Indian Railway Tender Results

3 phase induction Condenser motor suitab3 phase induction Condenser motor suitable for LHB type RMPU AC coaches 415V AC, 3- ph, 50Hz, 0.75KW, 1500RPM (Synchronous speed ), frame size 80M suitable for foot-cum-face mounting (type C flange ) as per RDSO spec. no. RDSO/PE/SPEC/AC/0089 (Rev. 0 ) with amendment no. 1 & 2 or latest. Material shall procure from RCF approve source only.

Click type Torque wrench of 1/2

SS TUBULAR PARTITION ACCESSORIES

FACE PLATE, For Buffer Plunger Drawing No.:- RDSO / SK-94254. alt. (3) Specification:- ICF/MD/SPEC-252, Issue Status:0l, Rev.00, (Amendment-4)

Set of Dowty/bonded seal washers

Digital Axle Counter spares

Heavy duty round endless polyster Sling of effective length 3 meters (Circumfertial length of 6 meters) of 04 Ton Capacity.

BARREL TOWER BOLT (ALUMINIUM ALLOY)

TOILET PAPER HOLDER

CONTACT JAW FORROOF

Rubber Profile for Fixed Window Unit of LHB Coaches

Ultra Light Weight Triangular shaped, self- sharpening cubitron mineral grits grinding

Spring Box Mounted As Per FTRTIPL

PTFE SPACER OF SIZE ID -16.5 MM OD -50MM, THICKNESS 1.2 MM FOR BRUSH HOLDE ASSEMBLY

6mm Tube Union Tee, Material brass

Washer for Centre Pivot Assy. to RDSO DRG. No. WD-85079-S-2, Alt.-28, Item 4. Material conforming to IS: 2062- 2011 with amendment No. 1 of Nov. 2012, Grade: E 250 A, color: Red Paint (IS:5,code:538) for steel plate and IS:5192: Part- I:1994, Grade: Z-70. Other technical requirements conforming to RDSO STR No. WX-23008 and Inspection Check sheet- WX-25002.

Non%u2011toxic Inter Caster Oil

Skid tongue Handle asmble SK25 ( As per attached Annexure-I for RDSO specification and Annexure -II for Drawing).Item must be supplied with SOLID Pipes as indicated in RED Ink at Annexure-II.

Flap Door Chainless Cotter Rivet .

Modified half wiper ring

Sertraline 50 mg

Hand Held Search Light,Type-LED,55 Watt

RSTP Optical Modem 4 PORT, 48VDC/110V DC,

complete set of Inspection gauges for Th

Assembly stand for inner and outer coil of steslitmake for SL-30 As per Drg.no.4TMS/CNB/DRG/2022/42.

Set of spares for Dummy Plate for Parking Brake Manifoldas per FTRTIPL Part No- FT0051404-K81 consists of 05 items

SIGNAL LIGHT MOUNTING PLATE 4 INCH X 4 INCH, 3 MM THICK MS PLATE

Supply of cut off wheel for metal.

WASHER 3/8 AIRCRAFT

Bracket (Uncoupling) EMD part no 9520074

XLPE cable of size 2 Core x 16 Sq mm

BELL ALARM

Supply of Battery fuse Box negative (-ve).

COMPENSATING RING FOR AXLE BOX GUIDE ARRANGEMENT.

Dust shield spring for axle box guide arrangement.

Rotor Compatible for Battery Operated Rail Bolt Tightening

Deep Groove Ball Bearing Electrically Insulated for NDE as per FAG document no. EDD6318 M-J20AA-CSM15CS 000, part no. FAG 6318-MJ20AA-C5-M15CS of motor type MJC280-1 fitted in MRVC-II EMU RAKES

A6 CALIBRATION BLOCK

Cattle Guard for DEMU/DPC

front look out glass

Snubber circuit varister

Key, Drive shaft

Supply Of UPVC 90⁰ bends, Items-UPVC

MIG WIRE DIA 1.2MM CU COATED SOLID etc.

EMPTY REFILLABLE SEAMLESS GAS CYLINDER

HEX HEAD SCREW M8 x 30mm TO IS:1364/200

CLAMP FOR TERMINAL BASE OF HITACHI TM. HS-15250 A DRG. NO. 10 S-813-675, REV-C. Spec:

10 SQ.MM (RED) Thin Walled

Set of Mirror Holder For Toilet of LHB etc.

SET OF BELT ASSEMBLY FOR TRANSVERS MIDDLE BERTH OF LHB AC ECONOMY COACH AS PER RCF DRG. NO. ED61125 alt Nil. NOTE: (1) ONE SET CONSIST OF ITEM NO. 1 NYLON BELT, QTY- 01 NO , ITEM NO 2 HOLDING BRACKET, QTY- 01 NO, ITEM NO 3 BLIND RIVET , QTY- 10 NOS, ITEM NO. 4 MCD WASHER A5 , QTY- 20 NOS (2) ONE END OF BELT AT HOLDING BRACKET END SHOULD BE IN ASSEMBLED CONDITION, WHEREAS, THE OTHER END SHOULD BE OPEN ENDED FOR ADJUSTMENT OF LENGTH ON SITE. (3) IN ADDITION TO EFFECTIVE LENGTH, (i.e. TOTAL LENGTH OF 816 MM + 60 MM) 02 ADDITIONAL RIVETS SHOULD BE PROVIDED IN ASSEMBLY IN CONSULTATION WITH CONSIGNEE. (4) EACH SET SHOULD PACK SEPARATELY. (5) SAMPLE SHOULD BE APPROVED BY THE CONSIGNEE BEFORE BULK SUPPLY.