Department Of Defence Production Tender Results

Goods Transport Service – Per Trip based Service - Defence Store; Open Body Taurus; 16 FT Truck

POTASSIUM PERCHLORATE POWDER SIZE 125 MICRON IS SIEVE TO SPECN. JSS-6810-58 2020 (REV. NO. 5) NSN NO.

PLUG FIRING REPRESENTING FUZE YDB-60 TO DRG. NO. NASK 998 (PROV) DATED 31/12/2012.

Goods Transport Services - Per MT - DEFENCE GOODS; Open Body Taurus; 16 FT Truck

STEEL SQ. BAR 25 MM( X 500 MM LONG OR MULTIPLES) TO SPECN. IS: -4431-1978. Gd. 40 C 10 S 18 (B) ., ST. RD. 175 MM DIA X 1070MM LENGTH TO SPECN. IS: 5517- 1993, DESIGN. GD 40Ni6Cr4 MO3 (RS-63) ESR/VAR. SULP, STEEL ROUND BAR 90 MM DIA TO SPECN. IS: 5517-1993, GRADE 40 Ni6 Cr4 Mo3 (LRS-63) . SUPPLY CONDITION: - AS, ST. RD. BAR 140MM DIA X 1050 MM LENGTH TO SPECN. IS: 5517- 1993 GD. 40Ni6 Cr4, MO3, LRS- 63) ESR/VAR, SULPHUR, STEEL ROUND BAR 150 MM DIA X 1300 MM OR ITS MULTIPLES IN LENGTH TO SPECN-IS: - 5517- 1993, Gd. 40 NI 6, ST. RD. 110 MM X 1820 MM LENGTH TO SPECN. IS: 4367-1991 40 Ni6 CR 4 Mo3 ESR/VAR. SULPHUR-0.015 PHOSPHOURO, STEEL ROUND BAR TO SIZE 65.00 MM DIA x 1800 MM LENGTH TO SPE CN. NO. IS: -5517-1993, GD. 40 Ni6 Cr4 MO3, (, ST. RD. BAR 56 MM DIA X1150 MM LENGTH TO SPECN. IS: 5517- 1993, GD. 40 Ni6, Cr4, Mo3. LRS-63) MATL. SHOULD BE, STEEL ROUND 90MM DIA STD. LENGTH TO SPECN: IS: 5517-1993 GRADE 40 Ni6 Cr4 Mo3 (RS-63) ., ST. RD. 145MM DIA TO SPCN. IS: 5517-93 DESIG. 40 Ni6 Cr4 Mo3. LRS- 63) LFVD WITH CALCIUM SILICATE TREATMEN, ST. RD. 105MM DIA TO SPECN. IS: 4367-91GD. 40 Ni6 Cr4 MO3 ESR/VAR S= 0.016, P= 0.03 AS PER SPECN, IS: 4163- 82

ARM SEAR CONNECTING (THROUGH MIM ROUTE) FOR PISTOL AUTO 9 MM

SPARES FOR CHERRY PICKER

MICRO GRAIN SOLID CARBIDE CENTER CUTTING END MILL DIA 16 MM FL 30 TO 35, OAL 85 TO 95, SHANK DIA 16M

COVER FOR BPV29000 TO DRG NO. BPV29103 LF 7440201416

SPRING PIPE -DIA 17 - 130053120194, SPRING PIPE -DIA 7 - 130053120334

2 TYPES OF PUMPS

GLASS BEADS

SUN BOARD FOR DISPLAY

Handling and Transport on Lumpsum Basis - Handling & Transport Service

2 TYPES OF HDPE TANKS

ASSY. SPARE WHEEL LIFTING UNIT COMPLETE INCLUDING ASSY HANDLE & ROPE TO DRG. NO. V-350-2541-0026

HAMMER (THROUGH MIM ROUTE) FOR PISTOL AUTO 9MM

RADIATOR ASSY

Commercial Veneers (Q3)

2345colour photo with frame

FINISH MACHINING OF EYE BOLT/SCREW AS PER DRG. NO. 2A26-02-155

FINISH MACHINING OF BOLT AS PER DRG. NO. 2A26-01-31

VALVE GLOBE STEAM SERVICE 40 MM NB BRONZE HEAVY DUTY FLANGED DRILLED ENDS TO IBR TABLE-` H' PRESSURE

LARGE PULLEY WITH LINING - 130075100134, SMALL PULLEY WITH LINING - 130075100094

JTM0103995121A-PLANKS - 20mmX6” X6’ -8’ L, JTM0103995122A-PLANKS - 20mmX8” X6’ -8’ L, JTM0103995123A-REAPER– 3” X1” X6’ -8’ L, JTM0103995124A-REAPER– 3” X3” X6’ -8’ L

Kit Field Poro & Remote S/S SE - 8644889831

Radiography, Rectification Work & SR of Trail Spade Casting

HINGE II LH FOR STEEL UNIT LOAD

ANTISIZE COMPOUND PART NO. OK-2501 (400 ML SPRAY PACK), WELL SEAL JOINT PART NO. DTD9004139 (IN 100 ML TUBE)

HINGE I RH FOR STEEL UNIT LOAD

SIGNAL ANALYSER

6% AFFF COMPOUND

OSAERO Insourcing for supply of structural assembly of Front Fuselage Floor Assembly, NLG Doors, Air

25 LTR GEYSER (WATER HEATER)

COVER DRG/SPC NO. BL8040869

COVER DRG/SPEC NO. BL8040868

ALUMINIUM SILICON MASTER ALLOY V OF COMPOSITION CU- 0.10% MAXSI 9-11%, FE-0.60% MAX, MG-0.10% MAX ALU

MANUFACTURE & SUPPY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND-2692* WITH FIRMS MATERIAL

Custom Bid for Services - ANNUAL MAINTENANCE CONTRACT FOR ELECTRONIC CONTROL WATER PURIFIER SYSTEM AND REVERSE OSMOSIS WATER PURIFIER SYSTEM (SCOPE OF WORK AS PER ANNEXURE) Similar Category ANNUAL MAINTENANCE SERVICES FOR WATER PURIFICATION AND CONDITIONING SYSTEM (Version 2) Water Drilling Service Water Audit Service

30.5 Meter High Flag Mast

DANDELION FOUNTAIN

4-40 TANGLESS HELICOIL INSERTING TOOL (PREWINDER HAND TYPE), MAKE: KATO/ARMSTRONG HELICOIL/HELICO, 2-56 TANGLESS HELICOIL INSERTING TOOL(PREWINDER HAND TYPE), MAKE: KATO/ARMSTRONG HELICOIL/HELICOI, 8-32 TANGLESS HELICOIL INSERTING TOOL(PREWINDER HAND TYPE)

130076614614 TO 4684

Three bond, Adhesive Three bond

INDEXABLE HEAD CHAM DRILL BODY WITH COOLANT HOLES & ONE FLAT SHANK OF DIA: 20.9MM, L/D-5 OF ISCAR ORD.

TIMBER MANGO SIZE 1200MM X 37MM X 80MM TO SPECN. IND/ME/883(F) DC 5452-ME DATED 01/06/2016 WITHOU, TIMBER MANGO SIZE 1000MM X 37MM X 110MM TO SPECN. IND/ME/883(F) DC 5452-ME DATED 01/06/2016 WITHO, TIMBER MANGO SIZE 1200MM X 82MM X 28MM TO SPECN. IND/ME/883(F) DC 5452-ME DATED 01/06/2016 WITHOU, TIMBER MANGO SIZE 110MM X 110MM X 800MM TO SPEC. IND/ME/883(F) DC 5452-ME DATED 01/06/2016 WITHOU, TIMBER MANGO SIZE 1200MM X 120MM X 25MM TO SPEC. IND/ME/883(F) DC 5452-ME DATED 01/06/2016 WITHOU

REINFORCED ABRASIVE CUT OFF WHEELS. SIZE: 400MM X 3.2MM X 31.75MM. GR: A30 T8 BL4R THE WORKING RPM OF T

753377015666/BENCH VICE 6 INCH HEAVY DUTY DOUBLE RIB

CANTEEN ITEMS