175-200 mm, LC 0.0 [Dial Snap gauge Range 175-200 mm, LC 0.001mm with a Digital dial indicator and standard ring of outside measurement. Proper casing along with NABL calibration certificate. Material to be procured from OEM or authorized dealer/stockist/agent of the principal manufacture with current and valid Authorization letter or firm should provide proof of the purchase to ensure genuineness of the material

SET OF T SOCKET SPANNER

Resistance 4.7 Ohm,1000 watt as per drawing no. MEI/W-WRES/26122017-12 with inverted clamp height of 100 mm and suitable for fixing in existing panel

160 sq.mm. Annealed Copper Stranded Jumper Wires Spec: TI/SPC/OHE/JMP/0941, STR: CORE-STR-04 A or latest.

SHACKLE LOCK AND LOCK PIN for centre pivot pin TO RDSOS DRG NO. WD-85079- S/2, ITEM NO. 7 & 8, ALT.NO. 26 (TWENTY six) OR LATEST.

SUPPLY of Diesel Exhaust Fluid (DEF) AUS [SUPPLY of Diesel Exhaust Fluid (DEF) AUS 32 As Per ISO 22241-1 LHB Power car with CPCB-IV 500 kVA Cummins Make DG sets i .e. Cummins part no. AX1014552 confirming to EL/0.6.2/PC Main dt-03/02/2025 as RDSO approved letter attached here . MAKE :-INDI LUBE ,Valvoline, Fleet guard, TATA or similar.]

All steel hammer 500 Grams

Digital Multifunction Tester Supply of Digital Multifunction

SET OF FERRULES FOR BRAKE ASSLY.FOR WAP1 [SET OF FERRULES FOR BRAKE ASSLY.FOR WAP1 LOCO BOGIE AS PER SKETCH NO. ELW.BSL.SK.7028 ALT.3 COMPRISING OF 05 ITEMS = 72 NOS.]

Supply and installation of hydraulic puller for replacement of Aclathan ring/Elastic ring of WAG-9 locomotive as per specification attached in Annexure.

Gasket Fuel Pump support.

MODIFIED LOUVER ASSLY FOR CAB WINDOWS (WAM-4,WAG-5 TYPE LOCOS) AS PER DRG. NO: ELW/BSL/2/F-79.120

Set of Cable Wire Zipper Red Colour (Halogen free & Fire retardant), 1) Size- 40 mm X 50 Mtrs (40 Nos) and 2) Size- 20 mm X 50 Mtrs (20 Nos). Make: NOVEAU SAFE-T 1ST or Cabmantools or Ziptronz or equivalent.

Lavatory window with Fixed Louvers and sealed Glass unit for LHB Coaches as per RCF Drg. No. LW54188 alt - a and follow RCF/KXH Design office L No. MD35131 dated 26.12.2022. To be procured from RCF approved sources only. RCF Item ID: 2400001

S.S. Middle berth stopper LH & RH to MTN MISC. SK. No. 3663, Alt-5. Material and specification as per drawing. Sr. No. 7 & 8 to be supplied as per IS 6603/01 x 04 crni 19 grade.

Supply of Epoxy Gel Coat with Hardner and Thinner. One set consists of (1) Epoxy Gel- 3Kgs., (2) Epoxy HardnerEH-411-1Kgs. and (3) Epoxy Thinner 221-0.9Kgs. Make-Tuff Bond or Pidilite or Elitecrete or Stanvac or ROTO Polymer or similar make same as above.

LED based Driver and assistant desk illumination lamp

Suspension spring as per Drawing. No. CI/WAA-1/M, required for POH of NDM1 NG Loco.

Set of spares for overhauling of CGL Make Traction Motor Model No. 2141-C TM as per Annexure. (Material to be procure from OEM or authorized dealer / distributor of OEM)

POH KIT OF ANEST IWATA MAKE LUBRICATED C [POH KIT OF ANEST IWATA MAKE LUBRICATED COMPRESSOR MODEL-RR1000 AS PER PART No. SSPK1515. ONE SET CONSISTS OF 29 ITEMS AS PER ANNEXURE ATTACHED]

Padding Cotton (Wadding)

BI-BAG FOR DIALYSIS - (2 BI BAGS - 650 GMS + 10 LTRS BICARBONATE FLUID) MAKE OF FRESENIUS

Set of Pillar (RH & LH) for Automobile Carrier Coaches With Side Entry As Per RDSO Drg. No. RDSO/CG/DRG/21010 Item No. 7 & 8. One Set consist of One No. RH & One No. LH Pillar. Item to be supplied with Red Oxide Zinc Chromate Primer Coating.

STRIKER CASTING (BG) with wear plate confirming to RDSOSTR.NO.WD-70-BD-10 [REV.4], TO RDSO DRG.NO.WA/BD-4460, ALT.9. (UVAM RDSO Item ID: 3100446 , Upgraded High Tensile Centre Buffer Coupler for for freight stock wagons, Sub Item ID: 3100446007, Striker Casting (B.G.) with wear plate)

CARTR FAST ACTING INSULINE ASPART 100 IU/ML 3ML.

ELECTRICAL SAFETY SHOEs

INJ INSULIN LISPRO 25% + INSULIN LISPRO PROTAMIN 75% SUSPENSION (HUMALOG MIX 25)

INJ FOLIC ACID 15MG + B12 500MCG + NICOTINAMIDE 200MG + BENZYL ALC. 2.

INJ HEPARIN SOD 25000 IU/5ML.

TAB DIAZEPAM 5 MG.

Digital speedometer and pulse generator set of 110V DC wall mounted with measuring range of 0.0 to 199.9KM/hr along with test and calibration certificate. One set consist Digital Speedometer 1 No., Pulse Generator (PG) 01 No., Connector cable 1.5Mtr, 4 core 0.5 Sq mm wire 12 Mtr, Junction box with connector 1 No, User Manual.1 No. Make /Brand : SONATA, B-MAC, MEDHA SERVO DRIVES, LAXVEN, AUTOMETER. Material to be procured from OEM or authorized dealers only. (One sample may be shown to consignee for confirmation of fitment before supply.)

11505 - IV HUMAN SERUM ALBUMIN 20% 100 ML

65813 -TAB ENTERIC COATED ACETYL SALICYLIC ACID 150 MG

10019 - SODA LIME 5 KG JAR