Indian Railway Tenders

WOOL COTTON ABSORBENT (Roll pack 500 GM )

SNAP-ACTION SWITCH

SET OF THRD PIPES FOR LWSCN RCF

Air Purifier with Remote Control and three stage air cleaning.

Explosive Gas Detector

ABSORBENT GAUZE CLOTH 60 CM X 18 M (per than).

Dust excluder for 203mm brake cylinder.

TOGGLE SWITCH DPST 250 VOLTS/10 AMPS AS PER IEC/RGK TYPE 1020-PL OR EQUIVALENT KAYCEE MAKE.

Bandage cotton ISI specification 10 cm x 4M

Cotton Crepe Bandage 10cmx 4mtr.

Absolute Sealed Linear Encoder Measuring.

Cotton Crepe Bandage 15 cm x 4mtr.

POVIDONE IODINE SOLUTION 5 % W/V 100 ML BOTTLE

Isopropyl Alkahol in 1000ml bottle

Povidone Iodine Solution 5% in 500ml bottle

Supply of Single Row Deep Groove Ball Bearing

Set of Hybrid Insulated Bearings

LAVATORY BOWL FACING AS PER DRAWING NO. 1-10113.0.30.095.002 ALT.- A, MDTS-133 REV.- 05, COLOUR SATIN BLUE ISC-177.

Intra Venus Infusion Set

GREASE NIPPLE 1/4 INCH GAS ND 6160 TO NEI DRG. NO. X-105 ITEM NO. 20 ALT. m OR FAG NO. 901-17-101 ITEM NO. 20

[Supply of TUNGSTEN CARBIDE ROTARY BURR CUTTER similar to MODEL NO: "CD- 12-D" (Diamond Cut) of CRAFT TECH TOOLS.]

Rate Contract for E-Check of CIL make engine QSK50 L of 1600 HP DEMU

Developmental Tender for procurement of Sealing Adhesive, Loctite or equivalent

Pest Control Treatment and Monkey Handling Work in Rolling Stock Workshop, Charbagh, Lucknow for a period of 02 years.

Bandage cotton ISI specification 15 cms x 4 M

SLOTTED PAN HEAD SCREW M5x20 MM. TO IS: 6101- BRASS.

[Procurement of Electrolytic Apparatus for Copper Estimation at Chemical Lab/Shell]

Fast Acting Solvent based Liquid Stripper

SET OF PILLAR ASSEMBLY BOLTED TYPE FOR AMRIT BHARAT SCN COACH

Developmental Tender for procurement of SET OF CABLE TIE FOR WAG-9/WAP-7 for Other section

AIRLESS SPRAY PAINTING MACHINE SPARE PARTS as per attached annexure.

10-Size 4-Way Valve Housing for PS10-40 10-Size 4-Way Valve Housing for PS10-40 Sequence Valve (Pressure Control Valve) for 140T Crane as per Drawing No. JT/SK- 3535. Material: SS 304 Note: 1. Material test certificate from NABL approved LAB should be submitted along with the supply material. 2. Firm should submit GC/TC along with the supply material.

Two Piece Glass Shutter........

Flag hand signal red bunting cloth cotton khadi size 45.7 x 45.7 cms with a fold on one side for inserting handle of 25mm

[Supply, Installation, Testing and Commissioning of Semi-automatic Double disc grinding/polishing machine for the preparation of metallographic micro specimen as per the Technical specification attached. ]

[Supply of set of Hand Tools as per Annexure -I ]

GUIDE RAIL.

Set of maintenance spares compatible with Sidhbali Industries

ELGI MAKE CYLINDER DIA 60 DISC VALVE FOR TRC1000MN PART NO. 00021011A.

M.S. CLAMP FOR PIPES.

Flash back Arrestor for oxygen regulator and LPG Regulator

AIR PRESSURE REGULATOR FOR VCB 20 CB & 22 CB MODEL R97 WITH GAUGE SIZE 50 MM. OF M/S. SHAVO NORGREN, MUMBAI.

UPPER RUBBER WASHER FOR BOGIE BOLSTER.

Developmental Tender for procurement of SET OF BASE FOR CABLE TIES

ELGI MAKE CYL DIA 100 D/V M/C SSI5 TS12 PART NO. 00021010A.

MCB 2 pole current rating 10A, voltage rating 250V DC, C Curve, as per Spec. No. CLW/ES/3/0037 Alt-H or latest for HOG control circuit modification as per RDSO MS No. RDSO/2026/EL/MS/488 (Rev 1)

Set of Damper for WAP-7 Locomotive. Specn./ Drg. No - As per CLW's Spec No.- CLW/MS/3/SPEC/ELDO-BOGIE/002 Alt-1 NOVEMBER 2013 and CLW's Drg. No.- 1209-01.215-014 Alt- 2. One (1) set shall comprise Quantity/loco as: (i). Axle Damper, qty- 8 per loco, Drawing No.-1209-01.215-014/1. (ii). Vertical Damper qty.- 4 per loco, Drawing No.- 1209-01.215-014/2. (iii). Horizontal Damper qty.- 4 per loco, Drawing No.- 1209-01.215-014/3. (iv). Yaw Damper qty- 4 per loco, Drawing No.- 1209-01.215-014/4.

ROD LATCH SUITABLE FOR CLOSING OF DOOR.

SUPPLY OF 70 WATT LED STREET LIGHT FITTINGS LUMINAIRE SYSTEM EFFICACY (LUMEN/WATT ) >/= 100 LM/WATT IP RATING AS PER IS: 10322(PART 1) :1982 LATEST IP 66 INPUT OPERATING VOLTAGE RANGE AND FREQUENCY 90 TO 300 VOLTS AC AT 50HZ +/- 2 WITH AUTO CUT OFF AT BELOW 120 V LED CHIP EFFICACY = 130 LM/WATT , HEAT SINK SHOULD BE DIE CAST ALLUMINIUM ALONG WIYH SUFFICIANT HEAT SINK FINS TO DISCIPLATE HEAT EFFECTIVELY OPERATING TEMPERATURE RANGE -10 DEGREE C TO 50 DEGREE C WITH SHORT CIRCUIT PROTECTION , COLOUR TEMPREATURE 6000 +/- 500 K WITH ISI MARK

Provision of AC's along with allied woks at Officers Club, Admin, Hospital, ORH & Plant of RWF.