Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
18,661 live7,022 closing this weekmost from Central Railway and Western Railway
18,661 results • Latest
MANUAL METAL ARC WELDING ELECTRODE CLASS A4 & Class A3
Recorder Main Card to Laxven Part No 2000E2 -SA-1001-2 for LAXVEN make pulse generator.
Supply, installation and Commissioning of Portable type Fume cum Mica dust Extractor with two nos 360 degree movable arm of lenght minimum 3 mtr.
S.S.TUBE for WAG-9HC O/D 25.4 mm(1") x 2.108 mm W.T. x 6 Mtrs. Length (Weight/mtrs. = 1.22 kg.) as per CLW Specn. No. CLW/MS/3/0029 Alt.10 or latest. (As per UVAM ID:2100105).
1. Flasher Hooter (52266830) 2. Heat Detector (52266831)
Set of Instant Push fittings for 6mm OD Nylon tubes with the following Specifications. (1) Working pressure : 10 bar Max. (2) Working temperature : -5 to 60 degree C. (3) Constituent Materials i) Body : Glass reinforced Nylon/ Technical polymer; ii) Surface treatment : PTFE; iii) Collar : Nylon; iv) Gripping ring : Stainless Steel; v) O-Rings : Nitrile/ NBR; vi) Sub-base : Plated. Set consisting of 03 items as follows. a) Instant male stud elbow 1/4" x 6mm OD Tube as per M/s. SMC Part No.KQ2106-02NS or its equivalent Qty/set. = 01 No. b) Instant male stud connector 3/8" x 6mm OD Tube as per M/s. SMC Part No.KQ2H06-03NS or its equivalent . Qty/set. = 1 No. c) Instant Male Branch TEE 1/4" x 6mm OD Tube as per M/s. SMC Part No.KQ2T06-02NS or its equivalent Qty/set. = 1No. Note: One sample set should be got approved before effecting bulk supply.
COPPER TUBE 12.7 mm [1/2 inch] O/D x 1.245 mm WT x 6 Mtr. Long (weight/metre = 0.399 kg). AS PER SPECN.NO. CLW/MS/3/030 Alt.-13
Hexagonal 3/8 inch male (cone type) X 1/2 inch female adopter of size: Total length: 40mm male thread length 15mm, Female thread length 15mm, Inner dia: 9mm. Material Specification: Carbon Steel ASTM:108-A grade:1018. Adopter should be coated with Zinc Yellow.
1/4 inch Male female Elbow, Male side BSPT Parallel thread with cone type face zinc plated, Elbow should be machined from forged planks & not to be cast.
1. Y-Strainer Size (3/4) (52266759) 2. Y strainer size: 1 1/4 (52266758)
Supply, erection, testing and commission [Supply, erection, testing and commissioning of an Outdoor type Transformer of capacity 11 kV/0.415 kV 500 kVA.
MANUAL UNCOUPLING DEVICE OF LHB COACHES AS PER RDSO SPECIFICATION NO. RDSO/2011/CG-03 (REV. 3) WITH AMENDMENT SLIP NO. 1 OF JULY 2024. MAKE: ESCORTS/SANROK/FRONTIER/NWFP AS PER RDSO LETTER NO. MC/BLB/CBC DATED 28.04.2025.
Microprocessor based control and fault diagnostic system with remote monitoring and analysis feature (MPCS)
SET OF STAINLESS STEEL PIPE LINE FITTINGS FOR SANDER CIRCUIT ON BOGIES OF 3 PHASE ELECTRIC LOCOMOTIVES AS PER CLW SPECIFICATION NO. CLW/MS/3/053 Alt-21 or LATEST. SET CONSISTING OF: (1) UNION TEE 10 MM OD; QTY= 50 NOS/SET (2) UNION ELBOW 10 MM OD; QTY= 100 NOS/SET (3) UNION 10 MM OD; QTY= 50 NOS PER SET. ONE SET CONSISTS OF 03 ITEMS IN 200 NOS.
SUPPLY OF CIRCUIT BREAKER 100 A, 250V FOR GENERATOR FIELD AS PER EMD PART NO. 40048903 IN HHP LOCOMOTIVE.
1. Contact Tip 1.2mm & TIP ADAPTOR (52266750) 2. Gas Nozzle (52266752)
Diesel engine operated tractor mounted mobile shunting equipment
Dummy plug size:1 1/2", Material : MS as per Drg. no. 4TACG9UA2, Rev. R1 suitable for sand ejector of WAG-9/ WAP-7 locos. Note: One sample should be got approved before effecting bulk supply.
HEX HEAD SCREW M16x60 HIGH TENSILE IS:1364(PART-2)-2002 CE-WITH PROPERTY CLASS10.9 TO IS:1367(PART-3)-2002 COATING AS PER MDTS-057.
BOGIE CENTRE PIVOT TOP TO RDSO DRG NO. WD-85079-S-2, ITEM-2, ALT:29 FOR CASNUB BOGIES CONFORMING TO RDSO Spec.no.WD-17-CASNUB-22HS- BOGIE-92 REV-4 OF SEPT.2024.
Reservoir for WAG-9HC loco as per CLW Spec. no. CLW/MS/3/110, Alt-3 consisting of 02 items as follows. 1) Brake supply reservoir 240 Ltrs. As per Drg.no. 1209-07.132-011, Alt-5 or latest if any. Qty/set. = 01 no. 2) Main reservoir 450 Ltrs. As per Drg. no. 1209-07.132-010, Alt-4 or latest if any. Qty/set. = 01 no. (As per UVAM ID:2100122)
High Voltage Bushing consisting of 2 items:- (a) Mica-fill bushing-01no./Set (b) M-20 Brass nut-- 02 Nos./Set Specn/ Drg. No :- (a) Type RMF 30Y/630 SL and ABB drg.no.-HLJM126284-f or CLW Spec.no.-CLW/ES/3/0052 Alt-F. (b) M-20 Brass nut - as per CLW/ES/3/SK-3/0052 Alt-F.