Loading
Loading…
Loading…
107 results • Latest
SAND HOSE PIPE CONNECTION FOR WAG-9 LOCO SIZE 3/8" AS PER DRG. NO. NGP/TRS/3/13.227 REV-3 ITEM SR.NO.-07.
RUBBER GASKET CURVE TYPE FOR HOOD BRACKET ROOF AS PER DRAWING NO. WR-DHD-EL/4-GK-16.
Slack Adjuster assembly [upper] to Drg. No. SKVL-189, Alt-1 & SKVL 190, Alt-1 with bushes alone
RESERVOIR FOR WAG-9 Loco ( Consisting of 02 items),
Guide plate to ELGI part no. 070400280 for ELGI make RR20100CGM compressor.
Overhauling kit for Vent Valve for EBV of WAG9 Electric loco CCB system as per KBIL Part No. XKI/KIT/02581.
(1) SUCTION VALVE SPRING TO ELGI PART. NO. 000424350. (2) Breather valve(Diaphragm) of M/s. ELGI Part No. 000510060.
150 mm Bulk Water meter Woltman Type, Calss B, Caste Iron casing
Bulk Water Meter 100 mm for cold water Woltman/Vane wheel type, class B, Caste Iron casing
Retro reflective sticker (Heavy strength gum) with cutting, Consisting 04 types of sticker in one set
Sight Glass for Tap changer as per REPL part no. S1306.3 or Anantashree Part no. G1306.3a.
Steel wire Brush (Scrubber) for floor cleaning as per attached Data sheet and Sketch.
Bio Degradable Grease Grade- NLGI 000 for SLVMR make Wheel flange Lubrication system.
REPAIR KIT OF 3/8" BALL TYPE CUT OUT COCK, CONSISTING OF 04 ITEMS:
SEALING PLATE GASKET FOR COVER ASSY. AS PER DRG.NO. 1209-01-411-038 FOR 3-PHASE LOCOS.
(1) Yoke Supporter plate to Drawing no. SKDL-890 Item ref -1. (2) Yoke Supporter plate to Drawing no. SKDL-890 Item ref -1.
LP connecting rod Needle Roller Bearing , RNA 304230 for ELGI RR20100CGM to ELGI part no. 000903706.
Modified locking arrangement for window glass shutter of Electric loco
Set of Gasket for TMB of 3 phase Loco. Set consisting of 02 items 1)
Compressor Safety Valve as per KBIL Part No. I79965/2115
Spray type specialty lubricant with blended hydrocarbon solvent for moisture displacement,
Set of spares of Panesar PEL 1000 compressor consisting 08 items.
INDUSTRIAL DISSOLVED ACETYLENE GAS TO IS 308/1988 (III REVISION) WITH AMENDMENT NO.1 SPECN IS 308.
LED CAB LIGHT FOR WAG 9/ WAP 7/ WAP 5 Spec: RDSO/PE/SPEC/TL/0091-2016
Flexible Connection for HRPT as per M/s FTRTIPL part no. VE038875-106.
COMPRESSOR SAFETY VALVE 3/4 INCH BSP AS PER M/S FTRTIPL PART NO 024001000 FOR E-70 BRAKE SYSTEM OF THREE- PHASE LOCOMOTIVES.
SET OF BOLT HEX HEAD M28 x 114 WITH CASTLE NUT M24, SPLIT PIN & MACHINED WASHER
Shim for elastic ring for 3 Phase loco, Size OD: 158 mm, ID: 92 mm, Thickness: 2 mm, 06 numbers holes of dia. 14 mm
Tray for collecting compound as per Drg no. TRS/ACL/SK-251.
Bolt Assembly M24x130 for horn stay of WAP4 Loco, consisting 05 items in one set
Packing plate for side buffer Assly as per drawing No-1209-02. 441-117.
SET OF HARDWARE FOR SECONDARY SUSPENSION FOR WAG-9 LOCO
Set of cable terminal / sleeves for thin walled elastomeric Electron beam irradiated cable
Special hex head Bolt with Nut for holding Sandwitch mounting assembly, as per drawing no. A3/2012/CNB/2427/5045/BT, Alt A.
Overhauling Kit for Pressure Reducing valve, FP-PRV (II77479/060A) as per KBIL Part no: XKI/KIT/01588 for CCB brake system.
Set of spares of Panesar PEL 1000 compressor consisting 08 items.
Overhauling Kit for AC filter ( Moisture Drain Arrangement, Aux) II56242 to KBI part No. XKI/KIT/03585 of CCB Brake System.
Horn & axle box face liner, Thickness of liner required: 5 +/- 0.25 mm, remaining dimension and material specification as per RDSO Drg. No. SKVL 058 .
Heavy Duty Axle Journal FRP Protection Cap for WAG9HC Locomotive motorised wheel set Axle journal protection as Per Drawing no. 000A4775.
Earthing shunt TM to Loco Body of WAG9HC locomotive with Set of Hex head Bolts
Side Buffer packing plate (taper) as per Drawing no. 01/163 Alt2 Part B only.
Inter lock washer of size M20 for Traction link and Pivot housing bolts
Gasket for 1/2" Air Stainer type T, Gasket OD: 46.25 mm , ID :40.6 mm, Thickness: 3 mm + 0.05, -0.00, as per drawing no. 0/2/65/440, Ref. No. 07.
SET OF HEX HEAD BOLT GRADE 8.8 AS PER IS: 1364/PART I/2002. I). HEX HEAD BOLT M24X100MM.
Set of Fuses for Electric locomotive as per detail Annexure attached.
Horn & axle box face liner, Thickness of liner required: 5 +/- 0.25 mm, remaining dimension and material specification as per RDSO Drg. No. SKVL 058 .
LED CAB LIGHT FOR WAG 9/ WAP 7/ WAP 5 Spec: RDSO/PE/SPEC/TL/0091-2016
Pipe Bracket suitable for 6mm copper pipe, DLW part no. 11664204 and drawing no. TPL- 9869.