Central Universities Ministry of Human Resource Development Tender Results

DSLR/COMPACT/HANDHELD CAMCORDER or VIDEO CAMERAS Average Turn Over of Last 3 Years 3 Lakh (s) Experience with Gov. Required 3 Year (s) DSLR/COMPACT/HANDHELD CAMCORDER Or VIDEO CAMERAS ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values TYPE Classification of Camera Still Still, Video Type of Camera DSLR APS Format DSLR APS Format, DSLR Full Frame Format, Compact Digital camera, Handheld camcorders or Video Cameras IMAGE SENSOR Image Sensor CMOS CCD, CMOS Sensor Size for Fixed Lens Camera (inch) NA * Sensor Size for Interchangeable Lens Camera (mmxmm) 22.3 x 14.9 17.3 x 13.0, 22.3 x 14.9, 22.5 x 15, 23.5 x 15.6 to 15.7, 35.6 to 35.9 x 23.8 to 24, 36 x 23.9 to 24, NA 1/5 Effective Pixels (Mega Pixels) 24 * ISO (Sensitivity of the image Sensor) Max 25600 800, 1600, 3200, 6400, 12800, 25600, 32000, 40000, 51200 (or higher) Supported Picture or image format JPEG, RAW * OPTICS Lens Mounting Detachable Fixed, Detachable Mount type EF * Type of Lens Zoom Lens * Minimum Focal Length 18 Any applicable numeric value Maximum Focal Length 135 Any applicable numeric value Minimum Lens Aperture (f/number) 3.5 Any applicable numeric value Maximum Lens Aperture (f/number) 5.6 Any applicable numeric value Optical Zoom 3X to 5X * Digital Zoom (X) 0 * Maximum Field of View 150 * Focus Mode Auto, Manual * Video Recording Video Recoding true true, false Maximum Recording Resolution (Pixels) Full HD (1920 x 1080) 4K (3840 x 2160), Full HD (1920 x 1080), HD (1280 x 720), SD (640 x 480), NA Frame Rate 60, 25, 24, 30 * Video Compression Format H.264 * Live Video Streaming false true, false Video Output Port Mini HDMI * Video file format MP4 * AUDIO Audio Recording true true, false Audio Recording Type Buit-in, External * Number of Audio Input Port 1 * Type of Audio input Port 3.5 mm (Stero mini jack) * Audio Output No Yes, No Number of Audio 1 * 2/5 Output Port Type of Audio output Port 3.5 mm (Stero mini jack) * DISPLAY Display true true, false Display Type LCD * Touch Screen No Yes, No Display Size (inch) 2.6 - 3 1-1.5, 1.6-2, 2.1 - 2.5, 2.6 - 3, 3.1 - 3.5, 3.6 and above, NA Vari Angle Screen Yes Yes, No View Finder Yes Yes, No FEATURES Flash Built-in, External (Not inclusive in the scope of supply) Built-in, External (Not inclusive in the scope of supply), NA GPS coordinates Stamping onto Videos photographs No * Gyro Sensor No * Voice Control No * Connectivity Interface Wi- Fi, Bluetooth, NFC, USB * Control NA * Supported Operating Systems for App NA * Picture control system Auto, standard, portrait, monochrome, landscap e * Noise reduction Feature No * Flash modes Auto, Flash fill, Slow Synchro, Advanced Sync, Flash Off * Shutter type electronically controlled * Minimum Shutter Speed 30 * Maximum Shutter Speed 0.00025 * Drive modes Countinous Shooting * STORAGE Storage Type SD * Dual Slot No * SD Card Memory inclusive in the scope of supply (GB) 16 * 3/5 Memory Card expandable upto (GB) 128 * In-built Memory(GB) 0 * BATTERY Power Source Rechargeable Battery * Battery Size, if Non Rechargeable Battery NA * Battery Chemistry, if Rechargeable Battery Li-Ion * Number of Batteries required for operation 1 * Number of Batteries supplied (Inclusive in the Scope of Supply) 1 * BATTERY CAPACITY (mAh) 1000 * Battery Charger for Rechargeable Batteries Yes * OPERATING CONDITIONS Minimum Operating Temperature (for land use) 0 0, 5, 10, 15, 20, 30, 40 Maximum Operating Temperature (for land use) 40 40, 50, 55, 60, 70 Operating Humidity, Rh at 40 deg C 85 65, 70, 75, 80, 85, 90, 95 GENERIC Housing construction Composite polycarbonate outer shell with metallic internal chassis Metallic, Polycarbonate, Composite polycarbonate outer shell with metallic internal chassis IP Protection NA IP 21, IP 22, IP 23, IP 52, IP 53, IP 54, IP 55, IP 66, IP 67, NA Carry Case inclusive Yes Yes, No Weight 0.54 * Dimension (WxHxD) (mmxmmxmm) 131.0 x 99.9 x 76.2 * List of Items and Quantity of each item included in the offer Memory Card - 1, Bag - 1, Charger - 1, Battery - 1 * WARRANTY Warranty 2 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/5 1 Chanchal Kumari Batra 110021, RAM LAL ANAND COLLEGE, BENITO JUAREZ ROAD, OPPOSITE ANAND NIKETAN, NEW DELHI-110021 1 15

computer workstation Average Turn Over of Last 3 Years 7 Lakh (s) Computer Workstation ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values TYPE Form Factor Desktop Mobile, Desktop, AIO PROCESSOR Processor Make Intel Intel, AMD Number of Processors 1 1, 2 (or higher) Processor Generation 7th * Processor Configuration Intel Core i7-7700 (4 Core, 3.6 GHz, 8 MB L3 Cache, 65 Watt) Intel Core i7-7700 (4 Core, 65 Watt) CHIPSET Chipset Intel C236 * Number of PCI Slots 2 * Number of PCIe Slots Gen 3 (x 1, x 4, x 8, X16) (Number) 2 * NumbAer of PCIe Slots Gen 3 (x 16) 2 * GRAPHICS Type of Graphics Discrete Discrete 1/4 Graphic Card nVIDIA Quadro P2000 5GB nVIDIA Quadro P2000 5GB MEMORY RAM DDR4 DDR4 Operating Frequency 2400 * RAM Type Non ECC * RAM Size (GB) 32 4-3000 RAM Expandibilty (GB) 128 32-3000 STORAGE Type of Hard Disk Drive - I SATA Any applicable text(s) Size of Hard Disk Drive - I (GB) 2000 Any applicable text(s) No of Hard Disk Drives-I 1 1, 2, 3, 0 (or higher) Type of Hard Disk Drive - II SSD Any applicable text(s) Size of Hard Disk Drive - II (GB) 240 Any applicable text(s) No of Hard Disk Drive -II 1 1, 0 (or higher) OPERATING SYSTEM Operating System WINDOWS 10 PRO * OS Certifications YES * APPLICATION & CERTIFICATIONS Safety Certifications YES * ROHS Compliance Yes * TCO Compliance (for Monitors) TCO-07 * Applications N/A * Applications Certification from OEM manufacturing Workstation N/A * BIS Registration Yes * BIS Registration Number under CRS of Meity - * CONNECTIVITY Networking Interface Single Gigabit NIC 10/100/1000 * Wi-Fi Connectivity NA * PORTS VGA Port 0 * HDMI Port 0 * Display Port 1 * Mini Display Port 4 * 2/4 USB C with Thunderbolt Not-Available * Number of USB 2 Ports 2 * No. of USB 3.0 Port (No.) 4 * DISPLAY Display (antiglare, LED-backlit) Monitor Integrated, Monitor Display Type Non- Touch Touch, Non- Touch Display Size (cm) 54.61 35-82 Panel Type IPS * Display Resolution (Full HD or better) (Pixel) 1080 Any applicable text(s) POWER Maximum Power (Watt) 230 * Power Efficiency Minimum 80% * Power Management Unit - * OTHERS Keyboard Standard Keyboard * Mouse Optical Scroll Mouse * Optical Drive N/A * No. of DIMM Slots (No.) 4 * No. of Internal Bays (No.) 1 * No. of External Bays (No.) 1 * Security N/A * Availability of Bundled Softwares N/A * On Site OEM Warranty (Year) 3 1, 5 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajinder Jaswal 110089, Shaheed Sukhdev College of Business Studies Dr. K.N. Katju Marg, PSP Area IV, Sector 16, Rohini, Delhi - 89 1 15

Notebook Computers-laptop

Notebook Computers-laptop

Notebook Computers-laptop

transilluminators uv Transilluminators Uv ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped UV Wavelength (nm) (nm) 312 - Type of illuminator Benchtop Type Benchtop Type, Hand held Intensity control - High/Medium/Low Yes - Cooling system by fan air cooling - Warranty (years) 3 - Size of Filter screen(Length xWidth) in mmxmm 200x200mm - List of accessories to be supplied NA - Dimensions of Equipment(LxWxH), 417X417X127 - Selection of Intensity Single Intensity Single Intensity, Variable Intensity Weight of equipment, kg (kg) 3 - UV safety screen Yes - No. of UV Tubes (Nos) 6 - Application Range To view DNA/RNA - 1/2 migration on the the agarose gel in microbiology laboratory Wavelength type Dual Single, Dual, Multiple UV Tube wattage (W) 8 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jatinder Pal Singh Khipal 151001, Central University of Punjab, City Campus, Mansa Road, Bathinda - 151001 1 15

Notebook Computers-laptop

Fogging Machine

Steel tables Average Turn Over of Last 3 Years 95 Lakh (s) Experience with Gov. Required 3 Year (s) Steel Tables ( 225 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS: 8126 Latest false * Storage one side one side, both side Total Number of Storage Units triple storage single storage, double storage, triple storage, four storage, five storage, six storage Cup Board/Locker type Storage Units three * Type of Storage Units OTHER DESIGNS * Lock on all storage units Provided * Loading capacity of table top in KG ( ±5 Kg) 500 kg * Table Top Material 18 mm thick 20 mm thick MDF 1/4 and Thickness (±2 mm) prelaminated Particle Board (Not as per IS 8126) Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side, 18 mm thick prelaminated Particle Board (Not as per IS 8126), 20 mm multiplex board, 40 mm multiplex board, 50 mm multiplex board, 25 mm thick MDF Board. Padestal (Under structure) Mild steel rectangular section of out side minimum 30 mm X 20 mm & Wall thickness minimum 1.2 mm Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum (Not as per IS 8126), Mild steel rectangular section of out side minimum 30 mm X 20 mm & Wall thickness minimum 1.2 mm Table Top Length ±10(mm) 1190 900, 1000, 1190, 1300, 1360, 1500, 1660, 1800, 2000, 750 Table Top Width ±10(mm) 600 470, 600, 690, 750, 800, 900, 705, 450 Table Height ±5(mm) 750 710, 735, 760, 840, 850, 860, 750 MATERIAL Foot Rest Material mild steel rectangular section of size 30 mm X 20 mm and wall thickness minimum 1.6 mm * Handles Material Plastic (Not as per IS 8126) * Thickness of PVC tape on edges of Table Top banded with the help of hot melt glue (mm) 2.0 mm * 2/4 Storage Unit and Drawer Units Material 0.6 mm M S Sheet (Not as per IS 8126) 0.6 mm M S Sheet (Not as per IS 8126), 0.7 mm M S sheet, 0.8 mm M S sheet, 0.9 mm m s sheet, 1.0 mm m s sheet, 1.1 mm m s sheet, 1.2 mm m s sheet, 0.5 mm m s sheet Shoes Material nylon * DIMENSION Width of Storage Unit ±5(mm) 450 * Depth of Storage Unit ±10(mm) 600 355, 650, 700, 725, 575 Overall Height of Storage Units ±10 mm 560 mm * Height of smallest Storage Compartment Drawer ±3 mm 125 mm * Height of medium size Storage Compartment Drawer ±5 mm 175 mm * Height of Largest Storage Compartment Drawer ±5 mm 255 mm * Width of Locker Cupboard type Storage unit 450 mm 450 mm, 500 mm, 560 mm, N.A, 350 mm Depth of Locker Cupboard type Storage unit 600 mm 600 mm, 650 mm, 700 mm, 725 mm, N.A Height of Locker Cupboard type Storage unit 280 mm * MISC Foot Rest Provided YES * COLOUR & FINISH Colour of Lamination teak colour * Paint Powder coated * Colour of Paint brown * CERTIFICATION ISI Marked false true, false Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered YES YES, NO 3/4 product is ISO 14001:2015 certified OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nivin Sebastian 671316, CENTRAL UNIVERSITY OF KERALA, TEJASWINI HILLS, PERIYA CAMPUS, KASARAGOD DISTRICT, KERALA 225 15

plastic moulded chair Average Turn Over of Last 3 Years 6 Lakh (s) Experience with Gov. Required 3 Year (s) Plastic Moulded Chair ( 300 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR SINGLE PIECE PLASTIC MOULDED SINGLE PIECE PLASTIC MOULDED, PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE, SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE Seat cushion Without With, Without Back Cushion Without With, Without Conformity to Indian Standard IS 13713- Latest false * Plastic Material POLYPROPELENE FILLED THERMOPLASTIC, UNFILLED THERMOPLASTIC, 1/4 FILLED THERMOSETTING PLASTIC, UNFILLED THERMOSETTING PLASTIC, POLYPROPELENE, PVC (Polyvinyl Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) ARMS Without arms With arms, Without arms DIMENSION & WEIGHT Seat Width in mm (+/- 5 mm) 425 * Seat Depth in mm (+/- 5 mm) 560 * Chair Height in mm (+/- 10 mm) 870 * Chair Dimensions Conforming To IS 3663 (Latest) * Weight of Chair (IN Grams) 210 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) No Cushion 40, 45, 50, 55, 60, 65, 70, 75, No Cushion Density of PU Foam in KG per CuM No Cushion 40, No Cushion Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) No cushion 40, No cushion PERFORMANCE Stability of the Chair Conforming To IS 5416 (Part 2) * Strength of the Chair Conforming To IS 5416 (Part 1) * Maximum Ash Content is Not more than 1% in Conformity test as per Annex D of IS: 14887 (Latest) Complied that Ash content is less than 1% * UV Resistance Test - % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table 1- Cycle Number 2 is more than 50 % Complied Minimum 50% tensile strength retained after exposure as per test * Support/Under Support/Under Sigle Moulded Piece No SS 202 STRUCTURE, 2/4 Structure Structure Support Structure SS 304 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Sigle Moulded Piece No Support Structure Support Structure Finishing Sigle Moulded Piece No Support Structure Stove enameled Paint, Powder coated, chrome, epoxy polyester, synthetic enamel, Natural Steel Finish, Sigle Moulded Piece No Support Structure CERTIFICATION Test reports to be furnished to buyer on demand YES * MISC Colour Dark Brown * WARANTEE PERIOD WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nivin Sebastian 671316, CENTRAL UNIVERSITY OF KERALA, TEJASWINI HILLS, PERIYA CAMPUS, KASARAGOD DISTRICT, KERALA 300 15

Multimedia Projectors

Steel tables Average Turn Over of Last 3 Years 8 Lakh (s) Experience with Gov. Required 1 Year (s) Steel Tables ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS: 8126 Latest false - Storage both side one side, both side Total Number of Storage Units five storage single storage, double storage, triple storage, four storage, five storage, six storage Cup Board/Locker type Storage Units one - Type of Storage Units Fig 1A of IS 8126 - Lock on all storage units Provided - Loading capacity of table top in KG ( ±5 Kg) 700 kg - Table Top Material and Thickness (±2 mm) 18 mm thick prelaminated Particle Board (Not as per IS 8126) 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick 1/4 on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side, 18 mm thick prelaminated Particle Board (Not as per IS 8126), 20 mm multiplex board, 40 mm multiplex board, 50 mm multiplex board Padestal (Under structure) Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum (Not as per IS 8126), Mild steel rectangular section of out side minimum 30 mm X 20 mm & Wall thickness minimum 1.2 mm Table Top Length ±10(mm) 1660 900, 1000, 1190, 1300, 1 360, 1500, 1660, 1800, 2 000 Table Top Width ±10(mm) 900 470, 600, 690, 750, 800, 9 00, 705 Table Height ±5(mm) 735 710, 735, 760, 840, 8 50, 860, 750 MATERIAL Foot Rest Material N.A - Handles Material Plastic (Not as per IS 8126) - Thickness of PVC tape on edges of Table Top banded with the help of hot melt glue (mm) 2.0 mm - Storage Unit and Drawer Units Material 0.6 mm M S Sheet (Not as per IS 8126) 0.6 mm M S Sheet (Not as per IS 8126), 0.7 mm M S sheet, 0.8 mm M S sheet, 0.9 mm m s sheet, 1.0 mm m s sheet, 1.1 mm m s sheet, 1.2 mm m s sheet, 0.5 mm m s sheet Shoes Material nylon - 2/4 DIMENSION Width of Storage Unit ±5(mm) 450 - Depth of Storage Unit ±10(mm) 600 355, 650, 700, 725, 5 75 Overall Height of Storage Units ±10 mm 560 mm - Height of smallest Storage Compartment Drawer ±3 mm 175 mm - Height of medium size Storage Compartment Drawer ±5 mm SAME AS SMALLEST - Height of Largest Storage Compartment Drawer ±5 mm SAME AS MEDIUM - Width of Locker Cupboard type Storage unit 450 mm 450 mm, 500 mm, 560 mm, N.A, 350 mm Depth of Locker Cupboard type Storage unit 600 mm 600 mm, 650 mm, 700 mm, 725 mm, N.A Height of Locker Cupboard type Storage unit 380 mm - MISC Foot Rest Provided NO - COLOUR & FINISH Colour of Lamination AS PER BUYER CHOICE - Paint Powder coated - Colour of Paint AS PER BUYER CHOICE - CERTIFICATION ISI Marked false Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification NO YES, NO WARANTEE WARANTEE PERIOD IN NUMBER OF 1 1, 2, 3, 4, 5 3/4 YEARS * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Subhash KB 671316, TEJASWINI PERIYA 10 15

revolving chair Average Turn Over of Last 3 Years 5 Lakh (s) Experience with Gov. Required 1 Year (s) Revolving Chair ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support Backrest With Adjustable Lumber Support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type height adjustable push back, height 1/5 adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame - backrest has separate adjustable headrest false Seat type fixed fixed, sliding Seat is curved false - Locking mechanism true - Type of locking N.A - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels 2/5 Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 40 - Material of Fabric Back Cover N.A mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover N.A foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A 3/5 GSM/Thickness of fabric ±5%(Gram/Square meter) N.A - DIMENSION Overall Chair Height ±15mm 990 As per GeM Catalogue. Backrest Height ±15mm 730 As per GeM Catalogue. Backrest Width ±10mm 480 410, 440, 480, 500, 520, 5 50, 650, 680, 700, 720 Seat Height ±15 mm 420 420, 450, 520 Seat Width ±10 mm 480 440, 550, 4 60 Seat Depth ±10 mm 440 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 0.5 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 650 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) N.A As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO 4/5 OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Subhash KB 671316, TEJASWINI PERIYA 10 15

classroom chairs Average Turn Over of Last 3 Years 16 Lakh (s) Experience with Gov. Required 1 Year (s) Classroom Chairs ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Chair Type Foldable Writing pad on One side and Arm on other side Without Arms, One Arm with fixed Writing pad on one side other side open, Fixed writing pad on one side and Arm on other side, Foldable Writing pad on One side and Arm on other side, Foldabe Writing Pad on One side with other side open Type of Seat and Backrest Made of Polythene cane As per GeM Catalogue. Depth of Seat in mm (+/- 10 mm) 440 - Height of Seat in mm (+/- 10 mm) 440 - Width of Seat in mm (+/- 10 mm) 480 - Overall Chair Height in mm (+/- 10 mm) 800 - SEAT DETAILS Thickness of Cushion 45 - 1/4 Used in Seat in mm (+/- 2 mm) Density of Cushion Used in Seat (Kg/Cubic Metre) 45 - Material of Fabric of Seat Cover 290 GSM cloth fabric - BACKREST DETAILS Density of Cusion Used in Backrest (Kg/Cubic Metre) 45 - Thickness of Cushion in Backrest in mm (+/- 2 mm) 45 - Material of Fabric of Backrest Cover 290 gSM Cloth Fabric - Width of Backrest (mm) 490 - Height of Backrest (mm) 470 - SUPPORT/UNDER STRUCTURE Frame Material 19mm thick Decorative Block Board BWP grade Conforming to IS 1659 As per GeM Catalogue. Under Storage provided below the Seat YES - Material of under storage The paper tray is made of 0.2cm. dia. M.S. wire spot welded to form a mesh. It is black powder coated. - Length of Under Storage (mm) 350 - Width of Under Storage (mm) 345 - DEPTH of Under Storage (mm) 75 - WRITING PAD DETAILS Writing Pad Material 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side - Writing Pad Size (Length X Width in mm) 540 X 290 - MISC Colour of Fabric for Blue - 2/4 Seat and Backrest Finishing of Structure Powder coated - WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand YES - Product having BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Subhash KB 671316, TEJASWINI PERIYA 50 15

Computer Table

revolving chair Average Turn Over of Last 3 Years 4 Lakh (s) Experience with Gov. Required 3 Year (s) Revolving Chair ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type push back As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type push back push back, height 1/5 adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame - backrest has separate adjustable headrest false Seat type fixed fixed, sliding Seat is curved false - Locking mechanism true - Type of locking upright locking - Number of arm movement 2(up & down) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels 2/5 Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Proypylene steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU foam covered with mesh fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 55 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 50 - Material of Fabric Back Cover mesh fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover Mesh Fabrics foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A 3/5 GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram - DIMENSION Overall Chair Height ±15mm 890 As per GeM Catalogue. Backrest Height ±15mm 500 As per GeM Catalogue. Backrest Width ±10mm 440 As per GeM Catalogue. Seat Height ±15 mm 420 420, 450, 480, 500, 520 Seat Width ±10 mm 550 440, 520, 550, 4 60, 360 Seat Depth ±10 mm 520 400, 460, 5 50, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.7 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 15 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 650 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) N.A As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO 4/5 OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bipul Kumar 824236, Central University of South Bihar, SH-7, Gaya Tekari Road, Dariya Pur, Panchanpur. Gaya. 30 15

Steel tables Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 3 Year (s) Steel Tables ( 40 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS: 8126 Latest true - Storage both side one side, both side Total Number of Storage Units five storage single storage, double storage, triple storage, four storage, five storage, six storage Cup Board/Locker type Storage Units two - Type of Storage Units OTHER DESIGNS - Lock on all storage units Provided - Loading capacity of table top in KG ( ±5 Kg) 100 KG - Table Top Material and Thickness (±2 mm) 18 mm thick prelaminated Particle Board (Not as per IS 8126) 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick 1/4 on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side, 18 mm thick prelaminated Particle Board (Not as per IS 8126), 20 mm multiplex board, 40 mm multiplex board, 50 mm multiplex board, 25 mm thick MDF Board. Padestal (Under structure) Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum (Not as per IS 8126) Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum (Not as per IS 8126), Mild steel rectangular section of out side minimum 30 mm X 20 mm & Wall thickness minimum 1.2 mm Table Top Length ±10(mm) 1360 900, 1000, 1190, 1300, 1 360, 1500, 1660, 1800, 2 000, 750 Table Top Width ±10(mm) 690 470, 600, 690, 750, 800, 9 00, 705, 450 Table Height ±5(mm) 735 710, 735, 760, 840, 8 50, 860, 750 MATERIAL Foot Rest Material Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum (Not as per IS 8126) - Handles Material Plastic (Not as per IS 8126) - Thickness of PVC tape on edges of Table Top banded with the help of hot melt glue (mm) 2.5 mm - Storage Unit and Drawer Units Material 0.6 mm M S Sheet (Not as per IS 8126) 0.6 mm M S Sheet (Not as per IS 8126), 0.7 mm M S sheet, 0.8 mm M S sheet, 0.9 mm m s sheet, 1.0 mm m s sheet, 1.1 mm m s 2/4 sheet, 1.2 mm m s sheet, 0.5 mm m s sheet Shoes Material nylon - DIMENSION Width of Storage Unit ±5(mm) 355 - Depth of Storage Unit ±10(mm) 575 355, 650, 700, 725, 5 75 Overall Height of Storage Units ±10 mm 560 mm - Height of smallest Storage Compartment Drawer ±3 mm 165 mm - Height of medium size Storage Compartment Drawer ±5 mm SAME AS SMALLEST - Height of Largest Storage Compartment Drawer ±5 mm 305 mm - Width of Locker Cupboard type Storage unit 350 mm 450 mm, 500 mm, 560 mm, N.A, 350 mm Depth of Locker Cupboard type Storage unit N.A 600 mm, 650 mm, 700 mm, 725 mm, N.A Height of Locker Cupboard type Storage unit N.A - MISC Foot Rest Provided YES - COLOUR & FINISH Colour of Lamination grey - Paint Powder coated - Colour of Paint gray - CERTIFICATION ISI Marked false Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO 3/4 Green guard certification NO YES, NO WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bipul Kumar 824236, Central University of South Bihar, SH-7, Gaya Tekari Road, Dariya Pur, Panchanpur. Gaya. 40 15

Firewall

Multimedia Projectors

Notebook Computers-laptop

revolving chair Experience with Gov. Required 5 Year (s) Revolving Chair ( 10 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type knee tilt synchronic * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 90 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Adjustable Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * Ergonomic Seat true true, false 1/5 Design Back type height adjustable push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking 4-Position Locking * Number of arm movement 4(up & down end left & right) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Chrome finish with 5 wheels Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium 2/5 Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material pressed and moulded plywood with polypropylene cover pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 * Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, 100% polyester fabric 3/5, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram * DIMENSION Overall Chair Height ±15mm 890 * Backrest Height ±15mm 520 * Backrest Width ±10mm 520 * Seat Height ±15 mm 520 420, 450, 480, 500, 520 Seat Width ±10 mm 520 440, 520, 550, 460, 360 Seat Depth ±10 mm 460 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.8 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 750 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 25 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 25 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered YES YES, NO 4/5 product is ISO 14001:2015 certified OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nivin Sebastian 671316, CENTRAL UNIVERSITY OF KERALA, TEJASWINI HILLS, PERIYA CAMPUS, KASARAGOD DISTRICT, KERALA 10 15

Desktops

Class Room Desking and Seating Average Turn Over of Last 3 Years 20 Lakh (s) Experience with Gov. Required 1 Year (s) Class Room Desking And Seating ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK ONLY TABLE DESK, ONLY SEATING, INTEGRATED DESK CUM SEATING, INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK, ONLY TABLE/DESK WITH SHELF/STORAGE UNDER DESK Desking Configuration TWO SEATER SINGLE SEATER, TWO SEATER, THREE SEATER, FOUR SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 1500 As per GeM Catalogue. DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 18 mm thick prelaminated Particle Board As per GeM Catalogue. Material of Support Mild Steel square As per GeM Catalogue. 1/4 Structure or Side Pannel Section of size 25x25 mm and wall thickness minimum 1.6 mm Height of Desk Top in mm (±5 mm) 750 As per GeM Catalogue. Width of Desk Top in mm (± 5 mm) 380 As per GeM Catalogue. SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) 18 mm thick prelaminated Particle Board 12 mm Thick Plywood Only, 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side, 18 mm thick prelaminated Particle Board, 25 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, 19mm thick Commercial Block Board BWP grade Conforming to IS 1659, 19mm thick Decorative Block Board BWP grade Conforming to IS 1659, 19mm thick Commercial Block Board MR Grade Conforming to IS 1659, 19mm thick Decorative Block Board MR Grade Conforming to IS 1659, 25mm thick prelaminated plywood having 0.8 mm (± 0.2mm) thick prelaminated sheet, ONLY DESK NO SEATING Material of Support Structure Mild Steel square Section of size 25x25 As per GeM Catalogue. 2/4 mm and wall thickness minimum 1.6 mm Material of Seat Cushion WITHOUT CUSHION 40 mm thick PU foam of density 40 gram per cubic cm, WITHOUT CUSHION, ONLY DESK NO SEATING Width of Seating in mm (±10 mm) 340 As per GeM Catalogue. Height of Seat in mm (±10 mm) 440 As per GeM Catalogue. Width of backrest if provided in mm (± 5 mm) 270 As per GeM Catalogue. Back Support for Seating of Same materail as Seating Provided without cushion Provided with Cushion, Provided without cushion, back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) NO - Colour of finish brown - Desk top finishing All sides Edge to be banded with PVC tape of 2 mm thick with help of hot melt glue - Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) NA - WARRANTY Warranty period in number of years 1 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Subhash KB 671316, TEJASWINI PERIYA 50 15

domestic refrigerators Domestic Refrigerators ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standrad IS:15750(2006) for Frost Free IS:1476 latest for Direct Cool, IS:15750(2006) for Frost Free ISI marked false - CML No. 0 - Capacity and Design features Storage Volume(NET CAPACITY) (Litres) 300 As per GeM Catalogue. Type of Door Single Single, Double Insulation Puff Puff, Polyurethane, Maxi 2, others Built in Voltage Stabilizer Yes - Method of Defrosting Frost Free Direct Cool, Frost Free Performance BEE Star Rating as on date 2 2, 3, 4, 5 Eco-friendly refrigerant yes - Compressor Power saver Compressor - Voltage Range at 43 degree Centigrade (Volts) 230 (tolerance 10%) - 1/2 Material Coil Material Copper (Cu) Copper (Cu), Aluminium (Al) Finish and Colour Type of Finish Metallic Metallic, Matt, Printed Design Colour Grey As per GeM Catalogue. * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jatinder Pal Singh Khipal 151001, Central University of Punjab, City Campus, Mansa Road, Bathinda - 151001 1 15

Printer or photo Copier Paper Printer Or Photo Copier Paper ( 4000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297 Size of the Paper A4 A4 GSM of Paper 75 75 Quantity Number of Sheets per Ream 500 500 Physical Characteristics Brightness in % 85 85, 85.225, 85.5, 85.6, 85 .6578, 85.85 Tensile Index MD in Nm/g 45 - Tensile Index CD in Nm/g 28 - Opacity in % 88 - Tear Index (Avg) in Nm.m²/g 5 - Smoothness for both 175 - 1/2 sides (Bendtsen) in ml/min Thickness in µm 98 - Moisture in % 5 - Stiffness MD 3 - Stiffness CD 1.5 - Surface Strength Dennison (Wax Pick) >= 12 A 12A - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Naresh Joshi 470003, Dr. HariSingh Gour Vishwavidyalaya, University campus Sagar M.P. 470003 4000 15

Televisions

computer kiosk Computer Kiosk ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Type Of Information Kiosk Processor Based Thin Client Based, Processor Based Type Of Enclosure Mild Steel Mild Steel, Stainless Steel Thickness of Enclosure (mm) 1.6 - Chassis Screwless - Mounting Floor mount - Configuration Processor Make Intel AMD, Intel Processor Configuration Dual Core or higher Dual Core or higher, Embedded Processor Speed (GHz) 2.3 Operating System (Pre-loaded) Window 10 Window 8.1, Window 10 Memory (GB) 4 Storage/HDD (GB) 500 Display Display Size (inches) 21 Display Type Color LED touch Screen Color LED touch Screen, Color LCD touch Screen 1/3 Touch Type Surface Acoustic Wave (SAW) Resistive, Capacitive, Surface Acoustic Wave (SAW) Antiglare & Overlay Tempered vandal resistant glass thickness (mm) 3 - Screen Resolution (pixels) 1920 x 1080 1280 x 1024, 1920 x 1080 Brightness (Nits) 250 - Ports USB Port 2, 0 2 - USB 3 or Higher 4 - VGA Port Yes - LAN Port Yes - Audio In and Out Yes - Options Standard Keyboard with USB Interface Not Available - Thermal Printer with 80 mm paper width and with Auto Cutter Not included - Certification BIS Registration under CRS of Meity for Data Processing Unit Yes - BIS Registration Number for Data Processing Unit R-41087220 - BIS Registration for Thermal Printer NA - BIS Registration Number for Thermal Printer NA - Safety Certification ( For CPU and Display) CE & FCC - Miscellaneous Speakers Yes - Weight (Kg) 59 - Optical Disk Drive External - Overall Dimensions (cm x cm x cm) 444x40 x65 + 5% - Maximum Power Consumption(In Watt) 120 - Operating Temperature Range(In Degree C) 45 - Operating Humidity(In %) 90 - On Site OEM 1 1, 2 2/3 Warranty (Year) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Chanchal Kumari Batra 110021, RAM LAL ANAND COLLEGE, BENITO JUAREZ ROAD, OPPOSITE ANAND NIKETAN, NEW DELHI-110021 1 15

Random Access Memory

smart card printer Average Turn Over of Last 3 Years 19 Lakh (s) Experience with Gov. Required 5 Year (s) Smart Card Printer ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Printing Type Re-Transfer (Dye Sublimation/Resin Thermal Transfer) Re-Transfer (Dye Sublimation/Resin Thermal Transfer), Direct to Card (DTC) Print colour Full colour Monochrome, Full colour Print Capability Dual Sided Printing (Auto) Single Sided Printing, Dual Sided Printing (Auto) Print Resolution (dpi) 300 Edge to Edge Print Speed (Single side) - Monochrome (cards per hour) 180 Edge to edge Print Speed (Single side) - Full colour (cards per hour) 124 Edge to Edge Print Speed (Dual side) - Monochrome (cards 95 1/6 per hour) Edge to edge Print Speed (Dual side) - Full colour (cards per hour) 65 Automatic Card feeding Yes - Compatible Card material (eg PVC, PET, Composite, Adhesive backed etc) ABS, Laminated PVC, PETG, proximity, smart and mag stripe cards, optical memory cards - Compatible Card Size (eg CR 80, CR 79, ISO 7810 format ID-1, ID-2 etc) CR-80 (3.370”L x 2.125”W/85.6mmL x 54mmW) - Compatible Card Thickness (minimum to Maximum) .030” (30 mil) to .050” (50 mil)/.762mm to 1.27mm - Card Input Hopper capacity 100 - Card Output hopper capacity (Nos) 200 - Communication interface capabilities USB + Ethernet - OS Compatibility Windows® 10/8.1/8 7/Vista®/XP/Server 2012/Server 2012 R2 Server 2008/Server 2008 R2/Server 2003, LINUX - Buffer Memory (RAM) (MB) 32 - Magnetic Stripe encoding option available Yes - Details of Magnetic encoder ( May specify "N/A" for printer without magnetic Stripe encoder) NA - Contact Smart Card encoding option available Yes - Details of Contact type Smart Card encoder (eg ISO 7816, EMV, K- cash, etc) ISO 7816, K-cash, etc - Contactless type Smart Card (internal & Yes - 2/6 external) encoding option available Details of Contactless type Smart Card (internal & external) encoder (eg ISO 14443, ISO 15693, Mifare, Desfire, iClass, etc) ISO 14443, Etc. - RFID encoding option available Yes - Details of RFID encoder (eg ISO 18000, etc) NA - Housing Material ABS - One Card cleaning Kit provided with main equipment Yes - One Pack of 100 blank cards provided with main equipment Yes - Type of Ribbon Cartridge Full Colour (YMCKO) - Yield of the Ribbon (Monochrome & Full Colour, as applicable) 500 (Single Side)/250 (Dual Side) - Overall Dimensions (LxWxH) (mm x mm x mm) 324 X 762 X 235 - Net Weight (Kg) 16.4 - Power supply 230 +/-10%, 50 Hz AC - Maximum Power consumption (Watt) 130 - Operating Temperature (degree C) 0 to 42 - Operating Humidity (%RH) 20 to 80 - Availability of Test Reports from Central Govt/NABL/ILAC accredited Lab showing conformity to the specifications Yes - If yes, Test Report Number - - If yes, Test Report Date - - If yes, Name of Test Lab - - If yes, Address of the - - 3/6 Test Lab Free installation and demonstration Yes - ON Site OEM Warranty (Years) 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bipul Kumar 824236, Central University of South Bihar, SH-7, Gaya Tekari Road, Dariya Pur, Panchanpur. Gaya. 1 15

Notebook Computers-laptop

Refrigerated micro-centrifuge Refrigerated Micro-centrifuge ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values SET 1 Microprocessor controlled High speed Micro centrifuge Yes - Maximum permissible Speed (RPM): - - Relative Centrifugal Force (RCF), Max: 20, 000 x g to 22, 000 x g - Temperature Range - 10 degree C to +40 degree C - Refrigeration System: Must be CFC free. - Display for Speed, RCF, Temperature and Time parameters: Yes - Type of Display: LCD display LCD display, LED display Facility for short run operation Yes - Imbalance System and Selectable acoustic Alarms Yes - Running Modes available: soft/fast accelerate, decelerate Yes - 1/3 and break off mode Operation of equipment: By simple knob(s) By simple knob(s), By keypad operations Angle rotor Polypropylene/metallic 24 x (15/10) ml or Dual row rotor with same capacity/volume Yes - Lid Aerosol tight Polysulfone or equiv. Lid - Certification: CE(European) US FDA, CE(European) Adopter for PCR tube sizes: 0.2 ml and 0.5 ml - Time Selection: 1 to 99 min or continuous - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jatinder Pal Singh Khipal 151001, Central University of Punjab, City Campus, Mansa Road, Bathinda - 151001 1 15 Required No ePBG Required No

Notebook Computers-laptop

Multifunction Machines

Steel Bookcases

almirah- Steel Average Turn Over of Last 3 Years 13 Lakh (s) Experience with Gov. Required 1 Year (s) Almirah- Steel ( 11 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest true - No of shelves (Nos) 4 - Type of Shelves Adjustable - Locker Provided true - Locking System with the locker YES - Cloth hanging provision in the Almirah true - Number of Doors (Nos) 2 - Door Stiffner upto full door height Provided with the almirah doors true - Number of Hinges with each door (Nos) 2 - Number of Glass Sheet fixed in each Almirah door (Nos) 6 - Construction Welded - 1/4 Lock Three Way bolting device controlled by lock - MATERIAL Material M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet, 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame, 3mm thick polycarbonate sheet fixed in the ms sheet frame, perforated MS sheet Sheet Thickness of Locker 0.9 mm - Length of Glass Sheet ±10 (mm) 450 mm - Width of Glass Sheet ±10 (mm) 280 mm - Sheet Thickness of door in mm 1.24 mm - Sheet Thickness of sides, back, Top and Bottom 0.8 mm (Minimum) - Sheet Thickness of Shelves 0.8 mm - Sheet Thickness of Pedestal in mm 0.8 mm (Minimum) - Material of Lock Brass and steel finish - Material of Keys brass and steel finish - DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1855 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1 450 Width in mm (± 7 mm) 910 760, 910, 1023, 700 Depth in mm (±5 mm) 480 430, 455, 480, 486, 270, 3 70, 400 Inside Height of Locker in mm (± 5 mm) 465 mm - Inside Width of Locker i 380 mm - 2/4 mm (±5 mm) Inside Depth of Locker in mm (±5 mm) 455 mm - Width of Stiffner in mm (±5 mm) 125 mm - Thickness of MS Sheet of Stiffner (in mm) 0.8 mm - Stiffened Pedestal height in mm (±2 mm) 125 - Pedestal Width in mm (±2 mm) 70 - COLOUR & FINISH Finish powder coated - Colour of Paint steel gray - Packing: Gutta Packing - CERTIFICATION ISI marked false - CM/L No. - - WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Subhash KB 671316, TEJASWINI PERIYA 11 15

Class Room Desking and Seating Average Turn Over of Last 3 Years 1000 Lakh (s) Experience with Gov. Required 5 Year (s) Class Room Desking And Seating ( 250 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK ONLY TABLE DESK, ONLY SEATING, INTEGRATED DESK CUM SEATING, INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK, ONLY TABLE/DESK WITH SHELF/STORAGE UNDER DESK Desking Configuration TWO SEATER SINGLE SEATER, TWO SEATER, THREE SEATER, FOUR SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 1500 750, 800, 850, 1000, 105 0, 1100, 1150, 1200, 125 0, 1300, 1350, 1400, 145 0, 1500, 1550, 900, 940, 4 70, 920, 960, 1375, 1800, 1830, 1860, ONLY SEATING NO DESK, 600 DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 18 mm thick prelaminated Particle Board 20 mm thick MDF Board of grade SBG II conforming to IS 12406 1/8 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side, 18 mm thick prelaminated Particle Board, 25 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, 19mm thick Commercial Block Board BWP grade Conforming to IS 1659, 38mm thick Commercial Block Board BWP grade Conforming to IS 1659, 19mm thick Decorative Block Board BWP grade Conforming to IS 1659, 38mm thick Decorative Block Board BWP grade Conforming to IS 1659, 19mm thick Commercial Block Board MR Grade Conforming to IS 1659, 38mm thick Commercial Block Board MR Grade Conforming to IS 1659, 19mm thick Decorative Block Board MR Grade Conforming to IS 1659, 38mm thick Decorative Block Board MR Grade Conforming to IS 1659, 25mm thick teak wood, 18mm thick teak carved wood, 18mm thick Other wood, 25 mm thick prelaminated plywood with 0.8 mm ± 0.2mm thick 2/8 laminate, 18 mm thick prelaminated plywood with 0.8 mm ± 0.2mm thick laminate, ONLY SEATING NO DESK Material of Support Structure or Side Pannel Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm SS 202 STRUCTURE, SS 304 STRUCTURE, WOODEN STRUCTURE, TEAK WOOD STRUCTURE, Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm, Side Panels of 18 mm Prelaminated MDF board coforming to Designation PLMDF-23 of IS 1487-1998 and all plane sides edge banded with PVC tape of 2 mm thickness with the help of hot melt glue, 19m mthick Commercial Block Board BWP grade Conforming to IS 1659, 38mm thick 3/8 Decorative Block Board MR Grade Conforming to IS 1659, 18mm thick teak wood, 60mm x 35mm x 1.2mm thick CRC capsule pipe frame Height of Desk Top in mm (±5 mm) 750 500, 550, 600, 650, 700, 7 50, 810, 875, 92 0, ONLY SEATING NO DESK Width of Desk Top in mm (± 5 mm) 380 350, 400, 300, 450, 520, 6 50, 380, 325, 600 SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) 18 mm thick prelaminated Particle Board 12 mm Thick Plywood Only, 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, 19mm thick 4/8 Decorative Block Board MR Grade Conforming to IS 1659, 25mm thick prelaminated plywood having 0.8 mm (± 0.2mm) thick prelaminated sheet, ONLY DESK NO SEATING Material of Support Structure Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm SS 202 STRUCTURE, Side Panels of 19mm thick Commercial Block Board BWP grade Conforming to IS 1659 and all plane sides edge banded with PVC tape of 2 mm thickness with the help of hot melt glue, Side Panels of 19mm thick Commercial Block Board BWP grade Conforming to IS 1659 and all plane sides edge banded with CP Teak Wood Lipping, Side Panels of 19mm thick Decorative Block Board BWP grade Conforming to IS 1659 and all plane sides 5/8 edge banded with PVC tape of 2 mm thickness with the help of hot melt glue, Side Panels of 19mm thick Decorative Block Board BWP grade Conforming to IS 1659 and all plane sides edge banded with CP Teak Wood Lipping, Side Panels of 19mm thick Commercial Block Board MR grade Conforming to IS 1659 and all plane sides edge banded with PVC tape of 2 mm thickness with the help of hot melt glue, Side Panels of 19mm thick Commercial Block Board MR grade Conforming to IS 1659 and all plane sides edge banded with CP Teak Wood Lipping, Side Panels of 19mm thick Decorative Block Board MR grade Conforming to IS 1659 and all plane sides edge banded with PVC tape of 2 mm thickness with the help of hot melt glue, Side Panels of 19mm thick Decorative Block Board MR grade Conforming to IS 1659 and all plane sides edge banded with CP Teak Wood Lipping, ONLY DESK NO SEATING, 35mm x 20mm x 1.2mm thick CRC capsule pipe frame Material of Seat Cushion WITHOUT CUSHION 40 mm thick PU foam of density 40 gram per cubic cm, WITHOUT CUSHION, ONLY DESK NO SEATING Width of Seating in mm (±10 mm) 340 300, 360, 500, 5 50, 568, 320, 34 0, 270 6/8 Height of Seat in mm (±10 mm) 440 400, 460, 750, 420, 44 0, 370 Width of backrest if provided in mm (± 5 mm) 270 200, 220, 240, 260, 270, 2 80, No Backrest, 370, 430 Back Support for Seating of Same materail as Seating Provided without cushion Provided with Cushion, Provided without cushion, back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) NO - Colour of finish brown - Desk top finishing All sides Edge to be banded with PVC tape of 2 mm thick with help of hot melt glue - Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) NA - WARRANTY Warranty period in number of years 1 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Subhash KB 671316, TEJASWINI PERIYA 250 15 EMD Required No ePBG Required No

Televisions

Air Conditioner

Multimedia Projectors

Class Room Desking and Seating Class Room Desking And Seating ( 175 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK ONLY TABLE DESK, ONLY SEATING, INTEGRATED DESK CUM SEATING, INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK, ONLY TABLE/DESK WITH SHELF/STORAGE UNDER DESK Desking Configuration TWO SEATER SINGLE SEATER, TWO SEATER, THREE SEATER, FOUR SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 1050 As per GeM Catalogue. DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 18 mm thick prelaminated Particle Board As per GeM Catalogue. Material of Support Structure or Side Pannel Mild Steel Square Section of outside side minimum 25 mm and wall thickness As per GeM Catalogue. 1/4 minimum 1.2 mm Height of Desk Top in mm (±5 mm) 750 As per GeM Catalogue. Width of Desk Top in mm (± 5 mm) 380 As per GeM Catalogue. SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) 18 mm thick prelaminated Particle Board 12 mm Thick Plywood Only, 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side, 18 mm thick prelaminated Particle Board, 25 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, 19mm thick Commercial Block Board BWP grade Conforming to IS 1659, 19mm thick Decorative Block Board BWP grade Conforming to IS 1659, 19mm thick Commercial Block Board MR Grade Conforming to IS 1659, 19mm thick Decorative Block Board MR Grade Conforming to IS 1659, 25mm thick prelaminated plywood having 0.8 mm (± 0.2mm) thick prelaminated sheet, ONLY DESK NO SEATING Material of Support Structure Mild Steel Square Section of outside side minimum 25 mm and wall thickness As per GeM Catalogue. 2/4 minimum 1.2 mm Material of Seat Cushion WITHOUT CUSHION 40 mm thick PU foam of density 40 gram per cubic cm, WITHOUT CUSHION, ONLY DESK NO SEATING Width of Seating in mm (±10 mm) 340 As per GeM Catalogue. Height of Seat in mm (±10 mm) 440 As per GeM Catalogue. Width of backrest if provided in mm (± 5 mm) 270 As per GeM Catalogue. Back Support for Seating of Same materail as Seating Provided without cushion Provided with Cushion, Provided without cushion, back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) Can be configured as per buyer's choice within offered technical details - Colour of finish As per buyer's choice - Desk top finishing All sides Edge to be banded with PVC tape of 2 mm thick with help of hot melt glue - Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) 340 - WARRANTY Warranty period in number of years 1 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajeev Rajput 176206, Central University of Himachal Pradesh, Temporary Academic Block, Shahpur Chattri near Dramman, Distt. Kangra, H.P-176206 175 15

Desktops

End point protection software/appliances End Point Protection Software/Appliances ( 89 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF END POINT PROTECTION SOFTWARE(GOLDEN) Category Software Software, Appliance Software/Appliance Type Subscription Subscription, Perpetual Name of Software EPS 7.2 BUSINESS STANDARD 3 YEAR LICENSE 51- 350+ EACH USER - OEM Model/Part NO. 7.2 (2018) - Software/Appliance Version 7.2 (2018) - Date of Launch of Version 2018 - FEATURES AND FUNCTIONALITY PARAMETERS(GOLDEN) Mobile Endpoints Security false Global Threat Intelligence support true Advanced Protection for Virtual Environments true Signature based Protection true Data Protection Full disk and file true 1/4 Encryption Data Loss Prevention (DLP/IDLP) capability true Storage Security false Data backup/Data recovery false Cloud-Assisted Security Network false No. of days Training provided at site 6 to 10 0, upto 5, 6 to 10, 11 to 20, 21 to 30 Number of Years upto which support (warranty) is available from OEM Franchise online 3 0, 1, 2, 3, 5 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Anti-virus feature true - Anti-malware feature true - Anti-phishing feature true - Anti ransom ware true - Personal Firewall true - Network Attack Blocker true - Web Control/URL filtering true - Host - based Intrusion Detection/Prevention System(HIDS/HIPS/IPS/I DS) true - Host integrity true - Application Control false - Device Control true - USB Device Control true - Vulnerability asessment and patch management true - Deception Technology true - Browser protection true - Anti-theft Protection true - End point forensic true - File server Protection false - System Watcher false - Memory Protection false - Advance machine true - 2/4 learning Content filtering capability false - Auto-Sandboxing capability false - Device Authentication capability false - Centralized Management true - SUPPORTED HARDWARE REQUIREMENTS PARAMETERS Hard Disk Space Required 1 To 2 GB - RAM Size required 512 MB - CPU required 1 To 2 GHZ - Operating Systems supported (Driver) All Operating Systems - Hyper link compatibility matrix true - GENERIC PARAMETERS OF END POINT PROTECTION SOFTWARE Free Upgradation to Higher Version with in support period yes - Number of user handling capability Above 1000 - Concurrent user handling capability 10000 - Valid Licence copy to be provided YES YES Software supplied through URL Link - Certifications Benchmarking of Software Products YES - Installation and Demonstration true - List of items included in the package LICENSE - Hyper link to Data sheet YES - No of Software Appliances sold 10000 - Number of User Referance no. 1 with in Government Department email, phone no. of concerned authority where Software/Appliance installed 100 - 3/4 Details of Government Department email, phone no. Of concerned authority where Software/Appliance installed for above Yes it is available - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Subhash KB 671316, TEJASWINI PERIYA 89 15 EMD Required No ePBG Required No

Notebook Computers-laptop

Desktops

Tablets

Line Intractive UPS with AVR Experience with Gov. Required 2 Year (s) Line Intractive UPS With AVR ( 87 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 0.8/216 0.8216 Technology MOSFET-PWM MOSFET-PWM, IGBT- PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz, Single Phase Quasi-Sin-wave 230 V AC, 50 Hz Degree of protection IP-21 IP-21, IP 20 Inverter Efficiency (%) >/= 60% >/= 60%, >/= 70% Warranty for the battery from the date of delivery 1 year - Warranty for Line Interactive UPS 2 Years 1 Year, 2 Years, 5 Years Installation and commissioning instructions Yes - 1/4 CONSTRUCTIONAL Type of enclosure ABS - AC out put for printer (not through inverter) Yes Yes, No Inverter out put socket AC out put for printer (not through inverter) 3 Three pin 2 Three pin, 3 Three pin, Hard wiring, Not applicable FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) >/=10% - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 Yes - 2/4 pt-5/sec-1 Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes - Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date ETDC& 28MH&AMPM/S 14/12/2016 - Name Of Lab ETDC& 28MH&AMPM/S 14, NCR, DELIHI - Address of Lab EETDC& 28MH&AMPM/S 14, DELIHI, INDIA - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajeev Rajput 176206, Central University of Himachal Pradesh, Temporary Academic Block, Shahpur Chattri near Dramman, Distt. Kangra, H.P-176206 87 15 EMD Required No ePBG Required No

computer workstation Computer Workstation ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Form Factor Desktop Mobile, Desktop, AIO PROCESSOR Processor Make Intel Intel, AMD Number of Processors 2 1, 2 Processor Generation 7th N/A Processor Configuration Intel Xeon E5-2640v4 ( 10 Core, 2.4 GHz, 25 MB Cache, 90 Watt) Intel Core i3-6100 (2 Core, 3.7 GHz, 4 MB L3 Cache, 65 Watt), Intel Core i3-6300 (2 Core, 3.8 GHz, Intel Core i3-6320 (2 Core, 3.9 GHz, Intel Core i3-7100 (2 Core, 3 MB L3 Cache, 51 Watt), Intel Core i5-6400 (4 Core, 2.7 GHz, 6 MB L3 Cache, Intel Core i5-6500 (4 Core, 3.2 GHz, Intel Core i5-6600 (4 Core, 3.3 GHz, Intel 1/10 Core i5-7500 (4 Core, 3.4 GHz, Intel Core i5-7600 (4 Core, 3.5 GHz, 91 Watt), Intel Core i7-6700 (4 Core, 8 MB L3 Cache, Intel Core i7-6700K (4 Core, 4.0 GHz, Intel Core i7-6700HQ (4 Core, 2.6 GHz, 45 Watt), Intel Core i7-7700 (4 Core, 3.6 GHz, Intel Core i7-7700K (4 Core, 4.2GHz, Intel Xeon E3-1545M v5 (4 Core, 2.9 GHz, 45 Watt, Intel Xeon E3-1220 v5 (4 Core, 3.0 GHz, 80 Watt), Intel Xeon E3-1225 v5 (4 Core, Intel Xeon E3-1230 v5 (4 Core, Intel Xeon E3-1240 v5 (4 Core, Intel Xeon E3-1245 v5 (4 Core, Intel Xeon E5-1650 v4 (6 Core, 15 MB L3 Cache, 140 Watt), Intel Xeon E5-2609 v4 (8 Core, 1.7 GHz, 20 MB L3 Cache, 85 Watt), Intel Xeon E5-2620 v4 (8 Core, 2.1 GHz, Intel Xeon E5-2630 v4 (10 Core, 2.2 GHz, 25 MB L3 Cache, Intel Xeon E5-2650 v4 (12 Core, 30 MB 2/10 L3 cache, 105 Watt), AMD Ryzen 5 1400 (3.2 GHz, 8 MB Cache, 4 Cores), AMD Ryzen 5 1600 (3.2 GHz, 16 MB Cache, 6 Cores), AMD Ryzen 5 1500 (3.5 GHz, 4 Core), AMD Ryzen 3 1200 (3.1 GHz, AMD Ryzen 3 1300 (3.5 GHz, Intel Core i3-8100 (4 Cores, 6 MB Cache, Intel Core i3-8350K (4 Cores, Intel Core i5-8400 (6 Core, 2.8 GHz, 9 MB Cache, Intel Core i5-8600K (6 Core, 95 Watt), Intel Core i7-8700 (6 Core, 12 MB Cache, Intel Core i7-8700K (6 Core, Intel Core i7-7800X ( 6 Core, 8.25 MB L3 Cache, Intel Core i7-7820X ( 8 core, 11MB L3 Cache, Intel Xeon W-2175 ( 14 Core, 2.5 GHz, 19.25 MB L3 Cache, Intel Xeon W-2195 ( 18 Core, 2.3 GHz, 24.75 MB L3 Cache, Intel Xeon W-2102 ( 4 Core, 120 Watt), Intel Xeon W-2104 ( 4 Core, Intel Xeon W-2123 ( 4 Core, Intel Xeon W-2125 ( 4 Core, Intel 3/10 Xeon W-2133 ( 6 Core, Intel Xeon W-2135 ( 6 Core, Intel Xeon W-2145 (8 Core, 11 MB L3 Cache, Intel Xeon W-2155 ( 10 Core, 13.75 MB L3 Cache, Intel Xeon 4110 (8 Core, Intel Xeon 6138 ( 20 Core, 2.0 GHz, 27.5 MB L3 Cache, 125 Watt), Intel Xeon 6144 ( 8 Core, 150 Watt), Intel Xeon 6146 ( 12 Core, 165 Watt), Intel Xeon 3104 ( 6 Core, Intel Xeon 3106 ( 8 Core, Intel Xeon 4108 ( 8 Core, 1.8 GHz, Intel Xeon 4112 ( 4 Core, Intel Xeon 4114 ( 10 Core, Intel Xeon 4116 ( 12 Core, 16.5 MB L3 Cache, Intel Xeon 5118 ( 12 Core, Intel Xeon 5120 ( 14 Core, Intel Xeon 5122 ( 4 Core, Intel Xeon 6128 ( 6 Core, 115 Watt), Intel Xeon 6130 ( 16 Core, 22 MB L3 Cache, 125 4/10 Watt), Intel Xeon 6132 ( 14 Core, Intel Xeon 6134 ( 8 Core, 130 Watt), Intel Xeon 6136 ( 12 Core, Intel Xeon 6140 ( 18 Core, Intel Xeon 6142 ( 16 Core, Intel Xeon 6148 ( 20 Core, Intel Xeon 6152 ( 22 Core, 30.25 MB L3 Cache, Intel Xeon 6154 ( 18 Core, 24.25 MB L3 Cache, 200 Watt), Intel Xeon 8160 ( 24 Core, 33 MB L3 Cache, Intel Xeon 8180 ( 28 Core, 38.5 MB L3 Cache, 205 Watt), Intel Xeon 6140M (18 Core, Intel Xeon 6142M ( 16 Core, Intel Xeon 8160M ( 24 Core, Intel Xeon 6134M ( 8 Core, Intel Xeon E5-2603v4 ( 6 Core, 15 MB Cache, Intel Xeon E5-2687Wv4 ( 12 Core, 30 MB Cache, 160 Watt), Intel Xeon E5-2698v4 (20 Core, 50 MB Cache, 135 Watt), Intel Xeon E5-2623v4 ( 4 Core, 10 MB Cache, Intel Xeon E5-2637v4 ( 4 Core, 15 MB 5/10 Cache, Intel Xeon E5-2640v4 ( 10 Core, 90 Watt), Intel Xeon E5-2643v4 ( 6 Core, 20 MB Cache, Intel Xeon E5-2660v4 ( 14 Core, 35 MB Cache, Intel Xeon E5-2667v4 ( 8 Core, Intel Xeon E5-2683v4 ( 16 Core, 40 MB Cache, Intel Xeon E5-2687v4 ( 12 Core, Intel Xeon E5-2690v4 ( 14 Core, Intel Xeon E5-2695v4 ( 18 Core, 45 MB Cache, Intel Xeon E5-2697v4 ( 18 Core, 145 Watt), Intel Xeon E5-2699v4 ( 22 Core, 55 MB Cache, Intel Core i7- 7920HQ ( 4 Core, 3.1 GHz, 8 MB Chache, 45 Watt) CHIPSET Chipset Intel C612 N/A Number of PCI Slots 1 N/A Number of PCIe Slots Gen 3 (x 1, x 4, x 8 ) (Number) 1 N/A Number of PCIe Slots Gen 3 (x 16) 4 N/A GRAPHICS Type of Graphics Discrete Discrete, Integrated Graphic Card nVIDIA Quadro P2000 5GB AMD FirePro W2100 2GB, AMD Radeon Pro WX2100 2GB, AMD Radeon Pro WX3100 4GB, AMD Radeon Pro WX 4100 4GB, AMD Radeon Pro WX 5100 8 GB, AMD Radeon Pro WX 7100 8GB, AMD Radeon Pro WX9100 16GB, AMD Radeon Pro SSG 16GB, AMD Radeon 6/10 Pro WX4130 4GB, AMD Radeon Pro WX4150 4GB, AMD Radeon Pro WX7100 8GB, AMD Radeon Pro WX4150M 4GB, AMD Radeon Pro WX4170M 4GB, AMD FirePro W4190M 2GB, AMD FirePro W5170M 2GB, nVIDIA Quadro GP100 16GB, nVIDIA Quadro P6000 24 GB, nVIDIA Quadro P5000 16GB, nVIDIA Quadro P4000 8GB, nVIDIA Quadro P3000 6 GB, nVIDIA Quadro P2000 5GB, nVIDIA Quadro P1000 4GB, nVIDIA Quadro P600 2GB, nVIDIA Quadro P400 2GB, nVIDIA NVS 810 4GB, nVIDIA NVS 510 2GB, nVIDIA NVS 315 1GB, NA MEMORY RAM DDR4 DDR4 Operating Frequency 2400 N/A RAM Type ECC N/A RAM Size (GB) 256 RAM Expandibilty (GB) 1024 STORAGE Type of Hard Disk Drive - I SATA Size of Hard Disk Drive - I (GB) 4000 GB No of Hard Disk Drives - I 2 1, 2, 3 Type of Hard Disk Drive - II SATA Size of Hard Disk Drive - II (GB) 4000 GB No. of Hard Disk Drives - II (No.) 2 1, 3 OPERATING SYSTEM Operating System Windows 10 Professional 64 Bit with Media N/A OS Certifications Windows/Red Hat Enterprise N/A 7/10 Linux/Ubuntu Linux APPLICATION & CERTIFICATIONS Safety Certifications IEC 60950 -1 N/A ROHS Compliance Yes N/A TCO Compliance (for Monitors) TCO-07 N/A Applications Digital Content Creation (DCC), Electronic Design Automation (EDA), Mechanical Computer Aided Design (MCAD), Mechanical Computer Aided Engineering (MCAE) etc. N/A Applications Certification from OEM manufacturing Workstation Digital Content Creation (DCC), Mechanical Computer Aided Engineering (MCAE) etc. N/A BIS Registration Yes N/A BIS Registration Number under CRS of Meity R-67000094 N/A CONNECTIVITY Networking Interface Integrated Gigabit 10/100/1000 N/A Wi-Fi Connectivity NA N/A PORTS VGA Port 0 N/A HDMI Port 0 N/A Display Port 4 N/A Mini Display Port 0 N/A USB C with Thunderbolt Not-Available N/A Number of USB 2 Ports 7 N/A No. of USB 3.0 Port (No.) 4 N/A DISPLAY Display (antiglare, LED-backlit) Monitor Integrated, Monitor Display Type Non- Touch Touch, Non- Touch Display Size (cm) 80 Panel Type IPS N/A Display Resolution (Full HD or better) (Pixel) 3840 X 2160 8/10 POWER Maximum Power (Watt) 1300 N/A Power Efficiency Minimum 80% N/A Power Management Unit 1300 N/A OTHERS Keyboard Standard Keyboard N/A Mouse Optical Scroll Mouse N/A Optical Drive DVD N/A No. of DIMM Slots (No.) 16 N/A No. of Internal Bays (No.) 4 N/A No. of External Bays (No.) 2 N/A Security Trusted Platform Module, Data Protection, Local HDD data wipe via BIOS, Chassis lock slot support, Chassis Intrusion Switch, Setup/BIOS Password N/A Availability of Bundled Softwares Application Optimizer Software N/A On Site OEM Warranty (Year) 3 1, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajeev Rajput 176206, Central University of Himachal Pradesh, Temporary Academic Block, Shahpur Chattri near Dramman, Distt. Kangra, H.P-176206 2 15 EMD Required No ePBG Required No

Printer or photo Copier Paper Printer Or Photo Copier Paper ( 500 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes N/A Test Method as per IS: 1060 Yes N/A Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297, 297 X 420 Size of the Paper A4 A4, A3 GSM of Paper 75 75, 80, 90, 95 Quantity Number of Sheets per Ream 500.0 500 Physical Characteristics Brightness in % 80.0 Tensile Index MD in Nm/g 40.0 N/A Tensile Index CD in Nm/g 25.0 N/A Opacity in % 85.0 N/A Tear Index (Avg) in Nm.m²/g 4.5 N/A Smoothness for both sides (Bendtsen) in 150.0 N/A 1/2 ml/min Thickness in µm 95.0 N/A Moisture in % 4.0 N/A Stiffness MD 2.0 N/A Stiffness CD 1.0 N/A Surface Strength Dennison (Wax Pick) >= 12 A 12 N/A * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajeev Rajput 176206, Central University of Himachal Pradesh, Temporary Academic Block, Shahpur Chattri near Dramman, Distt. Kangra, H.P-176206 500 15 EMD Required No ePBG Required No