Indian Institute Of Plantation Managementbangalore Tender Results

chairs-office

sofas, chairs-office MSME Exemption For Years Of Experience And Turnover Yes Sofas ( 3 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Total Number of Seats in the Sofa Set (Nos) 2 * Type of Sofa and Backrest Seat and Backrest are permanently fixed with the frame Structure * Number of Single Seater Units (Nos) 1 1, 2, 3, 4, 5, NO SINGLE SEATER UNIT Number of Two Seater Units (Nos) 1 1, NO TWO SEATER UNIT Number of Three Seater Units (Nos) NO THREE SEATER UNIT 1, NO THREE SEATER UNIT Number of Four Seater Units (Nos) NO FOUR SEATER UNITS 1, NO FOUR SEATER UNITS Frame Covering Fully Upholstered Fully Upholstered, Partially Upholstered, Fully Exposed Sofa Set is Foldable to false * 1/10 use as bed Backrest Cushion Material foam * Density of Cushion of Backrest Material (Kg/Cubic M) 40 * Covering Material for Seat and Backrest fabric fabric, rexin, leather fabric, Leatherite MATERIAL Frame Structure Material and size (±1 mm) any other wood of minimum 25 mm thickness 18 mm teak plywood, 19 mm commercial board, teak wood of minimum 25 mm thickness, Carved Teak wood of minimum 25 mm thickness, MILD STEEL STRUCTURE, 19mm thick Commercial Block Board BWP grade Conforming to IS 1659, 19mm thick Decorative Block Board BWP grade Conforming to IS 1659, 19mm thick Commercial Block Board MR Grade Conforming to IS 1659, 19mm thick Decorative Block Board MR Grade Conforming to IS 1659, any other wood of minimum 25 mm thickness Seat Cusion Material foam foam, rubber Density of Cushion of Seat Material ±3 (Kg/Cubic M) 40 * Type of Spring in the Base/Seating No Spring in the Base eight way hand tied spring, sinous spring, web suspension, checking couch spring, No Spring in the Base, Zig zag DIMENSION Length of Single Seater Units in mm (±5 mm) 400 400, 508, 570, 660, 700, 750, 800, 850, N.A Length of Two Seater Units in mm (±10 mm) 1500 800, 1000, 1100, 1220, 1370, 1400, 1500, 1600, 1750, N.A Length of Three Seater Units in mm 1200 * 2/10 (±10 mm) Length of Four Seater Units in mm (±10 mm) 1700 * Depth of Sofa Units in mm (±10 mm) 700 * Sofa Height (Without Back Cushion) ±5 (mm) 450 * Sofa Height (With Back Cushion) ±5 mm 750 * Arm Width ±5 (mm) 120 * Arm Height ±5 (mm) 550 * Seat Height (With Seat Cushion) ±5 (mm) 475 * Sofa Leg Height ±2(mm) 50 * Sofa Leg Width Diameter ±2 (mm) 25 * Seat Cushion Length ±5 (mm) 710 * Seat Cushion Width ±5 (mm) 510 * Seat Cusion Thickness ±5 (mm) 100 * Backrest Cushion Length ±5 (mm) 710 * Backrest Cushion Width ±5 (mm) 508 * Backrest Cushion Thickness ±3 (mm) 100 * Thickness of Foam in arms ±2 (mm) 50 * Thickness of Foam in back ±2 (mm) 76 * Thickness of Foam in front ±2 (mm) 76 * Thickness of Foam in sides ±2 (mm) 76 * COLOUR & FINISH Colour of Polish on exposed Wood frame N.A * Colour of Covering Material brown * WARRANTY WARRANTY PERIOD IN NUMBER OF YEARS 1 1, 5 3/10 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 D Nirmala 560056, Jnana Bharathi Campus, Next to AIT P.O.Malathalli 3 15 Sofas ( 12 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Total Number of Seats in the Sofa Set (Nos) 2 * Type of Sofa and Backrest Seat and Backrest are permanently fixed with the frame Structure * Number of Single Seater Units (Nos) NO SINGLE SEATER UNIT 1, Fully Exposed Sofa Set is Foldable to use as bed false * Backrest Cushion Material foam * Density of Cushion of Backrest Material (Kg/Cubic M) 45 * Covering Material for Seat and Backrest rexin fabric, Leatherite MATERIAL Frame Structure Material and size (±1 mm) 18 mm teak plywood 18 mm teak plywood, Carved Teak 4/10 wood of minimum 25 mm thickness, rubber Density of Cushion of Seat Material ±3 (Kg/Cubic M) 45 * Type of Spring in the Base/Seating eight way hand tied spring eight way hand tied spring, Zig zag DIMENSION Length of Single Seater Units in mm (±5 mm) 660 400, N.A Length of Three Seater Units in mm (±10 mm) 1850 * Length of Four Seater Units in mm (±10 mm) 2500 * Depth of Sofa Units in mm (±10 mm) 585 * Sofa Height (Without Back Cushion) ±5 (mm) 500 * Sofa Height (With Back Cushion) ±5 mm 850 * Arm Width ±5 (mm) 100 * Arm Height ±5 (mm) 500 * 5/10 Seat Height (With Seat Cushion) ±5 (mm) 450 * Sofa Leg Height ±2(mm) 50 * Sofa Leg Width Diameter ±2 (mm) 25 * Seat Cushion Length ±5 (mm) 710 * Seat Cushion Width ±5 (mm) 585 * Seat Cusion Thickness ±5 (mm) 125 * Backrest Cushion Length ±5 (mm) 710 * Backrest Cushion Width ±5 (mm) 585 * Backrest Cushion Thickness ±3 (mm) 100 * Thickness of Foam in arms ±2 (mm) 50 * Thickness of Foam in back ±2 (mm) 101 * Thickness of Foam in front ±2 (mm) 76 * Thickness of Foam in sides ±2 (mm) 76 * COLOUR & FINISH Colour of Polish on exposed Wood frame dark brown * Colour of Covering Material AS PER BUYER'S CHOICE * WARRANTY WARRANTY PERIOD IN NUMBER OF YEARS 1 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 D Nirmala 560056, Next to AIT P.O.Malathalli 12 15 Chairs-office ( 30 ) Technical Specifications 6/10 * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest false * Chair Type With Arms With Arms, Without Arms Type of Seat and Backrest Padded with Polyurethane Foam Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type 4 Legs Cantilever, 4 Legs Castors Without With, Without MATERIAL Type of Wood used in Polythene cane Chair NOT APPLICABLE solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover leatherite knitted with cane, leather foam, leather, leatherite, polyster, N.A Thickness of Plywood used in Backrest IN MM (±1 mm) 12 mm 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, N.A Frame Material chrome on MS MS, wood, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden sheet, STAINLESS STEEL, STAINLESS STEEL 304, STAINLESS STEEL 202, chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 32 Kg/Cub.M * Material of Fabric of Seat Cover black leatherite black leatherite, knitted with cane, fabric, polyurathane, N.A 7/10 Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) 32 Kg/Cub.M * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) 80 Gram per Sq Meter 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material chrome mild steel * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) 25 mm 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 15 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type Polypropylene * DIMENSION Size of Material (mm) 14 SWG 25 mm round pipe 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe Chair Height ±15(mm) 890 mm 700 mm, 750 mm, 800 mm, 830 mm, 850 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 450 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 470 mm 350 mm, 380 mm, 470 mm, 650 mm Seat Height IN MM ±5(mm) 430 400, 430, 460, 480, 500, 380 Backrest Width ±10(mm) 430 mm 350 mm, 480 mm Backrest Height 450 mm * 8/10 ±10(mm) Arm Length ±5(mm) 450 mm 200 mm, 250 mm, 300 mm, 350 mm, 490 mm Arm Width ±2(mm) 75 mm 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest black * Paint Type chrome chrome, epoxy polyster, polished, synthetic enamel, powder coated on MS, N.A Colour of Paint black * CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 NO * Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO WARRANTY Warranty period in number of years 1 1, Next to AIT P.O.Malathalli 30 15

Executive Table

revolving chair Revolving Chair ( 5 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design true true, false 1/5 Back type fixed push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved false * Locking mechanism true * Type of locking N.A * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin 2/5 Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU foam covered with mesh fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) NA * Material of Fabric Back Cover mesh fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover foam laminated mesh fabrics foam laminated mesh fabrics, Mesh Fabrics, N.A 3/5 GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram * DIMENSION Overall Chair Height ±15mm 890 * Backrest Height ±15mm 500 * Backrest Width ±10mm 550 * Seat Height ±15 mm 450 420, 450, 480, 500, 520 Seat Width ±10 mm 550 440, 520, 550, 460, 360 Seat Depth ±10 mm 480 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 650 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 35 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO NO YES, NO 4/5 14001:2015 certified OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 D Nirmala 560056, Jnana Bharathi Campus, Next to AIT P.O.Malathalli 5 15

revolving chair Revolving Chair ( 5 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type push back * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design true true, false 1/5 Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking tilt limitor * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin 2/5 Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 * Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, N.A 3/5 GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram * DIMENSION Overall Chair Height ±15mm 920 * Backrest Height ±15mm 600 * Backrest Width ±10mm 410 * Seat Height ±15 mm 420 420, 450, 480, 500, 520 Seat Width ±10 mm 480 440, 520, 550, 460, 360 Seat Depth ±10 mm 500 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.8 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 715 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 45 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand NO YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO YES YES, NO 4/5 14001:2015 certified OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 D Nirmala 560056, Jnana Bharathi Campus, Next to AIT P.O.Malathalli 5 15

Desktop Computers

Multifunction Machines