Loading
Loading…
Loading…
31 results • Latest
Set of sander nozzle of sand pipe assembly for 3 phase loco as per drawing No. ELS/VSKP/2025/22. Each set consisting of item No. 1-01No./set (2) Item No.2- 01No./set
MSU Grease Nipple for WAP-7/WAG-9 Locomotives as per ELS/Royapuram/S.Rly.Drg.No.M/ELS/RPM/SK-174
Set of items for Gas extraction unit for dissolved gas analysis. Set consists of 6items: 1).PGC oil sample preparation shaker (Model: Shaker-PGC-1330RJ) qty-1 per 1EC EN 60557. 2). Gas extraction syringe 100ml (100ml syringe container with SS plunger with rubber head). Qty-1. 3). 5ml glass syringe (TRUTH) (Truth inter changeable syringe metal luer lock tip (CL), 5ML, 200? c, 0.2ml graduation) qty-1. 4). Plunger rubber head (NBR rubber cap moides for 100ml syringe) qty-2. 5). 3 Way stop cock valve for 100ml syringe-qty-2. 6). 3 way stop cock septa (blue) (silicon rubber septa) qty-50
Set of hose pipes with end fittings for VCB type 20CB as per Drg. No. ELS/VSKP/2007/39, Alt- a or latest
DUMMY PLUG WITH WASHER FOR AXLE BOX GREASING NIPPLE AS PER ELS/BIA DRG. NO. TRS/BIA/D&D/M1/03-15 REV-0 or latest
Pulse generator cover gasket of speedometers ( for AAL make) as per Drg. No. ELS/VSKP/2008/07
Hardware items for Gear Case, Set consists of 09 items. Details as per Annexure enclosed.
BAKELITE BALL FOR DRIVING HANDLE OF WOAMA MAKE MASTER CONTROLLER FOR THREE PHASE LOCOMOTIVES AS PER M/S WOAMA PART NO. M-147 or equivalent
Wiper blade of size 20'' as per the following specification: (1) Beam blade of thickness: 30mm (2) Aerodynamic with double locking connector (3) premium flat beam blade ensures consistent wiping stability along the entire length of 20''. Make Bosch CA 20 or similar
Clamping Arrangement for TM safety sling as per CLWs Drg. no.-1209-01-418-033, Alt-Nil or latest. Each set consists of 1) Holder block= 02 nos./set. 2) top plate= 01 no/set 3) Spring washer, Gr 8.8, IS-3063=02nos/set 4) Hex head screw, size- M 08x16mm, Gr-8.8, IS 1364, part-II =02 nos/set. Each set consist of 04 items 07 nos. only
SINGLE ROW DEEP GROOVE BALL BEARING 6304 ZZ C3.
Set of gaskets/O-Rings for interface Header Bar (788273) of Electric CCB (Computer controlled brake system) to KBI kit No. XKI/KIT/02526 as per attached Annexure
Grease Molykote 55M, Min. 100 grams tube for lubricating O-rings, barrel & piston pins of 22CB VCB parts. Makes: Molykote as per Technical properties specified below. 1) Color : Off-white; 2) Worked penetration(ASTM D217) : 265 to 290 mm/10. 3) NLGI Grade : 2. 4) Base Oil : Silicone with synthetic ester additive. 5) Base Oil Viscosity : Approximately 100 Sq.mm/s at 25 degree C. 6) Dropping Point : 220 degree C. 7) Shelf Life : 60 months. 8) Operating Temperature : -65 degree C to +175 degree C (-85 degree F to +347 degree F). 9) Storage Temperature: -50 degree C to +180 degree C (-58 degree F to +356 degree F).
MCB 2 pole current rating 10A, Breaking capacity 10KA, voltage rating 200V DC as per Spec. No. CLW/ES/3/0037 Alt-l or latest. Make: ABB/Schneider.
Set of PVC Nylon reinforced flexible duct hose pipe confirming to IS:15265-2003 or latest. Each Set consisting of sizes [1] 5/8 inch dia - 500 Mtrs [2] 3/4 inch dia- 500 Mtrs [3] 1 inch dia - 500 mtrs.
Set of Drivers Seat and Backrest confirming to ELS/LGD Drawing No.C/ELS/LGD/ B.F/3/15 Alt-1 or latest
Supply of tamper check paste (30ml) highly visible, viscous and fluorescent in nature Tip size 2.9mm, extra nozzle 1mm as per the attached specification at Annexure
OIL SEAL FOR OCB MOTOR AS PER DRAWING A3/2021/CNB/2773/5170/GK.
WASHER SPRING STEEL SINGLE COIL WITH FLAT ENDS- M16 TO IS:3063/94 (2ND REV.)REAFFIRMED- 2004. TYPE-B.
Flap Disc (Buffing wheel) 100 mm x 16mm, Grit 60 suitable for Angle grinder. Make: Bosch or Norton or Homdum or Miranda or Polymak or carborundom or Xtrapower or Bipico
Carbon brush suitable for M/s. Rotomag make CRC model auxiliary compressor of rating 1.0HP, 1500 RPM duty cycle S1, 110 V DC supply.
Supplying of 1 TB SSD Hard Disk Apacer Brand or similar, SATA 6 GB/s interface, Backward compatible with SATA 1.5/3 GB/s interfaces Suitable for Hikvision Make CVVRS confirming to RDSO spec No. RDSO/2015/EL/Spec/0118, Rev-1 or latest. 4K Random Read/Write: Up to 93K/80K IOPS. , Endurance (in Terabytes Written: TBW):: 800 TBW , Supply Voltage : 5V +/- 5%
Digital vibration meter, measures RMS velocity in the range of 0.1 to 199.9 m/sec T- RMS and Peak, Vibration Transducer- piezo electric type accelerometer, Sensitivity of transducer : 10 pC/m/S2 similar to Metravi VIB-30 PLUS MCM MAKE MODEL : VIB 30 PLUS or Similar
HYDRAULIC CRIMPING TOOL WITH FOOT PUMP ASSEMBLY. CAPACITY- 25-400 MM SQ. (DIES-H 25,35,50,70,95,120,150,185,240,300 &400 MM SQ). MAKE- DOWELLS/JAINSON/ CRIMPWELL
Supply of Wheel for Driving and Non driving end of Cranex 65Ton EOT crane as per Drg. No. ELS/VSKP/2024/05
Set of Hose clamp for TMB and MRB of 3 phase locomotive as per Drg. No. ELS/VSKP/2021/16. Each set consisting of Sl. No. 1 to 9 Total Qty 11Nos. in a set
Set of items for clamping arrangement for earth return cable as per drawing no. ELS/VSKP/2024/18 Each set consisting of items as mentioned in note sr.no. 4.
Stainless steel Hex head screw of size M8x15mm (Fully threaded) with 01 No. flat and 01No. Spring washer. Material Stainless Steel grade A2-70. Make: TVS/UNBRAKO
GROWLER TESTER FOR 3 PHASE TRACTION MOTOR, Y A/D AC/HWDC 230V AC, 50HZ, DUAL MAGNETIZATION YOKE WITH STANDARD ACCESSORIES, THERMACOL MOULDED CARRY CASE, ASTM TEST BLOCK, PIE GAUGE, PUFFER BULB FOR POWER SPRAY, DRY MAGNETIC POWER BLACK WATER BASE 01 KG, OPERATIONAL MANUAL