Finance Department Himachal Pradesh Tender Results

brother OEM Toner Cartridge Manufactured by Brother, brother OEM Toner Cartridge Manufactured by Brother International (India) Private Limited

brother OEM Toner Cartridge Manufactured by Brother, brother OEM Toner Cartridge Manufactured by Brother International (India) Private Limited

Multifunction Machines MFM (Q2)

LAPTOP

VC equipment and installation

Multifunction Machines MFM ( PAC Only )

Multifunction Machines MFM ( PAC Only ), All in One PC ( PAC Only ), Desktop Computers ( PAC Only )

domestic electrical kettles

Revolving Chair ( PAC Only ), chairs-office ( PAC Only ), Steel Tables ( PAC Only ), Almirah Steel ( PAC Only ), Public Place Seating Chair ( PAC Only ), Executive Table ( PAC Only ) Bidder Turnover (Last 3 Years) 1 Lakh (s)

All in One PC ( PAC Only )

Revolving Chair ( PAC Only ), chairs-office ( PAC Only ), Steel Tables ( PAC Only ), Executive Table ( PAC Only ), Almirah Steel ( PAC Only ), Public Place Seating Chair ( PAC Only ) Bidder Turnover (Last 3 Years) 2 Lakh (s)

Multifunction Machines MFM ( PAC Only )

Steel Tables ( PAC Only )

chairs-office ( PAC Only )

Revolving Chair

Revolving Chair

Revolving Chair ( PAC Only )

Executive Table ( PAC Only )

Almirah Steel ( PAC Only )

Centre Table ( PAC Only )

Meeting Table ( PAC Only )

Executive Table, Sofa Set (Steel Tube), Centre Table, Almirah Steel, Revolving Chair, chairs-office, Metal Shelving Racks Bidder Turnover (Last 3 Years) 2 Lakh (s)

Executive Table ( PAC Only ) Experience Criteria 3 Year (s)

Almirah Steel ( PAC Only ) Experience Criteria 3 Year (s)

Revolving Chair ( PAC Only ) Experience Criteria 3 Year (s)

All in One PC ( PAC Only )

Laptop-Notebook ( PAC Only )

All in One PC ( PAC Only )

chairs-office ( PAC Only )

Executive Table ( PAC Only ) Executive Table ( 26 ) ( Under PAC ) Make godrejinterio Model godrejinteriotridentmiddlemaindeskwitheru Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Mode of supply Knocked Down To Be Assembled At Consignee Site By The Seller Assembled Ready To Use, Knocked Down To Be Assembled At Consignee Site By The Seller, Knocked Down To Be Assembled At Consignee Site By Consignee Himself Frame type Free standing * Understructure of table Gable end and modesty panel * Storage provided One side One side, Both side, No Storage Keyboard tray Not provided Provided, Not provided Foot rest Not Provided Provided, Not Provided MATERIAL Table top Material Three layer prelaminated particle MDF board of grade SBG II of IS 1/6 board(Wood Product) of grade II type II of IS 12823/Latest 12406/Latest, Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest, Commercial Block Board BWP grade Conforming to IS 1659, Decorative Block Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Carved teak wood, Other wood Gable end and modesty panel material Flat single layer prelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/Latest Flat single layer prelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/Latest, Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest, Other wood, NO Gable end and modesty panel Leg Material NO LEGS Teak wood, NO LEGS MISC Table top long sides To be post form half round profile with corner edge bending * Table top plain sides Edge to be banded with PVC tape of 2mm thick with the help of hot * 2/6 melt glue Gable end and modesty panel plain side Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue * Number of buffers provided N.A * DIMENSION Thickness of table top ±2mm 19 5, 9, 12, 15, 19, 25, 38 Thickness of gable end and modesty panel ±2mm 19 * Length of table top ±10mm 1500 900, 1200, 1500, 1800, 2100, 1372, 1830 Depth of table ±10mm 700 * Height of table ±10mm 750 * Dimension of leg(mmXmm) ±5mm No legs 40mmX40mm, 50mmX50mm, 60mmX60mm, No legs STORAGE UNIT Number of Storage unit provided Single storage Single storage, Double storage, Triple storage, Four storage, No storage Width of storage unit ±10mm 450mm * Depth of storage unit in mm (±10mm) 1000 * Height of smallest storage unit ±5mm N.A * Height of medium storage unit ±5mm N.A * Height of largest storage unit ±5mm N.A * KEYBOARD TRAY Type of keyboard tray N.A * Material of keyboard tray and Right angle L- type supporting bracket N.A * Keyboard adjustablity N.A * fixing of supporting bracket N.A * Length of telescopic channe±l0mm N.A * Average weight of telescopic channel N.A * 3/6 ±50Gms Keyboard front width±10mm N.A * Keyboard depth±10mm N.A * Keyboard height±10mm N.A * Finish of exposed edges of keyboard tray N.A * Material thickness of keyboard tray ±1mm N.A * FOOTREST Material of footrest N.A * Length of footrest ±10mm N.A * Depth of footrest ±10mm N.A * Height of footrest ±10mm N.A * Finish of exposed edges N.A * Material thickness of footrest ±2mm N.A 5mm, 9mm, 12mm, 15mm, 19mm, 25mm, 38mm, N.A COLOUR & FINISH Table top finish Laminate in colour with swede finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/Latest with having balancing laminate of 0.5mm thick on other side * Table top shade As per Buyer's choice * WARRANTY Warrantee period in number of years 1 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand NO * Product having BIFMA certification YES * OEM of offered product is ISO 9001:2015 certified YES * OEM of offered product is ISO 14001:2015 certified YES * 4/6 OEM of offered product is ISO 18001:2007 certified YES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Tej Singh Khanna 176310, DISTRICT TREASURY CHAMBA, 176310 1 60 2 Ratan Bahadur Giri 176215, District Treasury Office, Near Police line, Hanuman Mandir, Dharamshala, 176215 5 60 3 Jagdish Sharma 171001, O/o District Treasury Officer, D.C. Office Complex, The Mall, Shimla, 171001 3 60 4 Surender Kumar Sharma 173212, Mini Secretariat, 173212 3 60 5 Rakesh Dharmani 174001, O/o District Treasury Office Bilaspur, Changar Sector, Sadar Bilaspur, 174001 1 60 6 Rajinder Kumar 177001, District Treasury office Hamirpur, 177001 1 60 7 Sher Singh 175101, Dhalpur 5 60 8 Sheetal Bragta 172107, Near D.C. Office, Kinnaur at Reckong Peo, 172107 1 60 9 Surender Kumar Katoch 175001, District Treasury Office Mandi, Near Town Hall, 175001 3 60 10 Vishal Raghuwanshi 174303, District Treasury Office Una, Distt Una, HP 174303 1 60 11 Inderdeep Sharma 171009, Directorate of Treasuries, Accounts and 2 60 5/6 Lotteries, Block 23, SDA Complex, Kasumpti

almirah- Steel ( PAC Only ) Almirah- Steel ( 34 ) ( Under PAC ) Make godrejinterio Model godrejinteriostorewelplain Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest false * No of shelves (Nos) 4 * Type of Shelves Adjustable * Locker Provided false * Locking System with the locker NA * Cloth hanging provision in the Almirah false * Number of Doors (Nos) 2 * Door Stiffner upto full door height Provided with the almirah doors false * Number of Hinges with each door (Nos) 3 * 1/4 Number of Glass Sheet fixed in each Almirah door (Nos) N.A * Construction Welded * Lock Three Way bolting device controlled by lock * MATERIAL Material M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet, 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame, 3mm thick polycarbonate sheet fixed in the ms sheet frame, perforated MS sheet Sheet Thickness of Locker N.A * Length of Glass Sheet ±10 (mm) N.A * Width of Glass Sheet ±10 (mm) N.A * Sheet Thickness of door in mm 0.8 mm (Minimum) * Sheet Thickness of sides, back, Top and Bottom 0.8 mm (Minimum) * Sheet Thickness of Shelves 0.7 mm * Sheet Thickness of Pedestal in mm 0.8 mm (Minimum) * Material of Lock Brass and steel finish * Material of Keys brass and steel finish * DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 2000 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1450 Width in mm (± 7 mm) 910 760, 910, 1023, 700 Depth in mm (±5 486 430, 455, 480, 486, 2/4 mm) 270, 370, 400 Inside Height of Locker in mm (± 5 mm) N.A * Inside Width of Locker i mm (±5 mm) N.A * Inside Depth of Locker in mm (±5 mm) N.A * Width of Stiffner in mm (±5 mm) N.A * Thickness of MS Sheet of Stiffner (in mm) N.A * Stiffened Pedestal height in mm (±2 mm) 125 * Pedestal Width in mm (±2 mm) 75 * COLOUR & FINISH Finish powder coated * Colour of Paint steel gray * Packing: Gutta Packing * CERTIFICATION ISI marked false * WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Tej Singh Khanna 176310, DISTRICT TREASURY CHAMBA 5 60 2 Sarwan Singh Guleria 176215, District Treasury Office, Near Police line, Hanuman Mandir, Dharamshala 2 60 3 Ratan Bahadur Giri 176215, Dharamshala 4 60 4 Sheetal Bragta 172107, Near D.C. Office, Kinnaur at Reckong Peo 1 60 5 Sher Singh 175101, Mini Secretariat, Dhalpur 1 60 3/4 6 Surender Kumar Katoch 175001, District Treasury Office Mandi, Near Town Hall 1 60 7 Surender Kumar Sharma 173212, Mini Secretariat 3 60 8 Vishal Raghuwanshi 174303, District Treasury Office Una, Near Police Station, 14 60 9 Inderdeep Sharma 171009, Directorate of Treasuries, Accounts and Lotteries, Block 23, SDA Complex, Kasumpti, Shimla 3 60

revolving chair ( PAC Only ) Revolving Chair ( 47 ) ( Under PAC ) Make godrejinterio Model godrejinteriobravohighbackchair Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt synchronic * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for BLUE * 1/6 Seat and Backrest Ergonomic Seat Design true true, false Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking upright locking * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support external & fixed integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels 2/6 Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Proypylene steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 * Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, 3/6 pure leather, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram * DIMENSION Overall Chair Height ±15mm 990 * Backrest Height ±15mm 550 * Backrest Width ±10mm 650 * Seat Height ±15 mm 420 420, 450, 480, 500, 520 Seat Width ±10 mm 550 440, 520, 550, 460, 360 Seat Depth ±10 mm 550 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 730 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 30 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 30 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO YES YES, NO 4/6 9001:2015 certified OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Tej Singh Khanna 176310, DISTRICT TREASURY CHAMBA 2 60 2 Rakesh Dharmani 174001, O/o District Treasury Office Bilaspur, D.C. Office Complex, Changar Sector, Sadar Bilaspur 1 60 3 Rajinder Kumar 177001, District Treasury office Hamirpur, D.C. Office complex 1 60 4 Ratan Bahadur Giri 176215, District Treasury Office, Near Police line, Hanuman Mandir, Dharamshala 4 60 5 Sheetal Bragta 172107, Near D.C. Office, Kinnaur at Reckong Peo 1 60 6 Sher Singh 175101, Mini Secretariat, Dhalpur 6 60 7 Surender Kumar Katoch 175001, District Treasury Office Mandi, Near Town Hall 10 60 8 Jagdish Sharma 171001, O/o District Treasury Officer, The Mall, Shimla 9 60 9 Surender Kumar Sharma 173212, Mini Secretariat 3 60 5/6 10 Vishal Raghuwanshi 174303, District Treasury Office Una, Near Police Station, 3 60 11 Inderdeep Sharma 171009, Directorate of Treasuries, Accounts and Lotteries, Block 23, SDA Complex, Kasumpti, Shimla 7 60

Public place seating chair ( PAC Only ) Public Place Seating Chair ( 23 ) ( Under PAC ) Make godrejinterio Model godrejinteriobliss3seaterbenchwithoutarmrest Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Type of Seating Integrated Seat and Backrest * Style without arm and with backrest with arm and backrest, with arm and without backrest, without arm and with backrest, without arm and backrest Seating Capacity (Nos) 3 2, 3, 4, 5 Number of arms (Nos) No Arms * Delivery status Knocked Down Supply to be assembeled by Seller on Site * Seat Cushion WITHOUT CUSHION * Backrest Cushion WITHOUT CUSHION * 1/4 MATERIAL Material of Main Frame M S ERW tube mild steel, M S ERW tube, SS 202, SS 304 Material of Seat and Backrest Mild Steel Mild Steel, PU Foam reinforced with 2 mm M S sheet inserts, SS 304, MS RECTANGULAR SECTION PIPE, Perforated MS sheet covered with 40 mm cushion cover. Material of Arms cold rolled steel armrest are made up of powder coated high pressure aluminium dye cast, cold rolled steel, MS ERW TUBE, MS RECTANGULAR SECTION PIPE Material of Legs MS ERW TUBE cold rolled steel, POWDER COATED HIGH PRESSURE ALUMINIUM DYE CAST LEGS, MS round pipe - 1.6 mm thick Material of Side Bar Bracket made up of chrome plated solid steel * Thickness of material of Main Frame in mm 1.9 * Thickness of material of Arms in mm 1.2 * Type of bolts M12 Bolts * Thickness of PU Foam for Seat and Backrest ±2(mm) N.A * Density of PU Foam for Seat and Backrest ±2(Kg/Cubic Metre) N.A * Covering Material for Seat and Backrest NA * DIMENSION Overall Length in mm (±10 mm) 1600 * Overall Depth in mm ( ±5 mm) 610 * Overall Height in mm (±5 mm) 760 * 2/4 Seat Height from Floor in mm (±5 mm) 440 mm * Thickness of material of Seat and Backrest (mm) 1.2 mm * CERTIFICATION Conforming to International Standard for Public Seating (*BIFMA X 5 dot 4 or equvalent) NO YES, NO COLOUR & FINISH Colour of Covering Material N.A * All M S Strucure Finish Powder coated and chrome plated. * Colour of Paint NA * All steel component to be epoxy powder coated 60 micron thick * WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 5 MISC Seat and Backrest are Perforated true * Adjuster for legs false * Arms Chrome Plated false * Legs Chrome Plated true * Cushion on Arms false * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Tej Singh Khanna 176310, DISTRICT TREASURY CHAMBA 7 60 2 Sheetal Bragta 172107, District Treasury Office, Near D.C. Office, Kinnaur at Reckong Peo 3 60 3 Sher Singh 175101, Mini Secretariat, Dhalpur 2 60 4 Surender Kumar Katoch 175001, District Treasury Office Mandi, Near Town Hall 3 60 3/4 5 Vishal Raghuwanshi 174303, District Treasury Office Una, Near Police Station, 7 60 6 Gopi Chand 171009, Directorate of Treasuries, Accounts and Lotteries, Block 23, SDA Complex, Kasumpti, Shimla 1 60

Executive Table ( PAC Only ) MSME Exemption For Years Of Experience And Turnover No Executive Table ( 135 ) ( Under PAC ) Make godrejinterio Model godrejinterioworkofficetable5026 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Mode of supply Knocked Down To Be Assembled At Consignee Site By The Seller Assembled Ready To Use, Knocked Down To Be Assembled At Consignee Site By The Seller, Knocked Down To Be Assembled At Consignee Site By Consignee Himself Frame type Free standing * Understructure of table Gable end and modesty panel * Storage provided One side One side, Both side, No Storage Keyboard tray Not provided Provided, Not provided Foot rest Not Provided Provided, Not Provided 1/6 MATERIAL Table top Material Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest MDF board of grade SBG II of IS 12406/Latest, Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest, Commercial Block Board BWP grade Conforming to IS 1659, Decorative Block Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Carved teak wood, Other wood Gable end and modesty panel material Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest Flat single layer prelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/Latest, Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest, Other wood, NO Gable end and modesty panel Leg Material NO LEGS Teak wood, NO LEGS MISC Table top long sides To be post form half round profile with corner edge bending * Table top plain sides Edge to be banded with * 2/6 PVC tape of 2mm thick with the help of hot melt glue Gable end and modesty panel plain side Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue * Number of buffers provided N.A * DIMENSION Thickness of table top ±2mm 25 5, 9, 12, 15, 19, 25, 38 Thickness of gable end and modesty panel ±2mm 25 * Length of table top ±10mm 1500 900, 1200, 1500, 1800, 2100, 1372, 1830 Depth of table ±10mm 750 * Height of table ±10mm 750 * Dimension of leg(mmXmm) ±5mm No legs 40mmX40mm, 50mmX50mm, 60mmX60mm, No legs STORAGE UNIT Number of Storage unit provided Single storage Single storage, Double storage, Triple storage, Four storage, No storage Width of storage unit ±10mm 450mm * Depth of storage unit in mm (±10mm) 600 * Height of smallest storage unit ±5mm 125mm * Height of medium storage unit ±5mm 175mm * Height of largest storage unit ±5mm 305mm * KEYBOARD TRAY Type of keyboard tray N.A * Material of keyboard tray and Right angle L- type supporting bracket N.A * Keyboard adjustablity N.A * fixing of supporting bracket N.A * Length of telescopic channe±l0mm N.A * 3/6 Average weight of telescopic channel ±50Gms N.A * Keyboard front width±10mm N.A * Keyboard depth±10mm N.A * Keyboard height±10mm N.A * Finish of exposed edges of keyboard tray N.A * Material thickness of keyboard tray ±1mm N.A * FOOTREST Material of footrest N.A * Length of footrest ±10mm N.A * Depth of footrest ±10mm N.A * Height of footrest ±10mm N.A * Finish of exposed edges N.A * Material thickness of footrest ±2mm N.A 5mm, 9mm, 12mm, 15mm, 19mm, 25mm, 38mm, N.A COLOUR & FINISH Table top finish Laminate in colour with matt finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/Latest with having balancing laminate of 0.5mm thick on other side * Table top shade Oak * WARRANTY Warrantee period in number of years 1 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand NO * Product having BIFMA certification NO * OEM of offered product is ISO 9001:2015 certified NO * OEM of offered product is ISO 14001:2015 certified NO * 4/6 OEM of offered product is ISO 18001:2007 certified NO * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Tej Singh Khanna 176310, DISTRICT TREASURY CHAMBA 20 60 2 Rakesh Dharmani 174001, O/o District Treasury Office Bilaspur, D.C. Office Complex, Changar Sector, Sadar Bilaspur 3 60 3 Rajinder Kumar 177001, District Treasury office Hamirpur, D.C. Office complex 7 60 4 Sarwan Singh Guleria 176215, District Treasury Office, Near Police line, Hanuman Mandir, Dharamshala 2 60 5 Ratan Bahadur Giri 176215, Dharamshala 30 60 6 Sheetal Bragta 172107, Near D.C. Office, Kinnaur at Reckong Peo 10 60 7 Sher Singh 175101, Mini Secretariat, Dhalpur 7 60 8 Arvind Mohan Sharma 175001, District Treasury Office Mandi, Near Town Hall 1 60 9 Surender Kumar Katoch 175001, Near Town Hall 15 60 10 Jagdish Sharma 171001, O/o District Treasury Officer, The Mall, Shimla 9 60 11 Satish Kumar 173001, District Treasury Officer, Court Road, Near 4 60 5/6 Agriculture Office, DRDA Building, Sirmaur at Nahan, Nahan 12 Surender Kumar Sharma 173212, Mini Secretariat 12 60 13 Vishal Raghuwanshi 174303, District Treasury Office Una, Near Police Station, 12 60 14 Inderdeep Sharma 171009, Directorate of Treasuries, Accounts and Lotteries, Block 23, SDA Complex, Kasumpti, Shimla 3 60

almirah- Steel ( PAC Only ) Almirah- Steel ( 10 ) ( Under PAC ) Make godrejinterio Model godrejinteriominorplainwith3shelves Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest false * No of shelves (Nos) 3 * Type of Shelves Adjustable * Locker Provided false * Locking System with the locker NA * Cloth hanging provision in the Almirah false * Number of Doors (Nos) 2 * Door Stiffner upto full door height Provided with the almirah doors false * Number of Hinges with each door (Nos) 3 * 1/4 Number of Glass Sheet fixed in each Almirah door (Nos) N.A * Construction Welded * Lock Three Way bolting device controlled by lock * MATERIAL Material M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet, 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame, 3mm thick polycarbonate sheet fixed in the ms sheet frame, perforated MS sheet Sheet Thickness of Locker N.A * Length of Glass Sheet ±10 (mm) N.A * Width of Glass Sheet ±10 (mm) N.A * Sheet Thickness of door in mm 0.8 mm (Minimum) * Sheet Thickness of sides, back, Top and Bottom 0.8 mm (Minimum) * Sheet Thickness of Shelves 0.7 mm * Sheet Thickness of Pedestal in mm 0.8 mm (Minimum) * Material of Lock Brass and steel finish * Material of Keys brass and steel finish * DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1325 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1450 Width in mm (± 7 mm) 760 760, 910, 1023, 700 Depth in mm (±5 455 430, 455, 480, 486, 2/4 mm) 270, 370, 400 Inside Height of Locker in mm (± 5 mm) N.A * Inside Width of Locker i mm (±5 mm) N.A * Inside Depth of Locker in mm (±5 mm) N.A * Width of Stiffner in mm (±5 mm) N.A * Thickness of MS Sheet of Stiffner (in mm) N.A * Stiffened Pedestal height in mm (±2 mm) 125 * Pedestal Width in mm (±2 mm) 75 * COLOUR & FINISH Finish powder coated * Colour of Paint steel gray * Packing: Gutta Packing * CERTIFICATION ISI marked false * WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rakesh Dharmani 174001, O/o District Treasury Office Bilaspur, D.C. Office Complex, Changar Sector, Sadar Bilaspur 1 60 2 Rajinder Kumar 177001, District Treasury office Hamirpur, D.C. Office complex 1 60 3 Ratan Bahadur Giri 176215, District Treasury Office, Near Police line, Hanuman Mandir, Dharamshala 1 60 4 Sheetal Bragta 172107, Near D.C. Office, Kinnaur at Reckong Peo 1 60 5 Sher Singh 175101, Mini Secretariat, Dhalpur 2 60 3/4 6 Surender Kumar Katoch 175001, District Treasury Office Mandi, Near Town Hall 1 60 7 Surender Kumar Sharma 173212, Mini Secretariat 2 60 8 Vishal Raghuwanshi 174303, District Treasury Office Una, Near Police Station, 1 60

revolving chair ( PAC Only ) Revolving Chair ( 11 ) ( Under PAC ) Make godrejinterio Model godrejinterioversaneohighbackchair Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type Advance Bio Synchronic * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Adjustable Adjustable, Fixed, NA 1/6 Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design false true, false Back type height adjustable push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type sliding fixed, sliding Seat is curved false * Locking mechanism true * Type of locking 5-Position Locking * Number of arm movement 4(up & down end left & right) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, 2/6 Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU foam covered with mesh fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 * Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A 3/6 Material of Fabric of Seat Cover Mesh Fabrics foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) Genuine leather of 0.8-1.0 mm thickness * DIMENSION Overall Chair Height ±15mm 1310 * Backrest Height ±15mm 730 * Backrest Width ±10mm 440 * Seat Height ±15 mm 520 420, 450, 480, 500, 520 Seat Width ±10 mm 480 440, 520, 550, 460, 360 Seat Depth ±10 mm 480 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.3 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 750 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 45 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO 4/6 OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Tej Singh Khanna 176310, DISTRICT TREASURY CHAMBA 1 60 2 Sarwan Singh Guleria 176215, District Treasury Office, Near Police line, Hanuman Mandir, Dharamshala 1 60 3 Sheetal Bragta 172107, Near D.C. Office, Kinnaur at Reckong Peo 1 60 4 Sher Singh 175101, Mini Secretariat, Dhalpur 1 60 5 Surender Kumar Katoch 175001, District Treasury Office Mandi, Near Town Hall 1 60 6 Surender Kumar Sharma 173212, Mini Secretariat 1 60 7 Vishal Raghuwanshi 174303, District Treasury Office Una, Near Police Station, 1 60 8 Inderdeep Sharma 171009, Directorate of Treasuries, Accounts and Lotteries, Block 23, SDA Complex, Kasumpti, Shimla 3 60 5/6 9 Gopi Chand 171009, Shimla 1 60

almirah- Steel Almirah- Steel ( 4 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest false * No of shelves (Nos) 4 * Type of Shelves Adjustable * Locker Provided false * Locking System with the locker NA * Cloth hanging provision in the Almirah false * Number of Doors (Nos) 2 * Door Stiffner upto full door height Provided with the almirah doors true * Number of Hinges with each door (Nos) 2 * Number of Glass Sheet fixed in each Almirah door (Nos) N.A * Construction Welded * 1/4 Lock Three Way bolting device controlled by lock * MATERIAL Material M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame M S Sheet, 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame, 3mm thick polycarbonate sheet fixed in the ms sheet frame, perforated MS sheet Sheet Thickness of Locker N.A * Length of Glass Sheet ±10 (mm) N.A * Width of Glass Sheet ±10 (mm) N.A * Sheet Thickness of door in mm 0.7 mm minimum (Not as per IS 3312) * Sheet Thickness of sides, back, Top and Bottom 0.7 mm minimum (Not as per IS 3312) * Sheet Thickness of Shelves 0.7 mm * Sheet Thickness of Pedestal in mm 0.8 mm (Minimum) * Material of Lock steel * Material of Keys steel * DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1855 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1450 Width in mm (± 7 mm) 910 760, 910, 1023, 700 Depth in mm (±5 mm) 455 430, 455, 480, 486, 270, 370, 400 Inside Height of Locker in mm (± 5 mm) N.A * Inside Width of Locker i N.A * 2/4 mm (±5 mm) Inside Depth of Locker in mm (±5 mm) N.A * Width of Stiffner in mm (±5 mm) N.A * Thickness of MS Sheet of Stiffner (in mm) N.A * Stiffened Pedestal height in mm (±2 mm) 120 * Pedestal Width in mm (±2 mm) 70 * COLOUR & FINISH Finish powder coated * Colour of Paint steel gray * Packing: Gutta Packing * CERTIFICATION ISI marked false * CM/L No. - * WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Inderdeep Sharma 171009, Directorate of Treasuries, Accounts and Lotteries, Block 23, SDA Complex, Kasumpti, Shimla 4 60

revolving chair ( PAC Only ) Revolving Chair ( 361 ) ( Under PAC ) Make godrejinterio Model godrejinteriodiva7046rchair Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type push back * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for black * 1/6 Seat and Backrest Ergonomic Seat Design false true, false Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved false * Locking mechanism true * Type of locking upright locking * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels 2/6 Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material aluminium covered with pu steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 * Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, 3/6 pure leather, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram * DIMENSION Overall Chair Height ±15mm 950 * Backrest Height ±15mm 460 * Backrest Width ±10mm 410 * Seat Height ±15 mm 520 420, 450, 480, 500, 520 Seat Width ±10 mm 440 440, 520, 550, 460, 360 Seat Depth ±10 mm 420 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.3 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 715 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 45 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO NO YES, NO 4/6 9001:2015 certified OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Tej Singh Khanna 176310, DISTRICT TREASURY CHAMBA 30 60 2 Rakesh Dharmani 174001, O/o District Treasury Office Bilaspur, D.C. Office Complex, Changar Sector, Sadar Bilaspur 3 60 3 Rajinder Kumar 177001, District Treasury office Hamirpur, D.C. Office complex 23 60 4 Sarwan Singh Guleria 176215, District Treasury Office, Near Police line, Hanuman Mandir, Dharamshala 4 60 5 Ratan Bahadur Giri 176215, Dharamshala 65 60 6 Sheetal Bragta 172107, Near D.C. Office, Kinnaur at Reckong Peo 16 60 7 Sher Singh 175101, Mini Secretariat, Dhalpur 26 60 8 Surender Kumar Katoch 175001, District Treasury Office Mandi, Near Town Hall 48 60 9 Jagdish Sharma 171001, O/o District Treasury Officer, 61 60 5/6 The Mall, Shimla 10 Satish Kumar 173001, District Treasury Officer, Court Road, Near Agriculture Office, DRDA Building, Sirmaur at Nahan, Nahan 4 60 11 Surender Kumar Sharma 173212, Mini Secretariat 15 60 12 Vishal Raghuwanshi 174303, District Treasury Office Una, Near Police Station, 36 60 13 Inderdeep Sharma 171009, Directorate of Treasuries, Accounts and Lotteries, Block 23, SDA Complex, Kasumpti, Shimla 30 60

Executive Table ( PAC Only ) Executive Table ( 5 ) ( Under PAC ) Make godrejinterio Model godrejinterioascentexecutivetablewitheruandpe dstal Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Mode of supply Knocked Down To Be Assembled At Consignee Site By The Seller Assembled Ready To Use, Knocked Down To Be Assembled At Consignee Site By The Seller, Knocked Down To Be Assembled At Consignee Site By Consignee Himself Frame type Free standing * Understructure of table Gable end and modesty panel * Storage provided Both side One side, Both side, No Storage Keyboard tray Provided Provided, Not provided Foot rest Not Provided Provided, Not Provided MATERIAL Table top Material Three layer MDF board of grade 1/6 prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest SBG II of IS 12406/Latest, Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest, Commercial Block Board BWP grade Conforming to IS 1659, Decorative Block Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Carved teak wood, Other wood Gable end and modesty panel material Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest Flat single layer prelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/Latest, Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest, Other wood, NO Gable end and modesty panel Leg Material NO LEGS Teak wood, NO LEGS MISC Table top long sides To be post form half round profile * Table top plain sides Edge to be banded with PVC tape of 2mm thick with the help of hot * 2/6 melt glue Gable end and modesty panel plain side Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue * Number of buffers provided N.A * DIMENSION Thickness of table top ±2mm 38 5, 9, 12, 15, 19, 25, 38 Thickness of gable end and modesty panel ±2mm 5 * Length of table top ±10mm 1800 900, 1200, 1500, 1800, 2100, 1372, 1830 Depth of table ±10mm 750 * Height of table ±10mm 775 * Dimension of leg(mmXmm) ±5mm No legs 40mmX40mm, 50mmX50mm, 60mmX60mm, No legs STORAGE UNIT Number of Storage unit provided Four storage Single storage, Double storage, Triple storage, Four storage, No storage Width of storage unit ±10mm N.A * Depth of storage unit in mm (±10mm) NA * Height of smallest storage unit ±5mm N.A * Height of medium storage unit ±5mm N.A * Height of largest storage unit ±5mm N.A * KEYBOARD TRAY Type of keyboard tray Prelaminated particle board keyboard tray * Material of keyboard tray and Right angle L- type supporting bracket N.A * Keyboard adjustablity underdesk keyboard arm * fixing of supporting bracket With telescopic * Length of telescopic channe±l0mm 200mm * 3/6 Average weight of telescopic channel ±50Gms 300Gms per set * Keyboard front width±10mm 600mm * Keyboard depth±10mm 350mm * Keyboard height±10mm 100mm * Finish of exposed edges of keyboard tray To be banded with 0.5-1.0mm thick PVC tape with the help of hot melt glue * Material thickness of keyboard tray ±1mm 19mm * FOOTREST Material of footrest N.A * Length of footrest ±10mm N.A * Depth of footrest ±10mm N.A * Height of footrest ±10mm N.A * Finish of exposed edges N.A * Material thickness of footrest ±2mm N.A 5mm, 9mm, 12mm, 15mm, 19mm, 25mm, 38mm, N.A COLOUR & FINISH Table top finish Laminate in colour with matt finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/Latest with having balancing laminate of 0.5mm thick on other side * Table top shade Oak * WARRANTY Warrantee period in number of years 1 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand YES * Product having BIFMA certification NO * OEM of offered product is ISO 9001:2015 certified NO * 4/6 OEM of offered product is ISO 14001:2015 certified NO * OEM of offered product is ISO 18001:2007 certified NO * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sarwan Singh Guleria 176215, District Treasury Office, Near Police line, Hanuman Mandir, Dharamshala 1 60 2 Ratan Bahadur Giri 176215, Dharamshala 1 60 3 Sheetal Bragta 172107, Near D.C. Office, Kinnaur at Reckong Peo 1 60 4 Surender Kumar Sharma 173212, Mini Secretariat 1 60 5 Vishal Raghuwanshi 174303, District Treasury Office Una, Near Police Station, 1 60

biometric identification equipment Biometric Identification Equipment ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type Fingerprint Scanner Device for use with Desktop, Laptop, Tablet, POS Device etc. Fingerprint Scanner Device for use with Desktop, POS Device etc., Iris Authentication Device for use with Desktop, POS Device etc. Certification for Device and extractor software/SDK STQC Certified - API/SDK Windows 7 and above (including Windows based Mobile Phone) Windows 7 and above (including Windows based Mobile Phone), Android 4.0 and Above, Linux Integrated USB 2.0 and above Connector Yes - Connector Cable to connect the Device to Micro USB & Standard USB Yes - UIDAI Certified Registered Device (Copy of the certificate to be furnished when demanded by buyer) Yes - 1/2 Conformity to the "Terms and Conditions of UIDAI Certified Registered Device" Yes - Warranty (Years) 4 1, 2, 3, 4 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Arun Ojha 171009, Directorate of Treasuries, Accounts and Lotteries, Block 23, SDA Complex, Kasumpti, Shimla 50 15

Tablets Tablets ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values Operating System Operating System Android Marshmallow 6.0 or Higher Android Marshmallow 6.0 or Higher, Android Nougat 7.0 or Higher, Android Oreo 8.0 or Higher, Windows 8.1 or Higher, Windows 10 or Higher, iOS 10.0 or Higher, iOS 11.0 or Higher, Android Lollipop 5.1 or Higher (Exception For IRCTC) Display Display Size (Inches) 7≤ N < 8 7≤ N < 8, 8≤ N <9, 9≤ N < 10, 10≤ N < 11, N ≥ 11 Display Resolution (pixels) 1024x768 1024x768, 1280x720, 12 80x800, 1366x768, 1920 x1080, 2048x1536, 1024 X600 Display Type LCD - Brightness (Minimum) (Nits) 400 300, 350, 400, 450, 500, 7 50, 1000, 1200 Connectivity Connectivity Wi-fi + Cellular Wi-fi only, Wi-fi + Cellular Cellular Data Support 3G - Voice Calling false 1/3 Type of Wi-Fi Connectivity 802.11 a/b/g/n - Bluetooth Connectivity 4.0 & above - Processor Processor Speed (GHz) 1.2 or higher 1.0 or higher, 1.1 or higher, 1.2 or higher, 1.3 or higher, 1.4 or higher, 1.5 or higher, 2.0 or higher Processor Core Quad Dual, Quad, Hexa, Octa Memory RAM Type LPDDR3 - RAM Size (GB) 1 1, 2, 3, 4, 1.5 Storage Internal Storage Capacity (GB) 8 8, 16, 32, 64, 128, 256 Storage Upgradable upto (GB) 128 - Camera Rear Camera (MPixel) 5 2, 5, 8, 12, 13 Front Camera (MPixels) 0.3 0.3, 1.2, 1.3, NA General Battery Capacity (Minimum) (mAh) 4500 ≤ N < 5000 3000 ≤ N < 3500, 3500 ≤ N < 4000, 4000 ≤ N < 4500, 4500 ≤ N < 5000, 5000 ≤ N < 5500, 5500 ≤ N < 6000, 6000 ≤ N < 6500, 6500 ≤ N < 7000, ≥ 7000, 2500 ≤ N < 3000 Weight (max) (Gms) N≤ 400 - Certification BIS Registration Under CRS of Meity Yes - BIS Registration Number and its validity - - Google Mobile Service Certification Yes - Other Certifications Available - - Standard Accessories Standard Accessories to be supplied with the Tablet charger, usb cable - Additional Accessories OTG Cable true - Docking Connector false - Compatible Carry Case Included false - Compatible Smart Cover included false - 2/3 Compatible Active Stylus included false - Other Options Mobile Device Management Support (MDM) 1 Year 1 Year, 2 Year, 3 Year, NA Mobile Device Management Hosting (MDM) Cloud Based Cloud Based, On Premise, NA Warranty On Site OEM Warranty (year) 1 1, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Arun Ojha 171009, Directorate of Treasuries, Accounts and Lotteries, Block 23, SDA Complex, Kasumpti, Shimla 50 15

High back revolving chair Leatherite

Apple iPad Pro 10.5 inches MPHG2HNA+ MKOC2ZNA

Tablets

WATER DISPENSER VOLTAS DISPENSER

TEA & COFFEE VENDING MACHINE ATLANTIS

ONIDA SPLIT AC

Godrej Bravo Office Visitor Chair with Armrest

AIR CURTIN CONDITIONER

Khaitan Merlin I 55-Watt 16-inch Wall Fan, 400mm