ECSD/MOULALI/SOUTH CENTRAL RLY Tender Results

Push Button Actuator RED for Emergency OFF for Driver Desk suitable for 3 phase MEMU rake as per MEDHA part no SP675UM401053 or equivalent conforming to RDSO Spec.No.RDSO/PE/SPEC/EMU/0096-2008 (Rev.4) DEC 2009 with ICF Annexure No.ICF/EMU/0096-01(Rev.02).

Ni-Cr test 3 types of panel as 1)Ni-Cr Panel sizes- 20 Micron, Crack Depth 20 Micron and width 1.0 Micron Approx.2) Ni-Cr Panel sizes- 30 Micron, Crack Depth 30 Micron and width 1.5 Micron Approx.3) Ni-Cr Panel sizes- 50Micron, Crack Depth 50 Micron and width 2.0 Micron Approx. 01 Pair per set each for sensitivity check of Dye penetrant/Fluorescent Dye penetrant test with manufacturer certificates and reference crack detection photograph.

SUPPLY and INSTALLATION OF DIGITAL PH METER.TECHNICAL SPECIFICATION AS PER ANNEXURE Make: LABMAN OR EQUIVALENT

Form A 30mm coil 110V DC 6,8w Part No. P2FCA472 of parker make for schunk make pantograph operating valves of VB, 3 Phase EMU/MEMU rakes. Make: Parker or equivalent to suitable for VB, 3 phase EMU/MEMU pantograph.

Supply and installation of Penetrometer as per ASTMD 937,ASTMD 217,IS:1448 with gear arrangement for moving arm and calibration certificate and as per following specification 1) Unit should have accurately machined aluminium bar with grooved table surface .2) Stainless steel supporter guide rod perpendicular to the base for rigidity.3)Dust proof 5"Dia (approx.) indicator dial graduated into 400 division of 0.1mm penetration and zero reset to eliminate error.4)Hollow 90 degree brass cone with highly polished stainless steel tip, removable nut & stem of approx. 100grm weight.5) control time accuracy +/- 0.1 second .6) with one extra needle.7) Brass cups each one number of 50 gm and 100gm. As per attached specification No ASTMD 937, ASTMD 217, IS:1448 (P-60)/ 1994 or Latest Make: Pranav Industrial Corporation Ltd. Thane. Or equivalent

Set of crimp contacts consisting of 1) Han E M crimp contact Ag 2.5 mm2 /14 AWG having harting part no.09330006102 or similar-1no. and 2) Han E F crimp contact Ag 2.5 mm2/14 AWG having Harting part no.09330006202 or similar-01no.

Grease for traction motor bearings and Axle suspension tube bearings of 3 phase BHEL propelled MEMU rakes. Cyprina RA grease of M/s.Shell india markets pvt. Ltd./ servoplex TMS of M/s. IOCL or equivalent.

Set of forms (Schedule & Testing) for EMU, MEMU & VB as per Annexure-A. Specification: Printing required on 60 GSM paper quality. Size: A4, Black print content as per soft copy provided at time of purchase order.

Speed sensor with all end connectors fitted in ready to use condition for BHEL 3-phase TM IM 3302AZ as per M/s. BHEL material description: Dual channel hall effect speed sensor with cable, connector & mating connector as per BHEL material cod: TI0668127689 Make:BHEL.

Set of Harting Crimping Module for ECC connector consisting of 1) Han EE 46 pos. Male Crimp Insert with Haring part No. 09320463001-01No & 2) Han EE 46 pos. Female Crimp Insert with Harting Part No.09320463101-01No. Make Harting only.

Set of items for ELGI make Main Compressor type RR 10070 OF consisting of 3 items.1. Ring over lap dia 85 TS10/15OF Part No. B016806960003-4nos.,2. Ring gas tight dia110 TS10 OF Part No.B016806960007-2nos.,3. Breather valve assy Part No.A020030-1no.

KIT GASKET 2YEARS RR10 100 OF ELGI part no 072496869 consisting of 09 items for ELGI make main compressor.

Set of spares for Alarm unit (Set details attached) Note:1) Sample should be produced before bulk supply.

Set of Toilet items for MEMU rakes as per ISI stand 1879 and 1239 (Set details attached). Note: 1) Sample should be produced before bulk supply.

Supply and erection and commissioning of Laptop charging timers, I/P 100V AC/DC to 230V AC/DC and O/P power 100W with adjustable timer operation.