GSD-GHZ-STORES/EAST CENTRAL RLY Tender Results

SUPPLY OF TOOL BOX HAVING DIMENSION 40 CM X 20 CM X 45 CM OF 1.5 MM MS SHEET AS PER IS 2062 WITH DOUBLE MULTIPURPOSE LOCK AND KEY FOR LOCO PILOT IN WAG-9 LOCOMOTIVE AS PER ROSO LETTER NO EL/0.1.3/DRIVER DATED 10.02.2023. EACH BOX SHALL HAVE FIXATION BRACKETS AT TOP AND BOTTOM BASE WITH DIMENSION SHOWN IN THE SKETCH AND OTHER FEATURES AS PER ANNEXURE-A ENCLOSED. (NOTE: ONE ADVANCE SAMPLE TO BE GOT APPROVED BEFORE BULK SUPPLY) DETAILS AS PER ATTACHED SKETCH NO.1 TO 6 AND OTHER FEATURES AS PER ENCLOSED ATTACHED ANNEXURE-A).

4 ML Grease pot for analex FDM plus. part No : FG-K15005-KW-KT-In Brand : Kittiwake each pack/Box (contains 1000 numbers of 4ml Grease pot).

Black magnetic particle ink (non-fluorescent, wet type, 400 ml Can) for Magnetic Particle Inspection (Confirming to RDSO/M&C/ NDT/109/2007 (Rev 02) Oct 2020, AMS 3041, IS 6410, ASTM E 709, ASTM E-1444, IS: 3703, ISO 9934). Packing: 500 ml can volume. Net content: 400 ml Aerosol Can.

Corrugated flexible ducting for machine room ventilation as per CLW Drawing No. 1209-11.344-051 Alt.-1

SUPPLY AND INSTALLATION OF RUBMBLE 18000 CMH AIR COLLER (WHITE MODEL) WITH TOTAL SECURITY PROTECTION BOX FOR MOTOR AND WATER PUMP GI DUCT BAND AIR GRIL AUTO SWING FABRICATION STAND WITH SHEEL. MAKE- AIRCONE AIR COLLER SYMPHONY, BAJAJ, SAHARA OR SIMILAR. AS PER TECHNICAL SPECIFICATION ATTACHED IN ANNEXURE-A.

Cover for Gear Case Oil looking glass with 6x20 mm bolt for WAG-9/Wap-7 loco

Supply and commissioning of Fire Detection unit testing jig, Supply:230 V AC 1Ph, Provision of 25 Pin connector with 24 Volt supply, Visual Indication of Normal state and Fault state, Audio and visual Indication of Alarm state 1 and Alarm state 2, DPM for Air Flow sensor signal display.

Lock assembly for machine room Door for WAG9 Locos, as per CLW Specification No. CLW/MS/3/111 Alt.-7 and CLW Drg. No. 1209-09.133-071.

KABA Key for Pneumatic panel of 3 phase locomotives (Blue key for Pneumatic panel of 3 phase Locomotives as per CLW Drg no. 1209-15-243-072 (CLW/ES/3/SK-3/0049 Alt-E) and specification no. CLW/ES/3/0049 ALT F.

BRAKE HEAD BOLT M36X185 TO CLW DRG.NO. 01/4/19/65 ALT-13 WITH CASTLE NUT

Set of Bolt Hex Head of WAG-9 loco as per Annexure attached. Specification :- CLW Spec. No. CLW/MS/3/084 Alt-Latest to IS:1364, 8.8 As per IS-1367 (Pt- 3) Gr. A to IS 1367 (Pt-II).

Set of locking plate for housing ring and pivot ring as per drg. no. TRS/GMO/M-1/G- 9/095/ECR alt-1

BATTERY GRADE DISTILL WATER SUITABLE FOR ELECTROLYTE PREPARATION TO FILL IN TRACTION BATTERIES (2.2 V/500 AH LEAD ACID BATTERIES MAKE-EXIDE, MICROTEX, KIRLOSKER ETC. SPECN: QTY.PER LOCO:250 LTRS. SUPPLY:TO BE SUPPLIED IN RETURNABLE TYPE POLY JAR OF CAPACITY 20 LTRS. SUPPLY SCHEDULE: APPROX. 2000 LTRS/WEEK. i.e.@ 800-1000 LTRS./MONTH.

Thermoplastic polyurethane spring pads (Happy Pads) for secondary springs of 3 phase locos as per Ref. No.2 (6 mm thick) of S.C. Rly. Drg. No.C/ELS/LGD/Bogie/3/140, Alt-2 & RDSO spec. No. MP.0.40.99.01 (Rev-03) August 2017.

Primary current transformer(Pos. No. 6.1) CT Ratio, 500/ 5A, rated frequency 50Hz, 30 VA, Class 3.0 as per Spec. No.CLW/ES/3/0013 Alt-B and ABB Doc. No. HBTB585560R0021.

Set of Diaphragm and O-ring for Pressure Governor (I84649/10080). One set consists of 2 items 2 nos. [1]. Diaphragm to KBI part no. KN-MCS11-I84649, Qty. 01 no. [2]. O-ring to KBI part no. B57679, Qty. 01 no. [RGCP Pressure Governor] Make-KBI

Roll pin for conventional type brake rigging as per Drg.no. 06/2/19/133 ref-2

Supply of Refrigerant gas R-407C confirming to IS: 5610/1993, re affirmed-2006 or latest if any, in 45 Kgs capacity standard cylinders on non returnable basis by filling Refrigerant gas R-407C. Note: Gas must be filled in company's sealed refrigerant gas cylinders indicating cylinder weight, net weight of the gas & gross weight, date of refrigerant gas along with test certificate of gas & cylinder, otherwise subject material is liable for rejection.

1/2 inch Isolating cock without vent (OLP) for 3 Phase Locos as per FTRTIPL Part No- 23018000 or LEGRIS Part No- 04021321 or KBIPL Part No- C146651.

Set of rotary switches consisting of 03 items 04 nos. as per CLW specification no. CLW/ES/3/0068 Alt.C (i) Rotary switch failure mode operation as per ABB indent no. HBTB 585580 R1032, qty.=01 no. (ii) Rotary switch bogie cut out as per ABB indent no. HBTB 585580 R1022, qty.=01 no. (iii) Rotary switch vigilance device cut off & configuration switch as per ABB indent no. HBTB 585580 R0034, qty.=02 nos. Contact sequence check as per CLW specification CLW/ES/3/0068 Alt-C and dimensional check as per approved drawing nos. as follows-(i) Rotary switch for failure mode operation as per CLW approved drg no. PCE-RSFMO-004, (ii) Rotary switch for bogie cut out as per CLW approved drg.no. PCE-RSBC-002, (iii) Rotary switch for configuration and vigilance device cut-off as per CLW approved drg.no. PCE-RSCVDC-003.

Compressor delivery Hose with both ends fitting for WAG-9 Locos. Specn/ Drg No :- GMO Drg. no. Drawing no- TRS/GMO/M5/3-PH/079.ECR

Foot Insulator for Pantograph Specification/Drawing No- CLW Specn.No CLW/ES/AC/I-1 Alt.-L and CLW/ES/SK-4/AC/1-1 Alt-L.

Silicon polymer for junction box cover of 3 Phase TM as per ECR/GMO Drawing No. -TRS/GMO/TM/G-9/014.

Cover for Gear Case Oil looking glass with 6x20 mm bolt for WAG-9/Wap-7 loco

Mushroom Head Push Button Switch front dimension: 40 mm. Cut out: 22.5 mm & Blue colour 110V DC 1.5A as per CLW specn. No. CLW/ES/3/0072 ALT I and RDSO MS No. RDSO/2024/EL/MS/0505 Rev 1

National Flage size 450mm x 300mm Material self sticking plastic of 120 micron

White contrast coat for Magnaflux inspection (MPI) as per BSEN ISO 9934-2/2015 contained in 400 ml minimum in each can (Aerosol can). Supplier -Oriental Chemical, P-Met, or similar.

Suction Guide Cone for Oil Cooling Blower suitable for BEHR &RPMT make impeller made of 3mm MS sheet as per CLW/ES/GK/4/0023Alt-II Ref-4 for WAG-9 Loco or as per Drg.No-TRS/GMO/E3/G-9/069/ECR.

Contactor of 12 Amps for cab AC of WAG-9 Locomotives. Make: L&T/SIEMENS/SCHNEIDER/ABB/ BCH. Note: 1) Item should be suitable for 2T capacity roof mounted cab AC of make Daulatram / Fedders Lylord / Sidwal fitted on electric locos to RDSO specification No: RDSO/2007/EL/SPEC/0055 REV.2 of Nov 2007/revised on 07.10.2014).

Supply of Refrigerant gas R-407C confirming to IS: 5610/1993, re affirmed-2006 or latest if any, in 45 Kgs capacity standard cylinders on non returnable basis by filling Refrigerant gas R-407C. Note: Gas must be filled in company's sealed refrigerant gas cylinders indicating cylinder weight, net weight of the gas & gross weight, date of refrigerant gas along with test certificate of gas & cylinder, otherwise subject material is liable for rejection.

SET OF IRREVERSIBLE TEMPERATURE INDICATOR STICKER. TEMPERATURE RANGE 71-110 DEGREE CENTIGRADE FOR 3-PHASE TRACTION MOTORS. SET CONSISTS OF 10 STICKERS.

Cover for Gear Case Oil looking glass with 6x20 mm bolt for WAG-9/Wap-7 loco

National Flage size 450mm x 300mm Material self sticking plastic of 120 micron

Refilling of carbon dioxide gas of WAG-9 loco 45 nos. cylinder of 2kg capacity and 09 nos. cylinder of 22.5kg capacity will be provide for refilling.

BOLT, Nut, Washer and spring washers one set consist of 37 items and 11875 numbers as per Annexure-1 attached. All High Tension Bolt make: - UNBRAKO or TVS or similar, Stainless Steel Bolt make: - Kundan or APL or similar.

Supply of spare for water drainage in cab AC of 3 phase locomotive as per (1) G.I pipe size-3/4" x 300mm, qty= 01no/set (2) G.I pipe size- 3/4" x 100 mm, qty= 01no/set, (3) G.I pipe size- 3/4" x 150mm, qty= 01no/set, (4) G.I pipe size- 3/4" x 50mm, qty= 01no/set, (5) G.I elbow size- 3/4", qty= 05no/set, (6) special type corrugated hose pipe siz- ID- 23mm, OD- 26mm, length- 06 mtr/set.

Digital 3 - Point Internal Micrometer Operational Range : 300- 325 mm, Least Count : 0.001 mm,Includes : Digital Display unit , Measuring Head & Suitable setting ring as per Bowers make Model No. XT5001M-BT or similar

TEST BENCH FOR TEMPERATURE SENSOR FOR CHECKING TEMPERATURE SENSOR OF BATTERY BOX, ENGINE, TRACTION MOTOR. OIL CIRCUIT TRANSFORMER, CONVERTER OIL OF MICROPROCESSOR AND HIGH HORSEPOWER LOCOMOTIVE AS PER SPECIFICATION AND DRAWING ATTACHED

Rotary Switch configuration as per CLW Specn. No. CLW/ES/3/0068 Alt. C

Test Kit of E-70 Brake electronics Cards for WAG9/WAP7 locomotives as per FTRTIPL Part No.-025128000.