Loading
Loading…
Loading…
32 results • Latest
HEX HEAD SCREW (MS) M14 x 70 MM
TERMINAL LUG 1/4 EMD PART NO 8130629
BRUSH STARTER MOTOR.EMD PART NO.1852886, DELCO REMY PART NO. 1906989.
TAP CHANGER TRANSITION DIVERTER RESISTANCE (RGR)
Resistance 4.7 Ohm,1000 watt as per drawing no. MEI/W-WRES/26122017-12 with inverted clamp height of 100 mm and suitable for fixing in existing panel board of size 400 x 250 mm as per CLW Specification no. CLW/ES/C-47/I suitable for RC damping panel for auxiliary winding of transformer
Motor for machine room blower to CLW specification - CLW/ES/3/0020 Alt-H and as per RDSO Spec No - SPEC/E-10/3/09 (MOTOR)
Rubber kit for H-5 Relay air valve to wabco cat no.587579
Rubber kit for HB-5 Relay Valve.
One set of interchangeable torque wrench handle (9X12) mm shank size range :(10- 100)Nm with interchangeable open ended heads of shank size (9X12)mm open size 16mm, 17mm,18mm, 19mm,14mm & 15mm. One set consists of one interchangeable torque handle & 6 Nos. of interchangeable open ended heads. Valid calibration certificate must be provided.
Hydraulic heavy lifter table with gas lock Capacity-350 kg Max Height-960 mm,min.Height-240 mm,Lifting Height-660 mm,Fold-Two Step,Platform size- 855x500x50 mm,distance to handle-970 mm,Overall Length-925 mm,step time when Lifting-<32/>45,Wheel Diameter-127 mm,container Load-120 Pcs,self weight- 82kg Fitment accessories for pit lifting for instsllation.
Tooth spacing K value checking and Profile checking gauge
Digital Surge Comparison Tester 5 KV with Capacity with graphical and Numerical (%Error) representation between the waveforms As per Specification attached.
SUPPLY ,INSTALLATION COMMISSIONING AND TESTING OF MOTORIZED HYDRAULIC PRESS MACHINE FOR REMOVING AND PROVIDING FOR AXLE BOX BEARING FOR CONVENTIONAL LOCO (WAP-1/WAP4 LOCO) CAPACITY 60 TON
Set of Fixing cables(safety sling for Push/Pull rod)
cleaning agent for cleaning of sintered bronze capsules of T type strainers as per specification as per annexure Make Metaklenz or ITS Equivalent.
UNION TEE for 6 mm OD nylon tube as per Drg. No. 1209-18-406-109 ALT-5
TERMINAL SUPPORT INSULATOR ASSLY. FOR TM TAO-659 & HS 15250A TO CLW DRG.NO. 3TWD.092.188 ALT.- 5 (WITH PART DRGS.).
Oil Servo Press 150 approved by RDSO as per Servo Press 150 RR of M/s.IOC, MAK Compressor Oil-150 of M/s.BPC, Hycom 150P of M/s.HPC.
Male connector M10x1-8, deepx6mm OD NYLON TUBE AS PER DRG.NO.0/4/65/433 ALT-1
MOTOR SPRIT PETROL (MS PETROL)TO IS:2796/2000(MS-87ON).
PORTABLE BATTERY CHARGER FOR THREE PHASE AC LOCOMOTIVES AS PER SPECIFICATION.
Baking oven with Trolley (Curing Furnace) as per Technical Specification in enclosed annexure. Make:Science Tech, Jhalani or Similar.
UNION TEE for 6 mm OD nylon tube as per Drg. No. 1209-18-406-109 ALT-5
Unirex N2 Grease lithium complex for traction alternators of EMD locos, Make: IOC/BPC/MOBIL.Material is to be procured from OEM/authorized dealer of OEM only.
Supply, Installation and Commissioning of EOT Crane 05 Ton Capacity
Supply, installation and commissoning of EOT Crane 15 ton Capacity as per enclosed COFMOW Specification and Leading Parameters as per annexure 'B' to 'E' and as per Special Condition Annexure 'A'
Tap Changer (GR) complete for electric locos type WAG-7 & WAP-4 as per RDSO specn. no.ELRS/SPEC/GR/0039 (Rev 1)
KABA Key Air supply isolating cock of Pantograph for 3phase locomotive
Resistance 4.7 Ohm,1000 watt as per drawing no. MEI/W-WRES/26122017-12 with inverted clamp height of 100 mm and suitable for fixing in existing panel board of size 400 x 250 mm as per CLW Specification no. CLW/ES/C-47/I suitable for RC damping panel for auxiliary winding of transformer
PORTABLE BATTERY CHARGER FOR THREE PHASE AC LOCOMOTIVES
Water reservoir assembly (Capacity - 8 litres ) for wiper assembly of 3-phase Locomotives
HOSE FOR CAB HEATER AS PER CLW SPEC.NO. CLW/ES/3/436 ALT-A, CLW DRG.NO.CLW/ES/3/SK1/0436