Department Of Defence Production Tender Results

SMA 50 Protective P dust cap, LED (RED), LED (GREEN)

Repair and Overhauling Service - Chair Office (V2); GODREJ INTERIO; Yes; Buyer Premises

Manpower Outsourcing Services - Minimum wage - Skilled; High School; Others

AIR-138902, M 83248 1 118, M83248 1-113, 8500-781 B1, M39029-1-100, BLC3RA12S

SCISSOR LIFT TABLE CAPACITY-350 Kg AS PER SPECIFICATION NO. SBP/55/023/PROC DATED. 06/10/2025., SCISSOR LIFT TABLE WITH CAPACITY 650KG AS PER SPECIFICATION NO. SBP/55/023/PROC DTD. 06/10/2025.

BOSS M6X12X16 OST 3-1496-72, BOSS M8X16X40 OST: 3- 1496-72

Rotary Stage With Digital Readout

Screw Pump

POLY ALUMINIUM CHLORIDE

SLIDING DOOR STORAGE RACKS

BATTERY FANUC PART NO: A98L-0031-0025 (DESCRIPTION: BR-2/3 AGC T4A) Make-Fanuc.

Manpower Outsourcing Services - Minimum wage - Unskilled; High School; Others, Manpower Outsourcing Services - Minimum wage - Unskilled; Not Required; Others, Manpower Outsourcing Services - Minimum wage - Semi- skilled; Not Required; Others

PAPER BAND FILTER IN ROLL FOR FILTERING OF OIL SOLUBLE TO SIZE; WIDTH 460 MM X 100 MTRS LENGHT X FIL

INDEXIBLE CARBIDE INSERT TO ISO CODE CNMG. 120412 GC 3015 OR TK 15. OTHER DETAILS AS PER ANNEXURE.

Breath Analyser (Q3)

OSTOOL MANUFACTURE AND SUPPLY OF SPECIAL REAMER

Brake Chamber TY 30/30 - 498BR02074

Calibration of Lab Equipment 9C 2026

P/N: SPU240RS/11TNC/11SMA/2500 MM, RF CABLE TNC (PLUG) -SMA (PLUG), REQUIRED LENGTH= 2.5 METER, SLEEV, P/N: SPU400RS/11TNC/11TNC/2500 MM, RF CABLE TNC (PLUG) - TNC (PLUG), SLEE, P/N: SPU240RS/11TNC/11SMA/1000 MM, RF CABLE TNC (PLUG) - SMA (PLUG), REQUIRED LENGTH= 1.0 METER, P/N: SPU400RS/11TNC/11TNC/1500 MM, REQUIRED LENGTH= 1.5 METER

PN.D38999-20-F-H-35AN, PN.JD38999-20-F-C-98PN, PN.JD38999-26-F-H-35SN, PN.JD38999-26-F-C98SN, BACK SHELL PN.M85049-38S13N, CONNECTOR PN.M85049- 38S23N, PIN CONTACT PN.10-407552-55

WEDGE LOK, P/NO: MVA260-2.80ETM2 LK

RF CABLE ASSEMBLY, P/N: S284B00069

JOB WORK CONTRACT FOR FORGING (155 MM SHELL) PRODUCTION ON FORGING COMPLEX-II FORGING PLANT AT OFAJ

OUTDOOR TYPE CONVEX MIRROR

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Industry Unit; Metal build up by Laser cladding and Hard Chrome Plating of Rudder Ram Rod of P75; As per SOW

Custom Bid for Services - Reinforcement of dump body floor plates sidewall plates and exhaust gas channel plates repair of BH205E x 7 dumpers 03 nos at NCL Amlohri and 04 nos at NCL Nigahi Project Similar Category Repair and Overhauling Service

6206102447 LOCK NUT/175.63. 030, 6206802089 NUT 175.05. 049-01, 6206805003 NUT/172.05. 044, 6206805038 NUT/175.05. 051

BUSHING TO DRG NO. 514-33(AS PER DRAWINGS AND SPECIFICATIONS)

ASSEMBLY CLIP TO DRG NO. SB 3321-05 4

THYRISTOR DRIVE POWER CONTROL UNIT FOR FURNACES, NOM VOLT 3PH 415V, 50HZ, AC, CURRENT 160 A, AUXILI

THYRISTOR DRIVE EUROTHERM MAKE, E-POWER MODULE/3PH/100A/600V/230V/XXX/XXX/XXX/XX. OR EQUIVELENT SUB

ELECTRONIC FLOW MONITOR, MAKE: IFM, TYPE NO. SI5000, OPRATING VOLTAGE 19-36 VDC, DC PNP SWITCHING OUTP

OKS-2501 ANTISIZE COMPOUND (400 ml SPREAY PACK), DTD9004139 WELL SEAL JOINT (100 ml TUBE)

125HM41595-BRACKET CASTING

125TM51839-GEAR FORGING

AMPLIFIER, P/N: CMPA206003 5F, 35 W; 2.0 - 6.0 GHz; 28V; GaN MMIC POWER, P/N: CGHV50200F- AMP, 4.4- 5.0GHz, GAN HEMT IS INCLUDED, P/N: CGHV50200F, 200W, GAN HEMT, 50V, 4.4-5.0GHz, IM FET, FLANGE, P/N: CMPA2060035F-AMP2, 2-6 GHz - AMP2

3M 8561 P U PROTECTIVE TAPE (3 INCH X 36 YARDS)

094.2142

104.06. 45.005, 104.06. 68.007, 96.17. 00.037

Dot Matrix Printers (V2) (Q2)

Selection of Laboratories for Testing of Products/Material - ULTRASONIC TESTING OF 10 point 3 MM THICK ALUMINIUM ALLOY SHEET; As per enclosed Annexure A; As per enclosed Annexure A; As per enclosed Annexure A

CADMIUM ANODE

400V battery panel along with batteries

SMCRCA Coil, size 1.25 mm Thick x 1250 mm width

Box C51A Brackets

Readymade Strengthening Plate Drg. No. OFB/C/1546

Custom Bid for Services - CONTRACT FOR GARBAGE COLLECTION FROM OFA QUARTERS AND GARBAGE BINS IN ORDNANCE ESTATE AMBARNATH AS PER SCOPE OF WORK ENCLOSED Similar Category Collection & Disposal Waste Management Service

Custom Bid for Services - Hiring of services for non explosive activities at Unit VIII for opening and lacquering of shell 125 MM HE Similar Category Facility Management Service- Manpower based (Version 2)

ENCLOSURE FOR POWER CONDITIONER TO PART NO - 50421204

E-Tourist Vehicle/Golf Cart (V3) (Q2)