DIV. DEPOT/R/SOUTH EAST CENTRAL RLY Tender Results

Supply, Installation & fixing of 380/400ltrs storage water cooler cooling capacity 170ltr/hours

Air Compressor. Fully Automatic. 3 HP. Double Stage. Tank Cap. 160 ltrs. 8 kg/cm2 "Elgi Make" or Equivalent. Model: Air Comp. 3 HP

Supply, Installation, Testing and Commissioning of Water Softner Plant.

Metal Liner as per drawing no. RDSO/T-8995, for use on sharp curve with wider PSC Sleeper to Drawing No. RDSO/T-8979 to RDSO/T-8982 Suitable to Rail 60Kg. (UIC)/60E1 & 52 Kg with latest alterations, if any and confiming to IRS Specification RS:T-56-2025, with latest amendment, if any as on date of opening of tender.

(i) Supply, Installation and commissioning of Hydraulic Press C Frame vertical type, Capacity 200 Ton with accessories as per attached Annexure. (ii) Five Years AMC After 24 months Warranty

Supply of 3 phase 5 HP, 5 star rated submersible pump with suitable fully automatic control panel & all accessories suitable for 100 mtrs head & 6000 LPH discharge. Make-Kirlosker, KSB, CRI or similar.

Printing of Safety Books & Forms, Revised format of T/369(3b) (New Format) duplicate in A4 size duly serial numbering, paper 70 GSM, pad binding, 100 leaves, printing in one side, qty 400 Nos., sample proof to be approved before supply.

FIRE EXTINGUISHER WITH ANTI-THEFT ARRANGEMENT IN NON AC COACHES

Supply, Installation Testing and Commissioning of Steam Boiler.

Loco lifting tackle assembly to suit 45 Tonnes Lifting capacity to RDSOs DRG. No. SK.DL.- 2671, ALT-2 , SK.DL.-2766,ALT-1. and SKDL-2670, As per Scope of Work, Specification & Drawing enclosed.

(i) Filter Cartridge, Plasser Part No: 90187/LF68E-KITN05, (ii) Filter Cartridge, Plasser Part No: 90187/LF68H-KITN0C, {Make: Plasser.}

Supply, installation and commissioning of "Refrigerated type air dryer capacity 500 CFM"

ABRASIVE RAIL CUTTER

Supply, Complete Installation and Commissioning of SMART ALC in MPT-2013 machine with required accessories, Make: Plasser

Top Non Refrigerated Centrifuge

Ferrous Scrap Bin as per specification

Fabrication, Supply, Manufacturing, Installation and Commissioning of Pradhan Mantri Bhartiya Jan Aushadhi Kendra (PMBJK).

Megaphone with rechargeable battery, product must be with rechargeable battery.

1. Brake Lining, Plasser Part No. WN146-900.K-2 Sub. WN146-900.K-3 2. Brake Lining, Plasser Part No. WN146-920.K-3A, Make: Plasser.

Waste Conveyor Belt for FRM, Plasser Part No. 64.11.2507, Size: 11750X790X10mm, Type- Endless as per Specification No. SECR/ENGG/TM/NGP/S/SPEC/CONV. Make: Plasser, Dunlop, Nirlon, MRF, MR, Virshubh, Biswas, Jagriti.

Supply of Multi SIM Aggregator/high speed internet bonding router with three Years Bonding Server license.

Set of gauges required for wagon inspection during routine/schedule overhauling as per Annexure enclosed.

Air Cleaner Element, Cummins Part No: 4020552 Sub : A034W978, Make: Cummins, Fleetguard, Donaldson.

Fuel Water Separator, Cummins Part No: 4345001 & Fleetguard Part No: FS19666, Make: Cummins, Fleetguard, Donaldson.

Supply of 5 star rated ISI marked single phase 220 v 50 Hz 02 HP deepbore submersible pump set with motor copper wound as per IS 8034 latest

Fuel Water Separator, Ashok Leyland Part No: F7B02900, Make: Ashok Leyland.

Supply of ISI marked 5 star rated 3 phase 415 v 3 HP deep bore submersible pump set with motor,

Axle Bolt, Plasser Part No: W37.1410-N as per RDSO Drawing No: TM/0554 Rev-1 & RDSO Specification No: TM/HM/6/245 Rev-1.

Air Cleaner Element, Cummins Part No: 4020551 Sub Part No: A034W979, Make: Cummins, Fleetguard, Donaldson.

Flat Permanent Magnetic Lifter

(1) Filter Element, OEPL Part No: 902603298, Make: OEPL. (2) MP Filter Element, OEPL Part No: 8HP0501A110ANP01, Make: OEPL.

Lock Bolting Machine with power pack and tool size- 1/2, 3/4, 5/8" & 7/8"

Main Conveyor Belt for FRM, Plasser Part No. RE30.325, Size: 40000X850X10 mm, Type- Open End as per Specification No. SECR/ENGG/TM/NGP/S/SPEC/CONV. Make: Plasser, Dunlop, Nirlon, MRF, MR, Virshubh, Biswas, Jagriti.

(i) Rubber Plate, Plasser Part No. 64.08.8178, (ii) Rubber Plate, Plasser Part No. 62.08.1256,(iii) Rubber Plate, Plasser Part No: 62.08.1259,Etc.{ Make: Plasser.}

(1) Pulse Transducer, Plasser Part No. 2159-01000003, Make: Plasser. (2) Connector_4P_Pulse Transducer, Plasser Part No. 2159-STECKER, Make: Plasser.

Connector 4P, Plasser Part No: FFA.2E.304.CLAC60ZN, Make: Plasser.

Pneumatic Cylinder, Plasser Part No. PN2Z-KF.50/18/28, Make: Plasser.

REVERSOR KEY FOR CONVENTIONAL LOCOMOTIVES AS PER DRG.NO.CLW DRG. NO. 3TWD.241.001.

Excavating Conveyor Belt for FRM, Plasser Part No. RE20.725, Size: 19500x500x10mm, Open End as per Specification No. SECR/ENGG/TM/NGP/S/SPEC/CONV. Make: Plasser, Dunlop, Nirlon, MRF, MR, Virshubh, Biswas, Jagriti.

(i) Relay, Plasser Part No: EL-T7125,(ii)Relay, Plasser Part No: EL-T7125-NA, (iii) Filter Element, Plasser Part No: HY-D501.80.10/420BAR/ES,(iv) Filter Element, Plasser Part No: HY-D501.250.10-B/ES, {Make: Plasser.}

WTB TCN Gateway as per AMiT make Type RRU-WEM/1158.

Top Non Refrigerated Centrifuge

Electronic Tourniquet Machine

Intermediate overhauling (IOH) Replacement kit (AAL) part.no. 4300007100/32).

1)Adaptor, Plasser Part No. 9/064533, Make: Plasser.,(2) Strip, Plasser Part No. RE20.378, Make: Plasser.(3) Sealing Ring, Plasser Part No. A26X32X1,5DIN7603-CU, Make: Plasser.(4)Angle, Plasser Part No. 64.09.8414, Make: Plasser

Piston Rod with Piston, Plasser Part No. HZ10.125.050.0500.1, Make: Plasser

Grease, Part No: Mobilith SHC 220, Make: Mobil.

Solenoid Valve, Part No: 4420191151 Sub No: 4420197142, Make: ZF.

(1)Filter Element, OEPL Part No: V3.0623-703, Make: OEPL, (2) Filter Element, OEPL Part No: F7.0833-06, Make: OEPL.

1) PLASSER INDIA PVT LTD (2) PLASSER INDIA PVT LTD