DLS NKJ/WEST CENTRAL RLY Tender Results

Plastic sleeve for mounting

Control Transformer 415

Terminal box for earth shunt

Safety washer VS-16

Set of polymide Bushes

DUNGRY CLOTH COTTON KHADI

Rocker Ring

Set of Maintainance Components

Control Transformer 415

Set of polymide Bushes

Battery charging and discharging panel

Supply of One set of operating tools for [Supply of One set of operating tools for Wago terminals with the partially insulated shaft of following blades sizes and similar to wago make part nos. (1) 2.5 x 0.4 mm (Part No. 210-719) - 10 Nos. (2) 3.5 x 0.5 mm (Part No. 210-720) - 10Nos. (3) 5.5 x 0.8 mm (Part No. 210-721) - 10 Nos. (4) 3.5 x 0.5 mm (Part No. 210-657) - 10 Nos. (5) 3.5 x 0.5 mm (Part No. 210-658) - 10 Nos. (6) 2.5 x 0.4 mm (Part No. 210-647) - 10 Nos. (7) 2.5 x 0.4 mm (Part No. 210-648) - 10 Nos.]

Battery Box assembly as per CLW S Spe

Flat wire Resistor for input filter

Infrared Anti-collision device having

SET OF ERMETO NIPPLE,REDUCER

Supply, Installation & testing of Hydrau

5 pin Plug, 30A, 415V AC

Wire rope lubricant for spray

Wire rope lubricant similar to ST WR

Set of connector assly

Manual Operated Chain Pulley

Paint Aluminium brushing,

Supply of One set of operating tools for [Supply of One set of operating tools for Wago terminals with the partially insulated shaft of following blades sizes and similar to wago make part nos. (1) 2.5 x 0.4 mm (Part No. 210-719) - 10 Nos. (2) 3.5 x 0.5 mm (Part No. 210-720) - 10Nos. (3) 5.5 x 0.8 mm (Part No. 210-721) - 10 Nos. (4) 3.5 x 0.5 mm (Part No. 210-657) - 10 Nos. (5) 3.5 x 0.5 mm (Part No. 210-658) - 10 Nos. (6) 2.5 x 0.4 mm (Part No. 210-647) - 10 Nos. (7) 2.5 x 0.4 mm (Part No. 210-648) - 10 Nos.]

Infrared Anti-collision device having

Set of Maintainance Components

Set of O-Ring Kit suitable for IRAB-9

REFILLABLE SEAMLESS STEEL CO2 GAS CYLIND [REFILLABLE SEAMLESS STEEL CO2 GAS CYLINDER AS PER IS : 7285 PART - 2 (2004), FILLED WITH 30 KG CO2 GAS FOR USE IN MAG/MIG WELDING WORK.]

Carbon Brush for Hitachi TM type HS-1050 [Carbon Brush for Hitachi TM type HS- 1050 ER-HS-15250 A to RDSO Drg. No. EL-3 BS-013 -Mod- ALT-5 or latest of Sep-03 with RDSO Spen No. ELR-S-SPEN-CB-0027-REV -O or latest.]

55 MM single ended open jaw wrenches (sp [55 MM single ended open jaw wrenches (spanner) as per GeM product Id:5116877-77989170872 or equivalent.]

Driver seat and pedestal

FINGER CONTACT WITH SHUNT COMPLETE FOR R [FINGER CONTACT WITH SHUNT COMPLETE FOR REVERSER 1500 AMP. TO CLW DRG. NO. 4TWD101.064 ALT. 6. as per Drg.No. CLW DRG. NO. 4TWD101.064 ALT. 6]

2 Amps HRC fuse 500V, 120KVA as per IS- [2 Amps HRC fuse 500V, 120KVA as per IS-13703 Part-II and IEC 269-2 for 3 Phase locos. Make- VIRAL or equivalent.]

NVR for HIKVISION

Spares suitable for 45 Ton

NEEDLE ROLLER BEARING ASSEMBLY FOR TM HS [NEEDLE ROLLER BEARING ASSEMBLY FOR TM HS-15250 A AS PER HITACHI DRG. NO. IOS-813-678 ALT.1 OR LATEST.(ITEM RESERVED FOR PURCHASE FROM CLW APPD. SOURCES) [ Note: Latest Alteration of Drawing will be acceptable ].]

DC Damping pannel complete

Wire Rope Slings of different sizes