Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
1,71,917 results • Latest
BIS 110 CHANGE OVER SWITCH
1/2 Dia MS PIPE for ACP Paralleling
I.V. SETS - STERILE DISPOSABLE NEEDLE WITH AIR VENT CE or ISI CERTIFIED IS- 9824 Part-3 Latest
Set of bearing cover (PE) for Hitachi TM type HS-15250A Consisting of two Items: (1) Outer Bearing Cover as per Hitachi DRG. No. 10Q.750-258 Alt-7 Item-1 (2) Inner Bearing Cover as per Hitachi DRG. No. 10Q.750-258 Alt-7 Item-2 Drawing is as per attached in annexure.
Clean Silica sand, free from clay, loams, mica and other foreign material, as per specification no. AA
Printed Circuit Board, SS9 to KBIL Part No. 773478 for WDG4 & WDP4 Locomotives.
SOLENOID VALVE (PANTO) FOR E70 BRAKE SYSTEM
SUPPLY OF NUT WITH CARRIER
USB outlet Type A and C 20W, Charging point suitable for fitment in mobile charging unit on seat arrangement of make - AIR FLOW EQUIPMENTS of Vande Bharat trainset coaches, Make-Oswin code 1138 or Similar. Sample to be approved before bulk supply.
Supply, installation and testing of one UPS with battery bank and electrical work with fabrication - compatible with Eicher Pro 3014M LPO as per specification attached.
SENSOR TEMPERATURE
Annular Cutter for drill machine with Pin, Size-17.5 mm. suitable for Light weight rail drilling machine as per IS 5103.
Flange Jointing for BPTN Wagon
Supply of 110V, 200AH lead acid battery Set comprising 55 cells of 2V each, with tubular positive & pasted negative plates.
1-SUPPLY, INSTALLATION ,TESTING AND COMMISSIONING OF LED GLOW SIGN 2- Supply of 160 Watt LED Flood light operating voltage 140-270V 50 Hz Color
Transformer module primary voltage
TIE BAR ASSLY.BRAKE RIGGING TO DRG.NO. SKVL-186 WITH GREY PAINT
BRACKET SUPPORT
HEX.NUT ZINC PLATED OR PHOSPORATED 1/2"
Carbon steel / Alloy steel Nut
Advance battery analyzer
"RECOIL SPRING WASHER [B.G.] TO IRS DRG. NO. W/BD-350, ALT. 2."
BEARING SHIELD NE FOR 1TB2622 OTA02
Set of Anti Vibration Rubber Pad for MVMT foundation and Duct for MVMT as per Drg.no.BSL/TRS/AUX/GKT/4/101. (1 set consists of 2 items, 3 nos.)
Hose assly 1/2 inch ID x 18 inch
LED light fitting for Berth reading light.
P.U. PAINT TOP COAT, COLOUR-CORAL RED ,COLOUR CODE-RAL-3016, TWO PACK SYSTEM WITH RDSO SPECN. NO. M&C/PCN/100/2018 WITH AMENDMENT No. 1B (REV. 2.0) AS AN ADDITIONAL REQUIREMENT P.U. PAINT TOP COAT, COLOUR Spec:P.U. PAINT TOP COAT, COLOUR
Aux Converter Contactor (BN OUT PUT)
Terminal Block Assembly Complete
Supply of Check Valve Fuel Filter(Cummins Part No. 3240088)
Supply & testing of Digital surge tester [Supply & testing of Digital surge tester 5KV to test the coils & windings of Low Range AC Rotating machines ranging upto 660V, model: D-5K of M/s. Jabbals make or its equivalent in Makes: Fluke/ Meggar/ VIVID/ Motwane as per the technical specifications mentioned overleaf.]
MAGNET VALVE ASSLY (Rotex) for VCB Schneider part no.VDRM00150-01
Supply of Self-content drinking water cooler with(non-CFC refrigerant) energy efficient compressor,Full SS body Cooling capacity 150 Ltrs / Hrs, Storage capacity 150 Ltrs, Rate of maximum energy watts 1550 watt, Water cooler cabinet sheet material stainless steel ( Garde AISI-304) Cooler cabinet sheet thickness 0.8 mm, IS: 1475 latest.
Flash back arrestor (Dry type)
Enamel, Synthetic, Exterior, Finishing Dark Admiralty Grey to ISC:632 of IS:5/2007 (RA-2022). To Spec. IS:8662/04 (RA-2019) or the latest and ICF/MD/Spec- 045, issue status 2, Rev.03 with Amdt. Dt. 22/4/2008 or the latest. The pigment content shall be 6% minimum (by mass) as per RDSO lr.No. M&C/PCN/I/64/I/Vol.II dated 12/5/2016 as RDSO Amdt. No.1 Packing condition- Packed in20 liters New, Sound and Non-Returnable MS drums to IS 2552/89 (RA -2018) with Amdt.No.1 Gr.B2
Modified sander for WAG9 and WAP7 Locos
AMI No.16.N.02/2026-27 Inj Nano-Paclitexel 100 mg
Capacitor 0.22 mfd +/-10% 2000 Volt
Ventury for Ventury type ventilation arrangement ......
53.5-55.5 cm Liquid Crystal Display LCD Panel or Monitors
A set of spares for ANEST-IWATA compressor
Main Contactor for local main supply (K43)
Modified Hand Brake Assembly complete (Gear type)
Inlet and Exhaust valve
Safety wire rope 12x650 mm (Modified Design) for Brake beam.