Department Of Defence Production Tender Results

MANUFACTURE AND SUPPLY OF CLINO SUPPORT BRACKET, 11F-01-GEN3-078-A, H/D/TL/26/8/1.

GYRO CORD BL2564011-01 ME LF-7441123492, SIGHT CORD BL3811046ME LF-7441123490

THRUST RING/172.52. 136

OSTOOL- MANUFACTURE AND INSTALLATION OF NOSE BOX ASSY JIG-LH & RH, PACKAGE/SET OF 2 LINES, TPMS25/47/2

Custom Bid for Services - Service Visit Charges for maintenance of Bauer make high pressure nitrogen booster compressor as per scope of work for first year, Custom Bid for Services - Service Visit Charges for maintenance of Bauer make high pressure nitrogen booster compressor as per scope of work for second year, Custom Bid for Services - Service Visit Charges for maintenance of Bauer make high pressure nitrogen booster compressor as per scope of work for third year Similar Category Support Services Support Services Support Services

Rubber Compound ERP-1287

R110.08. 0601

Bimetal Bandsaw Blade 5450 x 41 x 1.27mm

94 types of PCBs

COPPER SEEMLESS TUBE, OD-12.7 X 1 MM THICK X 2750 MM LONG

KZHIS. 321454.003, KZHIS. 321454.004-01

Manpower Outsourcing Services - Minimum wage - Highly- Skilled; As per Annexure A; Healthcare, Manpower Outsourcing Services - Minimum wage - Skilled; As per Annexure A; Healthcare

Digital Multimeter (Q3)

Manpower Outsourcing Services - Minimum wage - Skilled; as per attached scope of works; Others

Markersand Highlighters (Q4)

Manpower Outsourcing Services - Minimum wage - Skilled; Not Required; Others

PIN/54.26. 098-A, PIN/GOST: 9650(8X32)

FAN ASSY/175.70. 024CB

ROUGH MACHINING OF ADAPTOR TO DRG NO. : SK-3294 AS PER SOW-ADAPTOR ROUGH MACHINING/01.

UNION PIPE/175.41. 076A/F

SHAFT, PINION/172.25. 065/F

SFSDT-05-28-G-03.93-DRNDX, 10 POSITION CABLE ASSEMBLY RECEPTACLE SOCKET TO SOCKET, P/N: SQT-110-01-L-D-RA, CONNECTOR HEADER THROUGH HOLE 20 POSITION RIGHT ANGLE RECEPTACLE, P/N: TFM-105-01-L-D-RE1-WT, CONNECTOR HEADER THROUGH HOLE 10 POSITION RIGHT ANGLE, BUS CABLE, P/N: P/N: 10614-9, MIL STD 1553 DATA ( 200 meter )

P/N: 122247, TNC PANEL CRIMP JACK(FOR RG-179/U CABLE), P/N: 122117, TNC CRIMP PLUG (FOR RG-179U, 187/U, B9221 CABLE)

1- DO228-8123 - IS/GEN/421, 2- DO228-8123 - IS/GEN/421, 3- DO228-8125 - HM4922, 4- DO228-8125 - HM4922

Pheripheral Inserts for U Drill dia 60mm, Central Inserts for U Drill dia 60mm, Peripheral insert for U Drill dia 0.875, Centre Insert for U Drill dia 0.875 inch

MANDREL ROD FOR COLD SWAGING M/C NO. SAF-5300 AS PER DRG NO SKM-1093 FOR FORGING OF BARREL MAG GUN 7.

MACHINING ASSISTANCE FOR VMC OPERATIONS OF SHAFT2 TO DRG. NO. Y17031A-00.

SUPPLY, INSTALLATION & COMMISSIONING OF E POWER SCR THYRISTOR(160A), PART CODE: E POWER/3PH160A/690V

MACHINING ASSISTANCE FOR VMC OPERATIONS OF SHAFT 4 TO DRG. NO. Y17336A-00.

Supply of 1 Pair 20 AWG Green PTFE Cable

Cyber Security Audit - External Cyber Security Audit of IOL and its units

COPPER SULPHATE TECHNICAL

COMPRESSOR WITH WATER DRAINAGE PUMP TO DRG. NO: 765-78-SB281

Manpower Outsourcing Services - Minimum wage - Semi- skilled; Not Required; Non-IT Technical

7 POLE SOCKET to Part no. 131400239000

7 POLE SOCKET to Part no. 131857019000

7 POLE SOCKET to Part no. 131400238000

EAR MUFF FOR PROTECTION FROM HIGH DECIBEL NOISE NRR RANGING FROM 30 dB TO 36 dB. AS PER TECHNICAL SP

INDIAN NATIONAL FLAG 30’ X20’ MATERIAL 100% KNITTED POLYESTER (160 GSM) WITH REINFORCED STRONG NYLON

PURE NICKEL (99% PURE) STRIP SIZE NOT MORE THAN 4" X 4" X 15 MM.

Manpower Outsourcing Services - Minimum wage - Skilled; AS PER NIT; Others, Manpower Outsourcing Services - Minimum wage - Highly-Skilled; AS PER NIT; Others

DESIGN, ANALYSIS, PDR, CDR AND DOCUMENTATION FOR THE DEVELOPMENT OF PINTLE MOUNT FOR 12.7 MM HMG AL

FEED MECHANISM & COVER ASSEMBLY AS PER DRG. NO. 1804 01 04 00 00 000 00DD REQUIRED FOR LMG 7.62 X 51

BOX C-51A (P-1) IS MODIFIED BOX OF C-51A REQUIRED FOR PACKIN G OF SHELL 125MM HE FILLED INERT PRF WI

7" DIGITAL LCD MONITOR to Part no. 470EG05001, ADAPTOR to Part no. 470EG05042

Rear View Camera to Part no. 470EG05059, Side View Camera to Part no. 470EG05067

DOUBLE WHEEL BARROW AS PER DRG. NO. SK-9515

CONVERSION FORG. TO DRG NO 64C 3009 200 E3 MATERIAL WILL BE SUPPLIED BY OFT. REQD FOR GAS PISTON C30

Grease Gun Drg No. 155.28. 670 CB, Locking Bolt Drg No. 432.24. 013-2, Stand Assembly Drg No. 175.95. 068CB, Nuts for Knocking out Track Pin Assy Drg No. 613.28. 44 CB- A, Nuts for Setting Pins Drg No. 613.464, Pin Serving to Case the Connection of Tracks on Tank Drg. No. 54.28. 594, Wrench for Nut of Idler Disc Drg. No. 54.28. 632 1-B, Wrench Socket Drg No. 175.90. 006 CB, Wrench for Rod Wheel Nuts Drg. No. 54.28. 211 CB-A, Pointers Drg. No. 172.91. 056 CB, Rod for Remounting the Track Pins Drg No. 54.28. 595, Small Rod for Knocking Track Pin Drg No. 155.28. 1622