Loading
Loading…
Loading…
45 results • Latest
Set of wear plates(Nylon 66 Liner) along with rivet CS head for guide assembly to WAP-4 locos as per Sr DEE/RS/CNB Drg. No. A3/2004/CNB/1913/5031/BG, Ref nos. 05, 06 & 07. Set consisting of (1) Ref no. 05. Qty = 01 No. (2) Ref no. 06. Qty = 01 No. (3) Ref no. 07. Qty = 08 Nos.
SET OF THREAD TYPE MALE & FEMALE CONNECTOR FOR WOODWARD GOVERNOR OF HHP LOCO. AS PER RDSO MP.IB.EC.01.07.15 (REVOO) DT. 22/12/15 MALE CONNECTOR TO BE SUPPLIED WITH ABRATION RESISTANCE PTFE CABLE OF 455 MM POTTED WITH ANABOND 909 OR SIMILAR TO AVOID INGRESS MALE CONNECTOR PART NO.- AEC3102R 20L-014P SP2C30 AND FEMALE CONNECTOR PART NO.- AEC 3108E 20L-0145 SP2 C30TB OF ALLIED ELECTRONIC CORPORATION of ITT ALLIED or Amphenol make.
HYDRAULIC BEARING PULLER, CAPACITY- 5 TON, 3 LEGS.
ENVIRONMENT FRIENDLY BIO DEGRADABLE COOLING WATER CORROSION INHIBITOR FOR ALCO DIESAL LOCOMOTIVE HP-POWER KOOL RR OF M/S HPCL CONFORMING TO PRODUCT IDENTIFICATION DATA OF MP MISC-184 [DEC-2006] [REV-0.00]
TOH Kit for FTRTIPL make LX3600 type High Reach Pantograph HRPV2 MUM as per FTRTIPL Part No. E043116-K08.
Alerter buzzer to medha pt.no.SP696131057 of HHP Locomotives.
HP piston for Knorr-Bremse compressor of WAP4 locomotives to KBI part No: 8.181.0.160.013.7.
Auto Flasher Relay for 3 Phase Locomotives, as Per CLW Specification No. CLW/ES/3/0481 or latest. , Relay type DP-30 FC-2C-24VDC, coil voltage -24VDC, coil resistance 350 +-10% ohms, contact capacity 25A, 250VAC (for QFL).
1) KA-FILTER REGULATOR , PART NO-MC.202.D00 , MAKE-JSC KALUGAPUTMASH. 2) KA-VOLTMETER(SERVO CONTROL) , PART NO-MV2300. 15.015 SUB M42300.44 15- 0-15 B-1.5G , MAKE-JSC KALUGAPUTMASH.
Kit for PVLT Breather Port of 20-CP and 16-CP as per KBI No:- XKI/KIT/03569. One set consisting of 07 items. Item detail as per Annexure attached.
Industrial and Natural protector skin care paste
STRAINER ASSEMBLY FUEL OIL SUCTION EMD PART NO:8341983 as per Drg.No. EMD PART NO:8341983 specn: EMD PART NO:8341983.
Digital bore gauge of measuring range :50 -150 mm with digital ABS dial gauge indicator ,least count : 0.001 mm, Accuracy ; 0.003 mm with calibration certificate from NABL accredited lab.Make/Brand :MITUTOYO/BAKER/INSIZE or similar. Suitable carrying case for each bore gauge is to be provided.
SET OF THREAD TYPE MALE & FEMALE CONNECTOR FOR WOODWARD GOVERNOR OF HHP LOCO. AS PER RDSO MP.IB.EC.01.07.15 (REVOO) DT. 22/12/15 MALE CONNECTOR TO BE SUPPLIED WITH ABRATION RESISTANCE PTFE CABLE OF 455 MM POTTED WITH ANABOND 909 OR SIMILAR TO AVOID INGRESS MALE CONNECTOR PART NO.- AEC3102R 20L-014P SP2C30 AND FEMALE CONNECTOR PART NO.- AEC 3108E 20L-0145 SP2 C30TB OF ALLIED ELECTRONIC CORPORATION of ITT ALLIED or Amphenol make.
4 PORT ROUTER AS PER RDSO SPECIFICATION: RDSO/SPN/TC/84/2008, REV.0 WITH ACCESSORIES AS: 2 ON BOARD GE,4 PORT SERIAL WAN INTERFACE CARD, 2E HWIC SLOTS, 1 ISM SLOTS, 256 MB CF DEFAULT, 512MB RAM, IP BASE, 2 NOS.V35 CABLE, DTE MAKE TO SMART SERIAL 10 FEET LENGTHWITH REQUIRED CABLE & CONNECTION. Make: TECHROUTE/TSR-2900-20 ROUTER+ 2x HIC- 2TB Make:- CISCO MODEL No. ISR 4221/K9 WITH AL or Similar.
BEARING 6314 RS14 RS2Z/C4 S1 VT228 (MAKE OF SKF/NBC/FAG WITH ORIGINAL MANUFACTURER CERTIFICATE) FOR RADIATOR FAN OF HHP LOCOS(DLW PT.NO.18490037).
Coupler connecter 24 pin, Han E type connecter with silver plated crimped terminals with suitable pin as per cable size make Hypertac or equivalent, conf. to RDSO Specification no. RDSO/PE/SPEC/AC/AC 0061-2005 rev-1 vide SI No. 27.
CABLE LUG 4.0-6.0/M6 CUVZN AS PER CLW Spec. no. CLW/ES/3/0130 Alt-N or Latest AND ABB Identification NO. 3EHP470026P0106.
Set of Gasket and O ring one set consists of 13 item as per following details : (1) Gasket for thermostat valve DLW Pt No.16171172 Drg No.40034621, Qty. = 2 Nos(2)Gasket soak back filter to flange edge molded DLW Pt No.16170787 40034622 Qty. = 5 Nos.(3)Gasket 2 flange (For compressor HP Pipe) DLW Pt No.17270108 Drg No. 8255258, Qty. = 8 Nos.(4)Gasket soak back pump tube flange to oil pan DLW Pt No.16170842 Drg No. 40034624 , Qty. = 1 Nos.(5)Seal O ring cut off valve & flange mounting DLW Pt No.16171214 Drg No.8342588 , Qty. = 14 Nos. (6)Seal O ring DLW Pt No.16171135 EMD pt no.10660839 , Qty. = 1 Nos.(7)Seal O ring DLW Pt No.16171147 Drg No.8282233 , Qty. = 2 Nos.(8) Gasket governor drive mounting DLW Pt No.16170283 Drg No.40040024 , Qty. = 1 Nos.(9) Gasket Detention mounting edge molded DLW Pt No.16171202 Drg No. 40040017 , Qty. = 2 Nos.(10) Gasket 3/4 flange DLW Pt No.17271010 EMD pt no. 8057487 , Qty. = 2 Nos. (11) Bowl glass gasket DLW Pt No.16170684 EMD pt no. 8104055 , Qty. = 2 Nos.(12) Gasket water tank outlet DLW Pt No.17270984 EMD Pt no. 9570720 , Qty. = 2 Nos. (13) Gasket lube oil cooler to water pipe DLW Pt No. 17270972 EMD Pt no. 9570679 , Qty. = 4 Nos.
SET OF DOOR LATCH ASSEMBLY 1) LEFT SIDE DOOR LATCH EMD DRG NO.8425277 ALT. DA & BLW PART NO. 17450652-01 NO. 2) RIGHT SIDE DOOR LATCH EMD DRG NO. 8425276 ALT. DA & BLW PART NO. 17453010-01 NO.
Set of Stainless Steel Pipe Fittings as per CLW Specification No. CLW/MS/3/053 ALT. 21 required for WAG-9 loco sander, as per annexure attached. Material to be procured from CLW approved source CLW item id no. 2100097. One set consists of 5 items, 8 Nos as per annexure attached
STRAINER ASSEMBLY FUEL OIL SUCTION EMD PART NO:8341983 as per Drg.No. EMD PART NO:8341983 specn: EMD PART NO:8341983.
Set of ferrule & insert, the set cosists of 02 items- (1) set of double ferrules (front & back ) suitable for 6mm OD Nylon tube as per CLW spec No. CLW/TS/99/CF/5 Alt-8 or Latest -1 set, (2) insert 6mm OD as per CLW spec No. CLW/TS/99/CF/5 Alt-8 or Latest -1 No./set.
WALL MOUNTED STAINLESS STEEL BODY DISTILLATION PLANT CAPACITY -06 Ltr, PERHOUR, HEATING CAP - 6 KW (03 HEATERS OF 02 KW CAP.) OUTPUT OF WATER 06 Ltr. PER HOUR, LOW WATER CUT OFF FACILITY IN CASE OF SHORTAGE OF WATER POWER 230 VOLTS +/- 10%SINGLE PHASE SUPPLIES WITH 05 METER LOAD HEAVY DUTY CABLE WITH PLUG. MAKE/BRANDCHENKEM, SCIENCE TECH, ADITYA OR SIMILAR.
AC/DC Clamp meter 2000 A similar to Model No.: CM4373 of Hioki make equivalent to Acceptable/Preferred Brands: - HIOKI / FLUKE/ MOTWANE. NOTE: 1. Copies of test Reports/certificates and other certifications to be furnished to buyer on demand at time of supplies. 2. Availability of test report from central Govt/NABL/ILAC accredited lab covering all parameters.
Center fixing bolt Assly for line contactor as per attached drawing No. DQ/SL/10/15/005.
Terminal Lug Small Bent Type TO EMD PT NO, 8208857, BLW P/NO: 18340222.
FLEXIBLE CONDUIT PIPE OUTER DIA 28.5MM AND NW 23MM.
Set of wear plates(Nylon 66 Liner) along with rivet CS head for guide assembly to WAP-4 locos as per Sr DEE/RS/CNB Drg. No. A3/2004/CNB/1913/5031/BG, Ref nos. 05, 06 & 07. Set consisting of (1) Ref no. 05. Qty = 01 No. (2) Ref no. 06. Qty = 01 No. (3) Ref no. 07. Qty = 08 Nos.
Intermediate Overhauling (IOH) Replacement kit for Single Bottle VCB of M/s. Schneider Electric, type 22 CB as per Part No.-MFR38246. [Ref.-CLW's Letter No. -LDD/3229(VCB)of Dt.14.03.2024].
Traction Motor Blower including Motor and duct for WAG-9 locomotives as per CLW Specification No. (i) CLW/ES/3/0019 Alt-G or latest & (ii) RDSO Specification No. E-10/3/09 or latest (motor) with amendment no.-1 to 6 or latest.
Felt Ring for EP Contactor as per CLW Drg No.4TWD.111.074 ALT.6
Set of Head Screw for Knorr Bremse Compressor of WAP-4 Locomotives. One set consists of 02 items as per following details: (a) Head Screw M10x75 as per KBI Part No. 470095, Qty. 01 No. (b) Head Screw M8x50 as per KBI Part No. 477000, Qty. 01 No.
1. COPPER PIPE 1/2" FOR SPLIT AC. 2. COPPER PIPE 1/4" FOR SPLIT AC. 3. NYLON BRAIDED HOSE PIPE SIZE 3/5" FOR AC OUTLET DRAIN WATER,MAKE- buildskill, nipram, Atorse or similar.
Set of spare item one set consist of 03 item as per following details : 1)ELBOW -1/4 BULK HEAD -BRASS TO EMD PART NO.8160443 & NUT -HEX JAM 7/16-20 Qty. 65 Nos. 2) NUT Hex lock 5/16-18 EMD Part No. 8032716 and DLW PL No. 19355245 Qty.260 Nos. 3) LOCK NUT 7/16-20 EMD PT.NO.9335010 & DLW PT.NO.19355257 Qty.260 Nos.
SUMMERSABLE TULLU PUMP SINGLE PHASE 220 V, 50 HZ 1 PH. 18 W 2800 RPM MAX. LIFTING HEIGHT 1.65 M FOR DESERT COOLER.
CERTIFIED REFERENCE MATERIAL 1.Low alloy steel (Turning form) CRM No. 223.6A, 2. Brass 60-40 (Turning form) CRM No. 241 as per annexure-I
Shut down rod for WW. governor to WW pt.no. 362391 and ref.no. 36703.284.
EARTHING BRUSH ASSLY. FOR HITACHI TR. MOTOR TYPE HS-15250A OF LOCOS AS PER CLW DRG. NO.3TWD.095.106.
1) O ring HP cylinder for Knorr-Bremse compressor of WAP4 locomotives to KBI Part No: ORC1180000. 2) O ring LP cylinder for Knorr-Bremse compressor of WAP4 locomotives to KBI Part No: 469057. 3) O ring HP valve for Knorr-Bremse compressor of WAP4 locomotives to KBI Part No: C160077/10. 4) O ring LP valve for Knorr- Bremse compressor of WAP4 locomotives to KBI Part No: C160077/5.
PIPE ASM as per Drg.No. 9568632, BLW Pt No. 17050649, ALT A. SPECIFICATION FOR CLEANING,SURFACE/ RUST PREVENTIVE.
ISOLATING COC TO KBI PART NO. II107853 FOR WAG9 LOCOMOTIVES.
RUBBER KIT FOR SDW-1 RELAY VALVE OF M/S. S.D.TECHNICALS. ONE SET CONSISTING OF 10 ITEMS AS FOLLOWING: [1] O RING TO S.D PART NO. J-72070/23 or EQUIVALENT - 01 NO. [2] WASHER TO S.D PART NO. A-73211/402 or EQUIVALENT - 01 NO. [3] SPRING TO S.D PART No. A-87822/248 -01 NO. [4] O RING TO S.D PART No. J-72070/18 or EQUIVALENT- 01 NO. [5] INLET EXHAUST VALVE TO S.D PART No. J-74840/1 or EQUIVALENT - 01 NO. [6] O RING TO S.D PART No. J-72059/12 or EQUIVALENT - 01 NO. [7] VALVE SEAT TO S.D PART No. SD-9005/02 or EQUIVALENT - 01 NO. [8] DIAPHRAM TO S.D PART No. SD9005/04 or EQUIVALENT - 01 NO. [9] WASHER TO S.D PART No. A-70115/60 or EQUIVALENT -04 NO. [10] RUBBER FLAP TO S.D PART NO. 9005/08 or EQUIVALENT - 01 NO
Kit inlet valve for ELGI make RR20100CG(M) compressor as per ELGi part No. 072403729. Annexure attached.