Loading
Loading…
Loading…
125 results • Latest
Supply, Installation, testing andcommiss
DC ANALOG AMPERE METER (0-100 AMP) 75mV FD PANNEL MOUNTED 96X96 MM SUITABLE FOR FITMENT IN TOWER WAGON .
Balance weight for 4303 BY/DY traction motor armature as per Drg No.ER.KPA.EL.TM.4HE.4156.
OUT GOING CABLE LEAD (LEAD WIRES FOR BRUSH GEAR CONNECTOR AND MAIN LEAD CABLE) FOR DEMU TRACTION MOTOR WITH BOTH SIDE LUG. as per drawing NO. 3CB/DMU/DPC 265.
Twin Beam LED Head Light (ROUND SHAPED) , conforming to RDSO Specification No.RDSO/2017/EL/SPEC/0134 Rev-2, system volt 85V-138V( Nominal 110V) Suitable for conventional MEMU ,Mounting Arrangement As Per RDSO Sketch SKEL-5042 ALT- 0.
Side Bearer Complete (Item No. 1 to 7) as per ICF Drg. No. EMU/M-1-1-027, Alt. l/5.
Throttle Valve ( Raising) to Schunk Part No.909010013100 and drawing No.T 1000C2800 for Schunk pantograph WBL-85-HR pantograph MAKE BRAND:SCHUNK .
LEAD WIRE AA (CGL Drawing No- CGM/306509R0 ,CGL Material Code-767055180.
Intermediate ring to MEDHA Part No. SPTSA006223P0001 Suitable for 1600HP DEMU and 3 phase MEMU traction motor type TME 48-45-6.
1/2 CHECK VALVE (SOFT SEATED ), FAIVELEY PART NO.- 702005000, FAIVELEY MAKE .
KIT PISTON RING DIA 127mm TO ELGI PART NO. 072403479 FOR 1400HP DEMU COMPRESSOR (CONSISTING OF 3 ITEMS)
LEAD WIRE A (CGL Drawing No- CGM/306508 R1 ,CGL Material Code-762055179.
Speed sendor (pulse generator) type T813M to MEDHA part No. 813400003 make medha servodrives, suitable for fitment in MEDHA speedometer.
Supply, installation and commissioning
HEX. HD. BOLT M24x90 (Item No. 12) with PREVAILING TORQUE TYPE NUT M24 (Item No.14) and INTERLOCK WASHER SUITABLE FOR M24 BOLT (Item No. 15) as per ICF Drg. No. ICF/ STD-2-2-009, Alt. j
Thinner for PU Paint compatible with PU Top Coats as per RDSO Spec. No. M&C/PCN/100/2018 with additional requirement as per RDSO Amdt. No. 1B (Rev.2.0) in 20 Litre Metal Packing .
LEAD WIRE FF (CGL Drawing No-CGM/306510R0 #1 ,CGL Material Code-763055181 FOR TRACTION MOTOR TYPE-C1005 CGL MAKE.
Fuel Oil Level Gauge Assembly to DLW Drg. No. TPL-0379, Alt. f (Sheet 1 of 5, Part No. 11440028/For Line-1)
Diode PIV leakage current Test unit Specification 1. Microcontroller based unit 2. 4 Digital PIV display 3. Digit leakage current display 4. 4 Digit set voltage display 5. Short current protection ,Current limited to set leakage current-max 30mA. 6.PIV voltageupto 2500V
SILICON OIL PRODUCT NAME AVI LUBE S-40 OF M/S AVI-OIL INDIA PVT.LTD. OR SILICON LUBRICANT 1609 OF M/S 3M OR XIAMETER PMX-200. OR SILICON FLUID 350 CST OF M/S DOW CORING OR SILICON 20-300.000,350 CST OF M/S MATRIX SPECIALITY LUBICANTS.
Balance weight for CGL TM type-C-1005 as per Drg No.ER.KPA.EL.TM.4HE.4157.
PTFE Ring for TM 2141C Width 32 +/- 0.5mm Thk. 1.0 + 0.5mm for heat - shrink fitment on armature dia 242mm for tower wagon.
Simplified Battery Charger to Specn. No. ICF/ELEC/067 ( Rev- A), CS-2.
ARCHING HORN FOR TRACTION MOTOR TYPE 4601-AZ, AS PER DRG NO.WR-CCG-EL/4M-TM- 205 REF 1 TO 4
(1) PU Paint TELEGREY 4 to RAL-7047 as per RDSO Spec No. M&C/PCN/100/2018 (w.e.f. 01.04.2018) with RDSO Amendment No.1B as an Additional Requirement. (2) PU Paint BLACK (two packs) as per RDSO Spec No. M&C/PCN/100/2018 (w.e.f. 01.04.2018) with RDSO Amendment No.1B as an Additional Requirement.
Sliding Door Arrangement (Left Hand Assy) for BG/EMU Coaches, Fabricated Steel Design, as per Drawing No. EMU-5-8-044, COL-I, Alt. v & Latest.
DRAIN VALVE KIT TO FTRTIPL PART NO. 790029175
Air hose to Schunk Part No. 909010018100 & Drawing No. 3-W04.6194.for Schunk panto WBL 85 HR
INK, ADJUSTING FOR ALTERNATOR T0 CUMMINS PART No. 3237859 FOR 1400HP DEMU DPC .
DIPSTICK WITH CAP & CHAIN ELGI PART NO.-070407170, FILTER OVER FLOW DCM PART NO.-070407080 , WASHER COPPER STRAIN DCM PART NO.-070406770 FOR MEMU
Oil Pump Assembly (000325600) ELGI Part no: A 070030 Make: ELGI.
Inter/After Cooler
"MOTOR WITH CAPACITOR FOR TRANSFORMER OIL COOLER FOR BG AC EMU COMPLETE WITH FAN, 0.5 HP, 2.5 AMP, 240V AC, SINGLE PHASE, CAPACITOR START & CAPACTOR RUN. AS PER ICF SPECN NO. ICF/ELECT/014 REV-A AND OVERALL DIMENSION OF MOTOR, SHAFT SIZE, SHAFT LENGTH, LOCATION OF FIXING HOLE SHALL BE AS PER DRG. NO. ICF/SK-9-0-606 ALONGWITH LATEST AMENDMENT/ALTERATION IF ANY. CAPACITOR SHALL BE AS PER ICF CORRECTION SLIP 01 OF SPEC ICF/ELECT/014 REV A"
RELAY NVR TO BHEL DRG.NO.35831030015P1 CATA SPC 588 or BEIL Drg No. B358310300150P1 SUITABLE FOR FITMENT IN MEMU MOTOR COACH.
carbon brush size-8mm*20mm*32mm, grade-EG116S (assam carbon) or E49 (1) electro carbon.
RELAY ABR M/s BHEL DRG NO. 35831030015P3 CS NO ACS 1252 OR M/ s BEIL PART NO. B358310300150P3 SUITABLE FOR MEMU MOTOR COACH
LIMIT SWITCH AS PER SIBASS MODEL NO. XCK-J, EC947.5.1, UI 400V, AC15, 240V 3A CELENEC EN50041, IP 66, UL LISTED 170M OR VAISHNO HOTLINE V-9 LIMIT SWITCH 1NO+1NC, 415V, 50HZ, 1.5A, AC15/DC13 THERMAL CURRENT Ith 10A/240V AC/30V DC RATED IMPULSE VOLTAGE 1.5KV.
Outer Door Assembly (Left Hand) as per ICF Drg. No. T-5-1-673, Alt. w/18, Col-I
1 -1/4 INCH ISOLATING COCK WITHOUT VENT TO LEGRIS /LAMINAR PART NO.04023242 OR M/s. FTRTIPL PART NO. 023002000 OR M/s. KBIL PART NO. I. F. 1071 .
(1) Spring Lock Washer (3/8") to DLW Drg. No. TPE-13-0022, Alt. s, Item No. 3 (2) High Tensile Hex Head Cap Screw, M10x1.50x30mm Long, Full Thread, Grade 8.8 or Above, conforming to IS:2269-2006.
Look Out Glass (confirming to IS:2553, Part-1) for DETC as per Drawing No. DMC/DPC7-9-0- 704, Alt f. (Item No. 1,2,3,4)
P.V. Expansion J-Type Base Moulding, Size 60x15x3x2000 mm Long to C&W Drawing Office/ER/LLH Drg. No. SK No. LLH-02/2009, Alt. 2, Item No. 8, Material as per RDSO Spec. No. RDSO/2015/CG-02, Rev.-1(Amendment-1), Colour Satin Blue to IS 5:2007(Item No. 177)
Brake Block Hanger Outer (Complete) to ICF Drg. No. EMU/M-3-2-049, Alt. f/2 (Item No. 1 & 2) .
MICROSWITCH 2A 250V AC, 0.25A 250V DC, 6.3MMX0.8MM SQUARE BODY (PRODUCT LENGTH 51MM, PRODUCT HEIGHT 38MM PRODUCT WIDTH 17MM) K TYPE INDICATOR SYSTEM SUITABLE FOR POWER RECTIFIER OF MEMU MOTOR COACH.
LOCK WASHER MB 12 size ID60XOD73XTHICKNESS1.5MM FOR 18.5 KW ALTERNATOR FOR 1400 HP DEMU .
Set of Items consist of 3 items, [i] HEX HEAD BOLT M16X90, Item No. 21 to IS:1364(P-1)83 4.6 TAB-1&2 with full threaded, Qty. 1 Nos./Set, [ii] HEX NUT M16, Item No. 22 to IS:1364(P- 3)83 4 TAB-1, Qty. 1 Nos./Set, [iii] SPRING WASHER M16, Item No. 23 to IS:3063 72 TAB-1 TYPE-B (IS:4072-75, Gr-3), Qty. 1 Nos./Set, as per ICF Cattle Guard Assy. Drg. No. DMU/DPC5- 2-6-501, Alt. d
High tensile hex head full threaded bolt of size M16X110 mm, pitch 2 mm (coarse), grade 10.9 or higher with two plain washer of ID 17 mm, OD 30mm & thickness 3mm; one spring washer ID 16 mm, OD 25 mm & thickness 3 mm; and two hex nut, confirming to IS 1364 for nut and bolt; IS 3063 for washer, along with split pin of size 3x50 mm confirming to IS 549. Split pin hole of dia 3.3 mm at a distance of 5 mm from free end. (Note: Supplier should provide material duly tested for load as per IS 1367)
ROUND TYPE FOG LAMP WITH BULB (HL-H3) 24V ,100/70 WATT LAMP SIZE DIA.-142 MM TO 150 MM MOVING HORIZONTAL-75 DEGREE,VERTICAL-6 DEGREE MAKE -AUTOPAL OR EQUIVELENT (Total 80 Nos.- 40 Nos. Yellow, 40 Nos. White)