Loading
Loading…
Loading…
38 results • Latest
CYLINDER KEY WITH SPANNER INDUSTRIAL
Reciprocating Air Compressor, CAP-330 CFM,25 Kg/cm2 (As per attached Technical Specification)
automatic welding system suitable for MIG/MAG welding of pipe & flange joints
Rubber Hand Gloves Acid Proof & alkali resistance Std. Size 16 inch to IS:4770- 1991 Amndt.-1
End Cover CE for Traction Motor CGL make Model No.C-1005 TM,conforming to CGL Drawing No.CGM/306704 or M/S TECHNO CRAFTS part No. TC/ECCE/306704'' for 1400 HP DEMU-DPC
Lock Bolting (Huck Bolting) 1/2", 3/4", 5/8", 7/8" Lock Bolts & With Hyd. Power Pack Including Concomitant Accessories, (As per attached Technical Specification)
Helical Spring for Bogie of High Power DMU/DPC 1400 HP to ICF Drg. No. DMU/DPC5-0-1-501, Alt-l (Small-L), Item No. 1. Matl. & Spec. as per Drg.
Single Row Deep Groove Ball Bearing Type 6308-Z/C4
Set of prefabricated body Side walls, End walls, Flap doors & Crib angle
" U " clamp Forged with Nylon insert Nut for 20mm Wire Rope Griping Each Bracket With two Nylon insert Nut
LOCKING PIN FOR CTRB mounting and dismounting machine suitable for Model no. SE /CTRB/100-70 T of Siloman Engineers
AUTOMATIC DRAIN VALVE FOR AIR RECIEVER CAPACITY 1.5 KL TO 5KL , POWER SUPPLY 230V/50Hz , THREAD SIZE 1/2
SET OF SPARES SUITABLE FOR THE GODREJ FORK LIFTER - CAP-03 T0N- MODEL- GX300D (ONE CONTAINS FOLLOWING ITEMS) 1-MH02590479 FILTER INSERT QTY-1 NO 2-MH02590437 FILTER ELEMENT QTY-1 NO 3-FILTER PA 5017056 PRIMARY QTY-1 NO 4-FILTER PA 5017055 SECONDARY QTY-1 NO 5- VEHICLE PAD ENGINE POLYBOND QTY-1 NO 6-HEX BOLT Stt HT GR 10.9M12 QTY-1 NO 7- COLR NUT M12 1.75MM HT QTY-1 NO 8-FILTER ELMENT ORF ELOFIC EK3246 QTY-1 NO 9- TPRD ID53.975MM (cup and cone) QTY-1 NO 10- TPRD ID66.675MM (cup and cone) QTY-1 NO 11- PRCCOMP PL WHL BOLT M20X2.5X78 -QTY-1 NO 12-HEX NUT M16X1.5MM HT QTY-2 NO 13-PRCCOMP ROD CHAIN ANCHOR CS -QTY-1 NO 14-PRCCOMP PIN FORK LOCK 2A QTY-2 NO 15-BANJO BOLT MS M14 1.5MM L31MM QTY-5 NO
AIR OIL SEPERATOR ELEMENT SUITABLE FOR KIRLOSKAR MAKE AIR COMPRESSOR MODEL KES-55 -CAP 300CFM .
Safety Valve For BTPGLN tank wagon as pe [Safety Valve For BTPGLN tank wagon as per Drg. No. V- A1-003 Rev 1 for BTPGLN Wagon. Accepted make - Ariecal, Midland & Chandra Engg. or similar , as per RDSO recommended specification WD-05-BARREL- 2011. TEST CERTIFICATE WITH ALL REQUIRED DOCUMENTS required at the time of delivery.]
Torch Head ( P - 80 ) suitable for air
SEAT/PLUG OF EXCESS FLOW CHECK VALVE AS PER DRG. NO. V-A3-001 ITEM NO. 01 , MAKE-ARIECKAL,CHANDRA & CO.,MIDLAND OR SIMILAR
6 MM EXCESS FLOW CHECK VALVE ASSEMBLY AS
Set of filters suitable for KIRLOSKAR
Pay out spring for IRSA-600 type slack adjuster to RDSO drg. no. WD-82064-S- 04-RC, Alt.-6, item no.-2, Material should cofirming to RDSO Spec. No. 07-ABR- 1992 with amndt. No. 5 of Sept. 2016.
Finishing anti tracking varnish (approved brand) at Room temperature curing. MI No. MP.MI-153/92, Rev-04, S.No-6 (a) , Sept 2014.
Hydraulic high pressure Quick release coupler set ( one Male & one female) , Body size-3/8, max pressure-10000PSI.Make-Parker/ HYDAC/ETON/GATES or Similar.
LIQUID EDUCTION VALVE PIPE AS PER DRG. NO. WCS-7801-S-63 ITEM NO. 5, MATERIAL- IS:1239 PART-1
Dia 3.6x64 mm Spring Cotter Pin/R-Clip for Shackle lock/ Centre Pivot of BOXN/BCN Wagon to Drawing No.: RDSOs Drg. No. WD-97049-S/3, Alt. 12 or Latest, Item No. 10. Material and Specification made of steel confirming to DIN 11024. ZINC PLATED
DIRECTION CONTROL VALVE C314 (4WE6 Y 6X/E G24N9K4) SUITABLE FOR AVDEL/AVLOCK MAKE HUCK BOLTING MACHINE MODEL-HP41 WORKING PRESSURE- 700 BAR, MAKE- REXROTH/AVLOCK/AVDEL/SIMILAR
SOLID MIG/MAG WELDING FILLER WIRE, CLASS VI SIZE 1.2 MM (SPEC.NO.IRS M-46/13 or LATEST WITH AMENDMENT NO.1 GRADE ER 308 L AS PER AWS: A5.9-10) IN SPOOL OF 12.5 KGS/ROLL.
Anvil for 3/4 inch Nose Assembly N30 suitable for AVDEL make Huck Bolting Machines Hand Held Unit [Make; Avlock,Stanley, Avdel or Equivalent]
JAW SET (1 SET =03 Nos.) for 3/4 Nose Assembly N30 installation tool suitable for avlock /avdel Huck bolting M/c
set of brushes for cup cleaning m/c of class E CTRB. one set consist of fallowing items 1-steel wired brush-1 nos ,2. nylon brush 02 nos
M.S. black Hex Head Bolt to IS: 1363(pt-1)/2019, Rev-5/ISO 4016 , M12x75, property class 4.8 with M.S. black Hex nut to IS:1363(pt-3)/2018, Rev-5/ISO 4034, M12 , property class-5
Paint enamel interior finishing traffic green to ISC-267 of IS:5/2007 & IS:133(pt.- 1)/2013, with amndt. No. 1.
Three phase Submersible Pump set
SET OF SPARES FOR THE FRONT TYRE ASSEMBLY SUITABLE FOR GODREJ FORK LIFTER - CAP-03 T0N- MODEL-GX300D (ONE SET CONTAINS FOLLOWING ITEMS) 1- TYRE SOLID BLK 26"-660MM, W-310MM (7X12") -QTY-4 NOS 2-WHEEL BOLT HT M14 41MM FULL 1.5MM -QTY-7 NOS 3-SPRING WASHER MS IS 3063 M14- QTY-7 NOS 4- WHEEL FLANGE NUT MS M14 1.5MM -QTY-7 NOS 5-WHEEL NUT
SET OF SPARE FOR THE BRAKING SYSTEM OF