Loading
Loading…
Loading…
16 results • Latest
ALKALINE AA BATTERY USED IN WALL CLOCKS [ALKALINE AA BATTERY USED IN WALL CLOCKS AND REMOTES IS A NON-RECHARGEABLE 1.5 V PRIMARY CELL (IEC LR6) WITH ZINC-MANGANESE DIOXIDE CHEMISTRY, MEASURING ABOUT 50.5 MM IN LENGTH AND 14.5 MM IN DIAMETER. MAKE;PANASONIC/DURACELL/EVEREADY/NIPPO ONLY. Note:- Manufacturing date should not be older by more than three months from the date of supply.] BATTERY CELL 9 VOLT ALKALINE CELL, SIZE [BATTERY CELL 9 VOLT ALKALINE CELL, SIZE 6LR61, MADE WITH ALKALINE ZINC MANGANESE DIOXIDE AND CONTAINING NO ADDED MERCURY OR CADMIUM, FEATURING A METAL-JACKET SNAP TERMINAL. MAKE;PANASONIC/DURACELL/EVEREADY/NIPPO ONLY Note:- Manufacturing date should not be older by more than three months from the date of supply]
Conical rubber thrust pad for axle box t [Conical rubber thrust pad for axle box to RDSO drg.no SKDL 2308 Alt-01 & SKDL 2309 Alt-Nil and conforming to specfication IRS R63-76]
DETERGENT BAR 250 GMS TO BRAND RIN/HENK [DETERGENT BAR 250 GMS TO BRAND RIN/HENKO/TIDE AS IN ORIGINAL PACKING]
Window Tinting/Insulation film Sparkling [Window Tinting/Insulation film Sparkling blue. WTF-01 2MILI, VLT-77%, IRR-11%, UVR-76%. Roll size: 1.38M x 30Mtr Make/Model: Creative Tools WTF- 01 (or) Medha (or) volvo (or) equivalent.]
FINE QUALITY INDUSTRIAL GRADE WHITE 100% [FINE QUALITY INDUSTRIAL GRADE WHITE 100% COTTON FABRIC MATERIAL OF DIMENSION 300mm X 300mm. FOR THE PURPOSE OF FINE WIPING OFF DUST, MUCK AND ABSORPTION OF RESIDUAL PARTICLES ON PNEUMATIC AND SMGR COMPONENTS OF CONVENTIONAL LOCOMOTIVES. THE MATERIAL SHOULD BE SKIN FRIENDLY AND FREE FROM WRINKLES AND LINT WITH MOISTURE ABSORPTION QUALITY. IT SHOULD BE BIO DEGRADABLE AND RECYCLABLE AND BLEACHED WITH NON TOXIC CHEMICAL TO PREVENT ADVERSE ENVIRONMENTAL IMPACT AFTER DISPOSAL.
1-1/4 (One and One by Four) inch Isolating Cock with Vent [Ball Type ] for Conventional Locomotives as per CLWs Drg. No. 0/2/65/364, Alt.7, [ Ref. Item No. 9] to STR No. CLW/2021/ELDO/M/STR/121 Rev 0.
Auxiliary capacitor assembly for Arno an [Auxiliary capacitor assembly for Arno and MCP stator winding asper CLW Specn. No. CLW/ES/C-48 Alt-B and CLW Drg. No. CLW/ES/SK-2/C-48 (Make of capacitor/ICAR/Italy or GE/USA/EQUIVALENT as per specn.)]
GALVANISED MILD STEEL TUBES ELECTRICAL RESISTANCE WELDED (ERW)/HIGH FREQUENCY INDUCTION WELDED (HFIW)/HOT FINISHED WELDED (HFW) CONFORMING TO IS.1239 (PART 1) /1990 (FIFTH REV) WITH AMDT. NO. 1 TO 5. SCREWED AT BOTH ENDS AS PER IS.554/1985 SOCKETED AT ONE END AND OTHER END PROTECTED WITH PLASTIC THREAD PROTECTOR.THE SOCKET CONFORMING TO IS.1239(PART-II)/1992 (FOURTH REV) WITH AMDT NO.1 IN RANDOM LENGTH OF 4 TO 7 MTRS. G.I PIPE SHALL BE DULY ISI MARKED AS PER STATUTORY REQUIREMENT NOMINAL BORE DIA IS 40mm MEDIUM GRADE. IS 1239-68 PART I
Overhauling kit for modified breather as [Overhauling kit for modified breather assembly for TFP as per RDSO Drg.No.SKEL-4895 (Rev-0) consisting of following Items. 1) Item Sl.No.6, Gasket neoprene, Qty - 01 No. 2) Item Sl.No.7, Gasket neoprene, Qty-02 Nos. 3) Item Sl.No.25, Gasket cork sheet, 6mm thickness x 130mm dia - Qty - 01 No. 4) Item Sl.No.27 O ring small, Qty -02 Nos. 5) Item Sl.No.28 O ring large, Qty - 02 Nos. (Total 05 Items and 08 Nos/set)]
Steady Link with mouth piece for AM-12 P [Steady Link with mouth piece for AM- 12 Pantograph to M/s.SIL Old Part No SOOO290/SIL New Part No.S0221112001 or to M/s.Contransys Part No CO15310 or to M/s. General Stores Drg.No.GSEC/PANTO/024.]
Enamel, Interior, Finishing Smoke Grey [Enamel, Interior, Finishing Smoke Grey to ISC - 692 of IS;5 /2007 (RA 2022) with Phthalic Anhydride Content 15% Minimum to Spec. IS:133/2013 (Pt.1) RA 2018 Amdt.No. 1 of July 2015 or Latest , ICF/MD/Spec-052 Issue Status.02, Rev.01. Packing Condition:- Packed in 20 Litres New, Sound and Non-Returnable M.S. Drums to IS:2552/89 ( RA - 2018) with Amdt. No.1 Gr.B2 or Latest.]
DETERGENT BAR 250 GMS TO BRAND RIN/HENK [DETERGENT BAR 250 GMS TO BRAND RIN/HENKO/TIDE AS IN ORIGINAL PACKING]
Conical rubber thrust pad for axle box t [Conical rubber thrust pad for axle box to RDSO drg.no SKDL 2308 Alt-01 & SKDL 2309 Alt-Nil and conforming to specfication IRS R63-76]
SET OF STRAINERS CONSISTING OF 02 ITEMS, (1)STRAINER TO WABCO PART NO. 527583 AND TO FTIL PART NO. 508 4070 00 OR SIL PART NO. 30077401, QTY/SET- 09 NOS/SET, (2) THIMBLE TYPE STRAINER TO WABCO CAT NO. 526835 AND TO FTIL PART NO. 502 1160 00 OR SIL PART NO. 30071341, QTY/SET- 3 NOS/SET.
GREASE FOR APPLICATION ON AXLE BOX CYLINDRICAL ROLLER BEARING OF ALCO DIESEL LOCOS: SERVOGEM RR-3 (IOC) BALMEROL MULTI-GREASE %u2018LL-3%u2019 (BL & CO.)/ MAK RR GREASE-3 (BPC)/LITHON-RR3 (HPC) CONFORMING TO RDSO SPECIFICATION NO.WD-17-MISC-92.
SET OF STRAINERS CONSISTING OF 02 ITEMS, (1)STRAINER TO WABCO PART NO. 527583 AND TO FTIL PART NO. 508 4070 00 OR SIL PART NO. 30077401, QTY/SET- 09 NOS/SET, (2) THIMBLE TYPE STRAINER TO WABCO CAT NO. 526835 AND TO FTIL PART NO. 502 1160 00 OR SIL PART NO. 30071341, QTY/SET- 3 NOS/SET.