Department of Defence Research and Development Tender Results

Battery cable for exoskeleton actuator, Power and communication cable for exoskeleton actuator, IMU Sensor cable, Ethercat slave daisy chain cable

Procurement of Ready to Fit Low Pressure Turbine Rotor Blades and Vane Sub Assemblies

Acetone, Loctite 222, Loctite 242, Loctite 272, 596 Flange Sealant 300ml, Anabond 662 Silicone Grease, Paints Blue, Paints Yellow, Paints Green, Paints Red, Molycote D 321 R 400ml, M Seal 50gms, Dunlop Solutions, Araldite 90 gms, Mild steel plate 1000 X 1000 X10 mm, Mild steel plate 1000 X 2000 X 8 mm, Mild steel plate 1000 X2000 X 4 mm, WD40 Multipurpose cleaning spray 420 ml, F 36 Fibre glass Adhesive tapes 25 mm X 25 mts, Mild Steel C Channel 75 X 50 X 5 mm, Mild Steel Angle 50 X 50 X 6 mm, Mild Steel Angle 40 X 40 X 6 mm, Mild Steel Angle 25 X 25 X 5 mm, Mild Steel plate 1000 X 2000 X 6 mm

Tooling and Accessories for Vertical Trimming Machine

Optical Modulators with Driver circuitries

Water Purification System with UV (Ultra-Violet Process) or UV (Ultra-Violet Process)+UF (Ultra-Filtration Process) (V2) (Q2)

Fabrication & Supply of DP Main Sled (with allied items)

Micro Spatula-IS:3888 (Q3) MSE Relaxation for Years Of Experience Yes | Complete Startup Relaxation for Years Of Experience Yes | Complete

Back Strength Dynamometer

Customized AMC/CMC for Pre-owned Products - RO PLANT AT CVRDE CEC; RO PLANT AT CVRDE CEC; Comprehensive Maintenance Contract (CMC); Not Applicable; Yes

DGR Empanelled ESM Security Services

Design Manufacturing and Supply of Environmental Conditioned enclosure for Filament Winding Machine

DSC cell part no. 90279090 as per specification No. HEMRL/EMR/DSC CELL/2025/01

IFM Pressure Transducsr (PA-30-4/20), Proportional Relief Valve, Pressure Throttle Valve, Linear Scale

4/2-Ch Module LAN-XI 3160-A-042-R

Embedded Sensing and Control Hardware

Laboratory Plastic Ware and Miscellaneous Items

Carbon Fiber Reinforced Polymer (300 Mm X 300 Mm X 1mm) Panel, Carbon Fiber Reinforced Polymer (300 Mm X 300 Mm X 2mm) Panel, Carbon Fiber Reinforced Polymer (600 Mm X 600 Mm X 1mm) Panel, Carbon Fiber Reinforced Polymer (600 Mm X 600 Mm X 2mm) Panel, Carbon Fiber Rohacell Sandwich Reinforced Polymer (300 Mm X 300 Mm X 7mm) Panel, Carbon Fiber Rohacell Sandwich Reinforced Polymer (600 Mm X 600 Mm X 7mm) Panel, Glass Fiber Reinforced Polymer (300 Mm X 300 Mm X 1mm) Panel, Glass Fiber Reinforced Polymer (300 Mm X 300 Mm X 2mm) Panel, Glass Fiber Reinforced Polymer (600 Mm X 600 Mm X 1mm) Panel, Glass Fiber Reinforced Polymer (600 Mm X 300 Mm X 2mm) Panel, Glass Fiber Rohacell Sandwich Reinforced Polymer (300 Mm X 300 Mm X 7mm) Panel, Glass Fiber Rohacell Sandwich Reinforced Polymer (600 Mm X 600 Mm X 7mm) Panel

Cloth Bag for Solvent Extraction Process

Minus 12 to plus 15 PSID Pressure Scanner 32 Channel 0 point 063Inch OD and 90deg orientation pneumatic tubulation Purge Gen 2 DTC with single range calibration, Minus 12 to Plus 30 PSID Pressure Scanner 32 Channel 0 point 063Inch OD and 90deg orientation pneumatic tubulation Purge Gen 2 DTC with single range calibration, 0 to plus 75 PSID Pressure Scanner 32 Channel 0 point 063Inch OD and 90deg orientation pneumatic tubulation Purge Gen 2 DTC with single range calibration, DTC INITIUM DATA ACQUISITION SYSTEM, Power supply cum DTC Intium Interface unit Universal AC Input 24V DC output, Power and Commnication cable integrated Cat 5 power hardware trigger circular twist lock connection 10 feet length

SPECTROPHOTOMETER (Q2) (3 (3 ))

Forklifts (V2) as per IS 6765:2003 and IS 10517 (Q2) MSE Relaxation for Years Of Experience and Turnover Yes | Complete Startup Relaxation for Years Of Experience and Turnover Yes | Complete Document required from seller Experience Criteria, Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2026/B/7117524 Dated : 16-01-2026 Bid Document 1/11 Number of Auto Extension count 3 Bid to RA enabled Yes RA Qualification Rule 50% Lowest Priced Technically Qualified Bidders Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Pre Dispatch Name of the Empanelled Inspection Agency/Authority DRDO Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 84000 ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 18 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be 2/11 in favour of Beneficiary, wherever it is applicable. Beneficiary : OS & Scientist H High Energy Materials Research Laboratory, Department of Defence Research & Development, Office of DG (ACE), Ministry of Defence (The Director, Hemrl)

CELL CULTURE CO2 INCUBATOR

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Office Space; REPAIR OF HUMAN DECOMPRESSION CHAMBER WITH ONE YEAR CMC; Service Provider

Design, Construction and supply of steel boat

High temperature Adhesive: Part-A Resin, High temperature Adhesive: Part-B Hardener

FOUR CHANNEL CONDITIONING AMPLIFIER

Toner Cartridges/Ink Cartridges/Consumables for Printers (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Power Supply of FESM

Piezorezistive Pressure Transducer, Glass Test Tube with an evacuation port, Winstab 3

Orthophosphoric Acid, Assay 88%, Pack size 5 Litres

High Speed Spin Test Facility as per spec no: HEMRL/TEG/HSSTF/2025

FPGA Debugger and Tester

Custom Bid for Services - Job work for setting up of system integration and test facility for T-LFBMS Similar Category Operation And Maintenance Of Electro-Mechanical Installations Operation And Maintenance Of Other Machines And Plants Operation and Maintenance Of Electrical Systems/Electrical Installations

DGR Empanelled ESM Security Services

High End Desktop Computer (Q2) (3 (3 ))

High End Work station with Xeon W9-3475X36C and UPS as per Specifications

Customized rig for fighter based AESA Radar testing

Integrated Virtual Meeting System for Video Conferencing

Custom Bid for Services - Provision of technical support for comouflaging in the surrounding of Security main gate area Similar Category Support Services

Multifunction Printer (Print, Scan, Copy) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Polyester Round Slings (Q4) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Customized AMC/CMC for Pre-owned Products - Rotary Evaporator with Vacuum Pump and Chiller; Heidolph; Annual Maintenance Contract (AMC); Quarterly; No

Customized AMC/CMC for Pre-owned Products - AMC For Josts Make Battery Operated Platform Trucks -17 Nos For 3 Years - 01 Job; Nil; Annual Maintenance Contract (AMC); Bi- Monthly; No

Customized AMC/CMC for Pre-owned Products - AMC for high temperature vacuum furnace and vacuum strip casting furnace for 03 years - 01 Job; Nil; Annual Maintenance Contract (AMC); Once in four months; No

Custom Bid for Services - AMC OF CATH CHAMBER, Custom Bid for Services - AMC OF DUST CHAMBER Similar Category Customized AMC/CMC for Pre-owned Products Customized AMC/CMC for Pre-owned Products

Endpoint Detection and Response (EDR) Appliance Software (Q2) ( PAC Only ) MSE Relaxation for Years Of Experience and Turnover Yes | Complete Startup Relaxation for Years Of Experience and Turnover Yes | Complete

Stationary Valve Regulated Lead Acid Batteries (V2) as per IS 15549 (Q3) MSE Exemption for Years Of Experience and Turnover Yes | Complete Startup Exemption for Years Of Experience and Turnover Yes | Complete Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3 Bid Number : GEM/2025/B/6862608 Dated : 24-11-2025 Bid Document 1/8, -- Number of days for which Bid would be auto -- extended 10 Number of Auto Extension count 3 Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 7 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Post Dispatch Name of the Empanelled Inspection Agency/Authority DRDO Auto CRAC Days 60 Evaluation Method Total value wise evaluation Bid Details EMD Detail Required No ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 28 (a)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : The Director DMRL, P.O. Kanchanbagh, Hyderabad-500058 2/8 (Director)

EDM Brass Wire (Q3)

Valve Regulated Lead Acid (VRLA) Batteries as per TEC Specification (Q3) (3 (3 ))