Hindustan Aeronautics Limited (HAL) Tender Results

094.2306, 104.06. 64.024, 104.21. 00.011

PROCUREMENT FOR SPECIAL DOWEL PINS

HEAVY DUTY STORAGE RACK

51106932 - CONNECTOR 530721-3 AMP

SUPPLY OF TOOLS FROM HAL PROVIDED TECHNOLOGY

PROCUREMENT OF PNEUMATIC RIVET GUN

Multi Format Video Monitor

SUPPLY OF HOSIERY CLOTH CUT PIECES

Fuselage Off-JigTrolley (Fuselage A) PART NO LCH-SK-H-053, Tool Storage Racks PART NO LCH-SK-H-052, PART DESCRIPTION WORKING PLATFORM - MAIN JIG-1 P/N LCHSKH -0027, INSTALLATION TRB STAND P/N 201P 041H 1000 001, ENGINE TROLLEY P/N ALH9531, TRIMMING STAND - MRB P/N ALSK 1179

Contract for Flue Gas Analysis and Ambient Air Monitoring at HAL Lucknow for 02 Years.

Custom Bid for Services - 44442514 - AMC for repair and maintenance of rolling shutters for two years Servicing of Rolling Shutters as per Annexure-I II and III 1 No equal Servicing of rolling shutters for a period of six months Total No of .., Custom Bid for Services - 44442514 - SIDE U CHANNEL, Custom Bid for Services - 44442514 - Wicket Gate, Custom Bid for Services - 44442514 - Bottom Patti 10G, Custom Bid for Services - 44442514 - Patti 18G, Custom Bid for Services - 44442514 - Locking pieces and handle for bottom plate full set, Custom Bid for Services - 44442514 - SHAFT 2 Dia 10G, Custom Bid for Services - 44442514 - SPRING 2G 18, Custom Bid for Services - 44442514 - Worm and Gear Wheel Set, Custom Bid for Services - 44442514 - Spring 2G 15, Custom Bid for Services - 44442514 - SPRING 0G 18, Custom Bid for Services - 44442514 -SPRING 0G 21, Custom Bid for Services - 44442514 - Box Type Drum Shaft Top, Custom Bid for Services - 44442514 - Rolling Shutter Handle, Custom Bid for Services - 44442514 - Gear Box Set, Custom Bid for Services - 44442514 - Hardwares-BoltsNuts WashersHanger boltsCoach Bolts etc, Custom Bid for Services - 44442514 - Drive Shaft-1 dia 10 G, Custom Bid for Services - 44442514 - Limit switch, Custom Bid for Services - 44442514 - Push buttons, Custom Bid for Services - 44442514 - Rewinding of motor 1 HP, Custom Bid for Services - 44442514 - Motor 1HP, Custom Bid for Services - 44442514 - Contactor suitable for rolling shutter, Custom Bid for Services - 44442514 - Electrical control box for motorization, Custom Bid for Services - 44442514 - SERVOGEM NO 2 MP 2 GREASE

OSAERO JOB WORK FOR MANUFACTURING AND SUPPLY OF 03 PARTS REF SEMFG581 R2

VIDEO CONFERENCING SYSTEM

AI BASED RUSSIAN TO ENGLISH TRANSLATION SOFTWARE AS PER ENCLOSED SPECIFICATION.

SUPPLY OF TOOLS FROM HAL PROVIDED TECHNOLOGY

4- ES26 48 CNC MACHINING AND SUPPLY OF 12L-2B-4060- 001-2A0-1, 3- ES26 48 CNC MACHINING AND SUPPLY OF 12L-2B-4060-001-1A0-1, 2- ES26 48 CNC MACHINING AND SUPPLY OF 12L-2B-4020-001-2A0-1, 1- ES26 48 CNC MACHINING AND SUPPLY OF 12L-2B-4020-001-1A0-1

PC Workstation with Monitor

Custom Bid for Services - AMC FOR THREE NUMBERS OF KARDEX MAKE VERTICAL CAROSEL SYSTEMS OF FORGE SHOP BONDED STORE AND BLOCK-3A MG SHOP Similar Category Support Services

ADHESIVE TRANSFER TAPE, THICK. 0.005 IN, WIDTH= 7 INCH 1 ROLL= 55 METRE P/N: F9469PC, MAKE: 3M COMPANY

Custom Bid for Services - COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT OF ICU VENTILATOR MACHINE MODEL CVENT1200T SL NO CVTCV12CD2029 MAKE CARDIOLABS FOR A PERIOD OF 03 YEARS IN HAL INDUSTRIAL HEALTH CENTRE Similar Category Customized AMC/CMC for Pre-owned Products

RAW MATERIAL STEEL BAR FLAT ROD 34 LINES

OSAERO Insourcing of 85, 000 Man Hours for Dressing and fitting operation of sheet metal components a

Siemens Multiphysics (Structure Dynamics, Thermal & CFD and Rotor dynamics) Analysis Package

Supply, Installation, Testing and Commissioning of 1000 KVA, 11/0.415KV, Oil Cooled, Indoor type Tra

EOT Crane (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller Experience Criteria, Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 2, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2026/B/7116632 Dated : 16-01-2026 Bid Document 1/9 Number of Auto Extension count 2 Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination RCM Applicable Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 75000 ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 14 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : HINDUSTAN AERONAUTICS LIMITED AIRCRAFT MANUFACTURING DIVISION NASHIK 422207, Department of Defence Production, Hindustan Aeronautics Limited (HAL), Ministry of Defence 2/9 (Hindustan Aeronautics Limited Aircraft Manufacturing Division Nashik)

SOLID CARBIDE DRILL

68756716 - Self Solder Sleeve, P/N: D144-04 of M/s. TE CONNECTIVITY, 68756717 - Self Solder Sleeve, P/N: D144- 03 of M/s. TE CONNECTIVITY, 68756724 - Rilson Sheath, P/N: RIL-G-406-8 of M/s. METAL CLOTH PRODUCT P LTD, 68756726 - Single Core Unshielded Cable, P/N: 806AJ-1-0.38 or 1140T-22-1 or 75991A-22-1S06 of M/s. F

SC END MILL

Custom Bid for Services - CUTTING OF ALUMINIUM PLATES FLATS AS PER SIZES Similar Category Repair and Overhauling Service

Custom Bid for Services - PROCUREMENT OF SERVICES FOR AMC OF PLOTTER Similar Category Repair and Overhauling Service

HIGH QUALITY SINGLE SIDED POLYIMIDE TAPE WITH SILICON ADHESIVE (500 DEGREE F 260 DEGREE CENTIGRADE ( 11 the number pi ), POLYIMIDE FILM SILICONE ADHESIVE KAPTON TAPE, TAPE THICKNESS: 2.7 MILS, WIIDTH: 2 INCH, P/N: POLYIMI ( 4 rolls ), ADHESIVE CR-RP-150(RUBBER GLUE) PLYO BOND-20HAL STD: 2304 OR ADHESIVE 3M SCOTCH- GRIP TYPE 1357 ( 3 liter ), INSULATION TAPE, ELECTRICAL, SELF ADHERING UNSUPPORTED SILICON RUBBER TH: 0.040± 0.002 INCHES, WIDTH ( 3 rolls )

Custom Bid for Services - MAINTAINANCE OF 2 NOS OF 1000KVA TRANSFORMERS AND FILTRATION OF TRANSFORMER OIL AS PER SCOPE OF WORK Similar Category Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2)

20 Types of M Parts

R100.63. 1401-00, R100.63. 1601-00, R100.63. 0501-00

SUPPLY OF TOOLS FROM HAL PROVIDED TECHNOLOGY

SUPPLY OF TOOLS FROM HAL PROVIDED TECHNOLOGY

455KHZ CERAMIC FILTER, P/N: LTWC455E, 455KHZ FREQUENCY DISCRIM, CDBC455C29

USB IC P/N FT2232HL, REEL, IC ANG SWT P/N: TS5A3159ADBVR, 1 OHM SPDT ANALOG SWITCH, BUS SWITCH, SN74CBTLV1G125DCKR

FAST SWITCHING DIODE, 1N4148W, P/N: BYWB29-200HE3/45 UTRAFAST RECTIFIER

4FT X 3FT WHITE BOARD WITH ADJUSTABLE HEIGHT STAND

Engagement of Third Party Inspection - Service Provider (TPI-SP) for Inspection and Quality Control

ES26 43 CNC MACHINING AND SUPPLY OF 17K-4A-0100-001- 1AD-1 FOR CATS-W, ES26 43 CNC MACHINING AND SUPPLY OF 17K-4A-0100-001-2AD-1 FOR CATS-W, ES26 43 CNC MACHINING AND SUPPLY OF 17K-4B-0200-001-0AC-1 FOR CATS-W, ES26 43 CNC MACHINING AND SUPPLY OF 17K-4B- 0100-001-0AD-1 FOR CATS-W

POLYTHENE BAGS SIZE (B X L) -250MM X 350MM, POLYTHENE BAGS SIZE (B X L) - 120MM X 200 MM, POLYTHENE FLIM, POLYTHENE SHEET

Custom Bid for Services - AMC FOR CONTROL OF SNAKES Similar Category Pest and Animal Control Service

Custom Bid for Services - ELECTRICAL RENOVATION WORK IN 099 SHOP Similar Category Operation and Maintenance Of Electrical Systems/Electrical Installations

HOLDING FIXTURE(BOOSTER ROD) P/N ALHSKH 1742

PROCUREMENT OF Y AXIS BALL SCREW SET OF 5AXIS VERTICAL MACHINING CENTRE CNC MACHINE MODEL NO DMU 160

SERVER

Custom Bid for Services - RATE AGREEMENT FOR BREAKDOWN VISIT FOR 4 nos OF HASS CONTROL MACHINES IN CNC COMPLEX FOR THREE YEARS Similar Category Repair and Overhauling Service