Loading
Loading…
Loading…
76 results • Latest
Set of safety sling used for compressor of WAG9HC locos, as per Drg. No. ELS/VSKP/2015/32. All dimensions, specifications, and quantities of the items shall be strictly as per the drawing. (Note: (1) Load test certificate obtained from Government approval labs to be provided along with the supply. (2) One sample should be got approved before effecting bulk supply
Overhauling kit for Check Valve (KBIL-II67897 OR KP0592965) of KNORR BREMSE make CCB System for WAG-9 Locomotives. KBI KIT NO. XKI/KIT/01587. Kit consisting of 07 items as per Annexure.
CIRCUIT BREAKER OUTPUT BATTERY CHANGER BATTERY AND CONTORL CIRCUIT (POS NO. 110., 112., 112.1)TYPE-8, CLW SPEC.NO.- CLW/ES/03/0050 ALT-C OR LATEST
Piston Seal suitable for schneider Vacuum Circuit Breaker (single bottle) type 22CB VCB as per schneider Part No. NPRM5540023.
EBV display as per M/s. KBIL part no.775354 for CCB Brake system.
Mandatory Spares for 6th Yearly Overhauling of Gardner make Air Compressor as per GD part no. GDC-SP-OVH22A (Model - WLNA9BB) as per Annexure-B attached. ( 03 Items)
Housing Assembly over speed trip linkage (Assembly) to EMD Part No. 9546162
Non-return valve for CCB 2.0 Brake system of WAG9 3 Phase Locomotives to KBIL Part No. I.F.2766.
Supply of Air dryer (PCB) circuit main as per ELS/VSKP Drg. No. ELS/VSKP/2019/14 (Sheet 1 of 2)
PISTON & GP DIA100 as per ELGI part no.- 000477770 for ELGi make air compressor Model RR20100CG(M) of WAG9 locomotive.
Set of Locking Plates for Pivot ring and Housing ring of 3 Ph. locos consisting of 2 items. (1) Locking Plate for pivot ring to CLW Drg. No. 1209-01.413-025-001, Alt. 1 or latest, Qty-01 No/Set. (2) Locking plate for Housing Ring to CLW Drg. No. 1209-01.413-025-002, Alt. 1 or latest Qty-01 No/Set.
Hose clamp band type, Size: 1 inch, Material: MS with GI coating As per IS: 4762 : 2002
Cock valve-1- 1/4 inch to EMD pt no.8431621. AND BLW PT NO 17390023, EMD DRG. NO. 8431621 Alt.-Ga as per Specn. EMD-8431621.
SET OF HOSE ASSEMBLY COMPLETE [INCLUDING FIXTURES] FOR CONSERVATOR TO TRANSFORMER AND CONSERVATOR TO CONSERVATOR AS PER CLW Drg.No. CLW/ES/3/SK- 2/0456, Alt - J or latest [SI. No.1 and SI. No.2]. Each set Consisling of: [1] Item SI. No.01 - 02 Nos/set.[2] ltem SI. No. 2 - 01 No/set.
OIL SEPARATOR ASM as per Drg. No. 9537348 ALT Ah, specn: PURCHASE SPECN No. DLW/DES/MISC-335, REV-R1
Digital Wheel Distance Measuring Gauge Model No. WG-1(E) (Spring Loaded Type) for BG loco wheel with LCD display along with spirit level, 1.5V button cell and NABL calibration certificate to be supplied in storing box with carrying handle. Technical Specification: (1) Range: 1585-1615mm, (2) Digital Display least count: 0.01mm and Mechanical Display least count: 0.1mm, (3) Display: Double display system (Combination of analog and digital display with adjustable points). Note: The gauge will be used for taking wheel to wheel distance measurement in loco position. MAKE: JYOTI ENTERPRISES
KNIFE SWITCH (BATTERY) SWITCH PANNEL ASSEMBELY TO EMD PT. NO. 10634101. BLWPT.NO.18000150, BLW DRG NO.10634101 ALT -B OR LATEST FOR WDG4/4D DIESEL LOCOMOTIVES.
O ring between flanges suitable for schneider Vacuum Circuit Breaker (single bottle) type 22CB VCB as per schneider Part No. NPRM5510390.
Cap screw hex head size 1 Inch - 8 TPI x 4 Inches long, DLW drg 2P11369 - 128.
Safety Plate for Gear Case Gauge Glass as per ECOR Drawing No. ELS/VSKP/2018/43.
Set of (a) Male coupling and (b) Female coupling. Specn/Drg No-ABB ID No. ( a) HSTN 422023P0013 (b) HSTN 422023P0003, CLW Specn no- CLW/ES/03/0456 Alt-K or latest and CLW Drg. No- CLW/ES/3/SK-4/0456 Alt-C or latest.
Elbow for sand trap connection size: 1/4" NPT X 1/2" cone and nut , Material : SS , Grade : 304. Sample to be approved before bulk supply
Straight union for sand trap connection size: 1/4" NPT X 1/2" cone and nut , Material : SS, Grade: 304
RUBBER BUSH FOR FDU OF WAG9 LOCOS AS PER DRG NO. DLS/VSKP/2024/16.
Normal Single crystal Probe, 2.5 MHz, 20 mm dia MAKE: MODSONIC
Change over switch 2 way 40 Amp with 4 pole to model No. DHMCOFPE040 of L and T make or similar
Dial snap gauge with digital dial gauge, Least count 0.001 mm. One set consist of six no. of items. Measuring range (1) 100-125 mm. (2) 125-150 mm. (3) . 150-175 mm. (4) . 175-200 mm. (5) . 200-225mm. (6) 225-250 mm. Make: MITUTOYO or PRECISION GERMANY or FORBES or Fully Equivalent.
WHEEL MEASURING GUAGE, MODEL-TWG-1 (BGL) FOR MEASURING THE FOLLOWING WHEEL PROFILE PARAMETERS OF THE BG LOCOS:(1) FLANGE WEAR, (2)ROOT WEAR, (3)THREAD WEAR, (4) WHEEL DIA,(5) TYRE THICKNESS, (6) FLATNESS ETC. AS PER RDSO DRG NO. SKDL-3592, ALT 06 or latest. MATERIALSTAINLESS STEEL MEASURING TIP WITH CALIBRATION CERTIFICATE
AC CIRCUIT BREAKER 63A [TYPE-17] , CLW'S SPECN. No. CLW/ES/3/0096, Alt-L or latest (CLW vendor ID: 2100535)
Fan blade for condenser motor, suitable for WAG9 Locos KKI/SIDWAL/INTEC make Cab AC units. Shaft hole dia 12.7 mm +/- 0.1 mm as per RDSO spec no. RDSO/2007/EL/SPEC/0055 (rev 02) or latest.
SET OF BRAKE HANGER PIN SAFETY CLAMPS SET OF CONSISTS OF TWO ITEMS AS PER ECoR DRAWING NO DLS/VSKP/EL/2021-21, alt-1, set as 1) ITEM NO 3 QTY. 01 NO./SET, 2) ITEM NO 4 QTY. 01 NO./SET
ROTARY SWITCH CONFIGURATION TO CLW SPEC. NO. CLW/ES/3/0068/C OR LATEST
C3W distributor valve as per FTRTIPL Pt. No. 501007100 for E-70 Brake system in three phase WAG9HC electrical Locomotives.
End cap as per CLW Drawing No. 1209.01.311.014 (Alt-1) for Axle box of WAG9 locomotives.
NYLON TUBEs for WAG-9HC as per Specn. No. CLW/MS/3/079 ALT-5 or latest (As per set details attached)
Retainer to DLW Part No.16240662 and EMD Part No. 8174209 Alt "Nil" or Latest.
MF1 - A(VCU) for BHEL propulsion system based WAG9HC Locos as per BHEL material code:- ED69240MF1AA.
Spares for Modified Sand pipe Assembly for 3 Phase Locomotives. Set consists of two items of Sander nozzle as per Drg. No. C/ELS/LGD/Bogie/4/158. as. i) Sander Nozzle (thread pitch 1.5 mm) Ref.1-01 No./set. ii) Sander Nozzle (thread pitch 2.5 mm) Ref.2-01 No./set. ONE SET OF SAMPLE TO BE APPROVED BEFORE BULK SUPPLY.
Sine wave Filter Capacitor for BHEL propulsion system WAG9HC Locos as per BHEL material code TI0668103604.
CONTACTOR, 3P, 225AMP for BHEL propulsion system based WAG9HC Locos as per BHEL material code: TI0668104210.
DC AXIAL FAN for BHEL propulsion system based WAG9HC Locos as per BHEL material code TI0668103310.
Bushes for Brake Rigging for the use of WDG4 diesel locomotives, Set consisting of 13 items as per annexure attached.
Set of 09 child items of E70 of Air brake System for WAG9 locos, as per annexure attached.
Probe Cabel, BNC to BNC Cord connector between UST Probe and Ultrasonic Flaw Detector ( 2 Meter Long) Make: Modsonic
Piston Seal suitable for schneider Vacuum Circuit Breaker (single bottle) type 22CB VCB as per schneider Part No. NPRM5540023.
Normal Single crystal Probe, 2.5 MHz, 20 mm dia MAKE: MODSONIC
SET OF ITEMS, SET CONSISTS OF 11 ITEMS AS PER ANNEXURE - "A" ATTACHED
Holder for fluorescent Tube Light (Philips type), size: 29 x 32 x 13 mm, high heat resistance, copper core connector, standard IS5437/IS2418