Directorate Of Technical Education Government Of Tender Results

Bench vise MSME Exemption For Years Of Experience And Turnover Yes Bench Vise ( 30 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Standards Conformity to Standard with latest amendments IS: 2586 (1986) IS: 2586 (1986) BIS marked false true, false If BIS marked Yes indicate BIS license no other wise indicate NA NA * Performance Parameters Types of Bench vices Fixed base Fixed base Type of construction Cast Cast The fixed jaw and the base of the vice shall be soundly constructed to shape in one piece and the base shall have flange or lugs to provide for atleast three holes for Yes * 1/4 mounting The handle shall be straight and shall slide freely in the hole provided at the end of the screw spindle Yes * The castings or fabricated components shall be sound, free from sand holes, pits, blowholes, scrabs and other imperfections Yes * All components shall be free from cracks, rust, seams, flaws and other defects Yes * The Movable jaw shall be soundly constructed to shape and shall be so designed that the vice is statically balanced Yes * The screw spindle shall move freely in the spindle nut without any undue play and stiffness Yes * The spindle nut shall have a length of the nominal diameter of the screw spindle At least 2.5 times * Waranty (Years) 1 1 Material and Dimensional Parameters Material of Body for Bench Vice Grey cast iron conforming to minimum grade FG 200 of IS : 210-1978 Grey cast iron conforming to minimum grade FG 200 of IS : 210-1978, Steel cast conforming to Grade 3 of IS : 1030: 1974, Steel flats conforming to IS : 226-1975 Material of Movable jaw Grey cast iron conforming to minimum grade FG 200 of IS : 210-1978 Grey cast iron conforming to minimum grade FG 200 of IS : 210-1978, Steel flats conforming to IS : 226-1975 Material of Swivel base plates Steel cast conforming to Grade 3 of IS : 1030: Grey cast iron conforming to 2/4 1974 minimum grade FG 200 of IS : 210-1978, Steel flats conforming to IS : 226-1975 Material for Jaw plates Tool steel conforming to desigation 55T8 of IS: 3749:1978 * Material for Screw spindle and handle Steel conforming to desigation Fe410 of IS: 1570 (Part 1): 1978 * Material for Spindle nut Grey cast iron conforming to minimum grade FG 200 of IS: 210-1978 Grey cast iron conforming to minimum grade FG 200 of IS: 210-1978, Phosphor bronze conforming to IS : 28-1975 Nominal size of bench vice in mm (width of the jaw) (tolerance of ± 2 percent) 100 100 Minimum mass of Fixed base bench vices (in kg) 10.5 3, 4.5, 6, 7, 10.5, 15, 15.5, 20, 25, NA for Swivel base bench Minimum mass of Swivel base bench vices (in kg) NA for Fixed base bench vice NA for Fixed base bench vice The hardness of the jaw plates (in HV) (445 HV to 596 HV) * Reports Availability of test certificate from Government/NABL ILAC accredited lab to prove conformity of specifications false true, false Copy of Test report shall be furnished to buyer on demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramkumar Uikey 461111, Govt. Polytechnic College Itarsi, Sankheda Road, Near Canal, Itarsi, District Hoshangabad 30 15 3/4 Madhya Pradesh, Pincode 461111

Class Room Desking And Seating ( 150 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK, INTEGRATED DESK CUM SEATING Desking Configuration TWO SEATER THREE SEATER, TWO SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 1050 1050 DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 18 mm thick prelaminated Particle Board * Material of Support Structure or Side Pannel Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm 1/3 Height of Desk Top in mm (±5 mm) 750 * Width of Desk Top in mm (± 5 mm) 400 * SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) 18 mm thick prelaminated Particle Board * Material of Support Structure Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm * Material of Seat Cushion WITHOUT CUSHION 40 mm thick PU foam of density 40 gram per cubic cm, WITHOUT CUSHION, ONLY DESK NO SEATING Width of Seating in mm (±10 mm) 300 * Height of Seat in mm (±10 mm) 460 * Width of backrest if provided in mm (± 5 mm) 200 * Back Support for Seating of Same materail as Seating Provided without cushion Provided with Cushion, Provided without cushion, back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) Can be configured as per buyer's choice within offered technical details * Colour of finish brown * Desk top finishing All sides Edge to be banded with PVC tape of 2 mm thick with help of hot melt glue * Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) 300 * WARRANTY Warranty period in number of years 1 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 2/3 1 Madhusoodan Sharma 471201, ENGINEERING COLLEGE NOWGONG NH -75 JHANSI CHHATARPUR ROAD NOWGONG DISTT CHHTARPUR MADHYA PRADESH 150 15

Multimedia Projectors Average Turn Over of Last 3 Years 5 Lakh (s) Experience with Gov. Required 3 Year (s) Multimedia Projectors ( 1 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Specifications Technology DLP LCD, DLP, Lcos, SXRD, Three Clip DLP Projection Method Front * Native Resolution 1920 x 1200 (WUXGA) * Brightness (Lumens) 5000 * (or higher) Contrast Ratio (Minimum) (pixels) 3000:1 * Zoom Feature Yes * If Yes, Zoom (%) 1.6 * Availability of Lens Yes * If Yes, Type of Lens Short Throw * Aspect Ratio 16:10 * Keystone Correction Automatic & Manual Both * 1/4 Projection Lamp UHP UHP, LED, Laser, LED & Laser Hybrid, UHE Minimum Life of projection Lamp (In Normal Mode) (Hours) 2, 000 * Lamp Hour Counter (In- Built) Yes * Video Compatibility PAL * Inbuilt Speaker Yes * HDMI/DVI Port Yes * Analog RGB In Port (Hours) Yes * Analog RGB Out Port Yes * Audio In Yes * Audio Out Yes * Video In Yes * Storage Media Port (USB- Type A ) No * WiFi Availability No * Wireless Screen Share No * LAN Connectivity Yes * 3D Ready Yes * Power Consumption in Sleep Mode (Watts) 0.5 * Power Consumption in Normal Mode (Watt) 6 * Noise Level in Sleep Mode (dB) 33 * Noise Level in Normal Mode (dB) 36 * Power Supply 210V-240V, 50 Hz * Operating Temperature Range (Degree C) 0-40 * Operating Humidity (RH %) 30% * Dimensions (mm x mm x mm) 411.4 x 118.4 x 267.5 * Weight (Kg) 4.9 * BIS Registration under CRS of Meity Yes * BIS Registration Number - * 2/4 Battery No * If Yes, Battery Capacity NA * If Yes, Battery Backup Time (Hour) 0 * ON Site OEM Warranty 1 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jashwant Kumar Suryavanshi 465441, GOVT. POLYTECHNIC COLLEGE CAMPUS, MODEL HIGHER SECONDARY SCHOOL, NARWAL ROAD, AGAR, MALWA (NEW DISTRICT) 1 15

Dry Erase Writing Boards Dry Erase Writing Boards ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values Performance Parameters Purpose of writing board Writing Writing, Writing cum Projection screening Material of Board Ceramic Steel Ceramic Steel, Ceramic Steel with Engraving/Porcelain Enamel Steel with engraving Material of Frame Anodized extruded Aluminium alloy hollow section of designation 63400 conforming to IS: 1285 Anodized extruded Aluminium alloy hollow section of designation 63400 conforming to IS: 1285 Material of Back Cover Galvanized steel sheets conforming to IS:277 Galvanized steel sheets conforming to IS:277 Thickness of Back Cover 0.25 - Thickness and Material of back support (conforming to IS:12406) 9.0 Top surface coating thickness of sheet in mm 0.095 1/4 % Gloss at 60 deg.head (min.) 2% green, blue, black colours 80% for white colour only, 2% green, black colours, 60% for white colour only Surface suitable for writing with chalk for colour & black board Dry marker ink for white board only, chalk for colour & black board Back surface coating thickness of sheet (min) 0.03 Thickness and material of top steel sheet Having Viterious Enamelled coating on both side 0.3 Excellent Erasability without leaving impression Yes Yes Warranty in years 1 1, 2, 3, 4, 5 Dimensional parameters Dimensions of the Board in feet (width x height ) 4 x10 4 x10 Dimensions of Boards in mm x mm (width x height ) 1200 X 3000 450 X 600, 600 X 900, 900 X 1200, 1200 X 1800, 1200 X 2400, 1200 X 3000, 1200 X 3600 Wall thickness of Anodized Aluminium Frame (Min) in mm 1.2 1.2 Colour of Board Green Green, Black, White Frame Width in mm 20.0 20 Additional Items One Magnetic Type Eraser Yes - 4 nos dry erasable ink markers(Green/blue/re d/Black) No - one set of 6 Pcs paper holding magnets for white board only false - one box of 50 nos non dust chalks sticks true - one dry wipe duster 3 nos spare sponges for colour and black board false - 2/4 Reports Availability of Type Test Reports of the product from Central Govt/NABL/ILAC accredited Lab showing compliance to the specification YES YES, No Test Report No - - Test Report Date - - Name of the Lab - - Complete Address of the Lab - - copy of test reports to be furnished to the buyer on demand at the time of supplies (Applicable if availability of test report indicated as YES, otherwise put NA) YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Madhusoodan Sharma 471201, ENGINEERING COLLEGE NOWGONG NH -75 JHANSI CHHATARPUR ROAD NOWGONG DISTT CHHTARPUR MADHYA PRADESH 8 15