Indian Ordnance Factories Tender Results

GAS ARGON HIGH PURITY 99.9997% (MIN)

Brand Type Unbranded

Sodium Hypochlorite or Sodium Hypochlorite Solution as per IS:11673

TAPE COTTON SPECIAL 12.7 MM SCOURED SPECIFICATION: - IS-3255/1979.1ST REV. REAFFIRMED 2019.

CLOTH COTTON DOSSUTI O. G. 91 CMS WIDE

Star delta starter fully automatic for 45 to 50 HP, 3-Phase 415 Volts electric motor (Other technica

POLYPROPYLINE CORRUGATED PACKING BOX, DRG NO. CO- 484A

C. R. G. M. STRIP FOR AK47 & KF25

Tape Nylon 26 mm 500 kgf Undyed

Fabric Nylon Lt. Wt. 37 gm Rip Stop Weave Olive Drab Shade No. 298

NICKEL CRUCIBLE CAPACITY: 50ML

COCONUT OIL

Cotton sewing thread 210d tex/2(28 s/2 scoured

Hdpe Pipes For Water Supply-IS 4984

FORGING FOR LEVER FIRING TO DS CAT NO. 1010-001332 SHT NO: 3 DC (I) NO- 19528-W DT. 20.03. 16

KEY 5X5X28 GOST 23360-78, KEY 5X5X36 AS PER GOST 23360-78

HSS STRAIGHT SHANK DRILL 10.8mm DIA, FL 128mm, OAL 195mm. ( 15 pieces ) Brand Type Unbranded, DRILL TWIST STRAIGHT SHANK HSS G-31 (0.12” ) ( 200 pieces ) Brand Type Unbranded, H. S. S. DRILL ST. SHANK SIZE: 5mm DIA X 105mm OAL X 60mm FL. ( 30 pieces ) Brand Type Unbranded, DRILL HSS 10.5mm, 11.5mm STRAIGHT SHANK ( 15 pieces ) Brand Type Unbranded, DRILL TWIST ST. SHANK HSS. 3/16” X 6” (. 1875” DIA) ( 20 pieces ) Brand Type Unbranded, DRILL TWIST TAPER SHANK HSS 10.5mm DIA. ( 15 pieces ) Brand Type Unbranded, DRILL TWIST ST. SHANK HSS 10.8mm DIA. (L. H. ) ( 15 pieces ) Brand Type Unbranded, Brand Type Unbranded, DRILL TWIST STRAIGHT SHANK HSS 6mm DIA. ( 25 pieces ) Brand Type Unbranded, DRILL TWIST ST. SHANK HSS 6.5MM DIA. ( 20 pieces ) Brand Type Unbranded, Delivery Days DRILL TWIST STRAIGHT SHANK HSS. SIZE: 1.6mm DIA. ( 400 pieces ) Brand Type Unbranded, HSS DRILL TWIST ST. SHANK SIZE: 2.5mm DIA X 58mm OAL. ( 250 pieces ) Brand Type Unbranded, HSS COBALT DRILL DIA 3 X SD 3 X OAL 160 X FL 100 ( 200 pieces ) Brand Type Unbranded

Custom Bid for Services - HIRING OF 40 FEET SEMI LB TRAILER 29 MT TO TRANSPORT FR CONTAINER FROM CHENNAI PORT TO HVF AND EMPTY CONTAINER BACK TO CFS SIZE OF WOODEN CASE 1020 X 251 X200 CMS FIRM SHOULD STUDY

Custom Bid for Services - HIRING OF 40 FEET TRAILER 27 MT TO TRANSPORT 40 FEET OT CONTAINER FROM CHENNAI PORT TO HVF AND EMPTY CONTAINER BACK TO CFS THE FIRM SHOULD STUDY THE BID RELATED DOCUMENTS BEFORE PLACING THEIR OFFER THE FIRM SHOULD QUOTE FOR ..

Custom Bid for Services - HIRING OF 40 FEET TRAILER 21 MT TO TRANSPORT 40 FEET OT CONTAINER FROM CHENNAI PORT TO HVF AND EMPTY CONTAINER BACK TO CFS WT 15550 KG THE FIRM SHOULD STUDY ALL THE BID RELATED DOCUMENTS BEFORE PLACING THEIR QUOTE THE FIRM S..

Custom Bid for Services - HIRING OF 40 FEET TRAILER 17 MT TO TRANSPORT 40 FEET HC CONTAINER FROM CHENNAI PORT TO HVF AND EMPTY CONTAINER BACK TO CFS THE FIRM SHOULD STUDY ALL THE

Custom Bid for Services - HIRING OF 40 FEET TRAILER 13 MT TO TRANSPORT HC CONTAINER FROM CHENNAI PORT TO HVF AND EMPTY CONTAINER BACK TO CFS THE FIRM SHOULD STUDY ALL THE BID RELATED DOCUMENTS BEFORE PLACING THEIR QUOTE THE FIRM SHOULD QUOTE FOR 1 TR..

Custom Bid for Services - HIRING OF 40 FEET TRAILER 12 MT TO TRANSPORT HC CONTAINER FROM CHENNAI PORT TO HVF EMPTY CONTAINER BACK TO CFS THE FIRM SHOULD STUDY ALL THE BID RELATED DOCUMENTS BEFORE PLACING THE QUOTE AND FIRM SHOULD QUOTE FOR THE LUMPS..

BUSH CENTER PIN TO DRG NO. 33P 3012 FOR 38MM MSL

Custom Bid for Services - CONSERVANCY GENERAL SERVICES CONTRACT FOR FY ESTATE

CHEEK PIECE PLUNGER TO DRG NO 44P 05004*, REAR MOUNTING BLOCK TO DRG NO 44P 05102* 3, FORWARD MOUNTING BLOCK TO DRG. NO. 44P 05103* 2, T-SLOT BRACKET TO DRG. NO. 44P 05106*

CARBON BRUSH. PART NO: 16017014176, MAKE: BOSCH, REQUIRED FOR 5" ANGULAR GRINDER MODEL: GWS14-125.

APRON COTTON AS PER OFT DRAWING No. TEND. 2240, COLUOR: NAVY BLUE

FIXTURE AS PER ADK 0863.4349

STOPPER FOR PNEUMATIC TEST FOR AIR TIGHTNESS AS PER

ANGULAR CONTACT BALL BEARING B 7017

ANGULAR CONTACT BALL BEARING NO-B 71924 C TPA P4 UL/7924

MEDIUM GRIT LOW DENSITY NON OVEN WHEEL, GRIT-A6T, SIZE-OD 350X ID 180X 25 MM WIDE. MAKE NORTON/COR

SPECIAL SPANNER AS PER OFAJ DRG. NO. RST-172.

CONDUCTIVE LEATHER SAFETY SHOES

COTTER PIN 6.3X36.029 GOST 397-79 (REQ. FOR DRG. NO. AK-630 SB108) IN FINISHED CONDITION.

REPAIRING OF COPPER ELECTRODE HOLDER AS PER DRG.

NEEDLE FILE ROUND 2ND CUT 140MM, DIAMOND COATED FILE GRIT-80/100-6'' LONG FLAT, DIAMOND COATED FILE GRIT-80/100-6'' LONG ROUND

HEAT TREATED STEEL SHOTS

HYDRAULIC CYLINDER - 4 (2635005060030) – 100027117 OF HEATING FURNACE, MAKE M/S ELECTROTHERM, GUJRAT

INSERT NO. TPMR 10304-21 GR. P10/SIP; MAKE- SECO/ISCAR/METALDUR/TAEGUTEC/ROLMATIKK/MITSUBISHI TAEGUTE

CONVERSION OF GILDING METAL SCRAP TO STRIP, SIZE: 150 MM+ 2MM/0.00MM WIDE X 1.57MM+ 0.015/-0.015 MM

Cleaning Duster-IS:174

Power Cable For Direct Burial Xlpe Ugac Cable-IS: 10418

SET OF PNEUMATIC PU FITTINGS(STRAIGHT, ELBOW, REDUCER AND EQUAL CONNECTORS) . SET CONSISTING OF 30 T

ALU. SHEET 2400X1200X3MM IS737 24345

Preparation and supply of (CBT) computer based training module for 40mm MGL

M35 HAND TAPS M10 X 1.0 SET OF 2 TAPS MAKE: ADDISON/IT/YG

FULL SLOT DISC TYPE CUTTER (OR) SDN HELIQUAD ISCAR ORD NO: SDN D 125-10.5-10-10 INGERSOLL ORD. NO, 3V

O&M OF HOB TO ORG NO. 54-C-30049. TO MFG COMPT NO 675-64-326.