Madhya Pradesh Poorv Kshetra Vidyut Vitran Tender Results

Class Room Desking and Seating Experience with Gov. Required 2 Year (s) Class Room Desking And Seating ( 36 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING ONLY TABLE/DESK ONLY TABLE DESK, ONLY SEATING, INTEGRATED DESK CUM SEATING, INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK, ONLY TABLE/DESK WITH SHELF/STORAGE UNDER DESK Desking Configuration SINGLE SEATER SINGLE SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 750 750, 800, 850, 1000, 105 0, 1100, 1150, 1200, 125 0, 1300, 1350, 1400, 145 0, 1500, 1550, 900, 940, 4 70, 920, 960, 1375, 1800, 1830, 1860, ONLY SEATING NO DESK, 600 DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 18 mm thick prelaminated Particle Board 18 mm thick prelaminated Particle Board Material of Support Structure or Side Mild Steel square Section of size 25x25 SS 202 STRUCTURE, SS 304 1/6 Pannel mm and wall thickness minimum 1.6 mm STRUCTURE, WOODEN STRUCTURE, TEAK WOOD STRUCTURE, Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm, Side Panels of 18 mm Prelaminated MDF board coforming to Designation PLMDF-23 of IS 1487-1998 and all plane sides edge banded with PVC tape of 2 mm thickness with the help of hot melt glue, 19m mthick Commercial Block Board BWP grade Conforming to IS 1659, 38mm thick Commercial Block Board BWP grade Conforming to IS 1659, 19mm thick Decorative Block Board BWP grade Conforming to IS 1659, 38mm thick Decorative Block Board BWP grade Conforming to IS 1659, 19mm thick Commercial Block Board MR Grade Conforming to IS 1659, 38mm thick Commercial Block Board MR Grade Conforming to IS 1659, 19mm thick Decorative Block Board MR Grade Conforming to IS 1659, 38mm thick Decorative Block Board MR Grade Conforming to IS 1659, 18mm thick teak wood, 18mm thick teak carved wood, 18mm thick Other wood, ONLY 2/6 SEATING NO DESK, 60mm x 35mm x 1.2mm thick CRC capsule pipe frame Height of Desk Top in mm (±5 mm) 750 750 Width of Desk Top in mm (± 5 mm) 450 450 SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) 18 mm thick prelaminated Particle Board 12 mm Thick Plywood Only, 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side, 18 mm thick prelaminated Particle Board, 25 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, 19mm thick Commercial Block Board BWP grade Conforming to IS 1659, 25mm thick prelaminated plywood having 0.8 mm (± 0.2mm) thick prelaminated sheet, ONLY DESK NO SEATING Material of Support Mild Steel square SS 202 STRUCTURE, SS 3/6 Structure Section of size 25x25 mm and wall thickness minimum 1.6 mm 304 STRUCTURE, Side Panels of 19mm thick Commercial Block Board BWP grade Conforming to IS 1659 and all plane sides edge banded with PVC tape of 2 mm thickness with the help of hot melt glue, Side Panels of 19mm thick Commercial Block Board BWP grade Conforming to IS 1659 and all plane sides edge banded with CP Teak Wood Lipping, Side Panels of 19mm thick Decorative Block Board BWP grade Conforming to IS 1659 and all plane sides edge banded with PVC tape of 2 mm thickness with the help of hot melt glue, Side Panels of 19mm thick Decorative Block Board BWP grade Conforming to IS 1659 and all plane sides edge banded with CP Teak Wood 4/6 Lipping, Side Panels of 19mm thick Commercial Block Board MR grade Conforming to IS 1659 and all plane sides edge banded with PVC tape of 2 mm thickness with the help of hot melt glue, Side Panels of 19mm thick Commercial Block Board MR grade Conforming to IS 1659 and all plane sides edge banded with CP Teak Wood Lipping, Side Panels of 19mm thick Decorative Block Board MR grade Conforming to IS 1659 and all plane sides edge banded with PVC tape of 2 mm thickness with the help of hot melt glue, Side Panels of 19mm thick Decorative Block Board MR grade Conforming to IS 1659 and all plane sides edge banded with CP Teak Wood Lipping, ONLY DESK NO SEATING, 35mm x 20mm x 1.2mm thick CRC capsule pipe frame Material of Seat Cushion WITHOUT CUSHION WITHOUT CUSHION Width of Seating in mm (±10 mm) 400 400 Height of Seat in mm (±10 mm) 400 400, 460, 500, 550, 600, 6 50, 700, 750, 420, 44 0, 370 Width of backrest if provided in mm (± 5 mm) 430 200, 220, 240, 260, 270, 2 80, 300, 325, No Backrest, 370, 430 Back Support for Seating of Same materail as Seating Provided without cushion Provided with Cushion, Provided without cushion, back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC NO - 5/6 -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) Colour of finish As per buyer's choice - Desk top finishing All sides Edge to be banded with PVC tape of 2 mm thick with help of hot melt glue - Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) 300 - WARRANTY Warranty period in number of years 1 1 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chandra Sahu 482008, O/o EE (Area Store), Nayagaon, Rampur, MPPKVVCL, Jabalpur, 36 15 EMD Required No ePBG Required No

revolving chair Experience with Gov. Required 2 Year (s) Revolving Chair ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt central tilt Tilt Tension Adjustment false - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm Arm With With Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Fixed Colour of Fabric for Seat and Backrest RED - Ergonomic Seat Design true Back type push back push back Backrest is made of two pcs injection Backrest is made of one piece injection - 1/5 moulded frame moulded frame backrest has separate adjustable headrest false Seat type fixed fixed Seat is curved false - Locking mechanism true - Type of locking N.A - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon 2/5 Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Proypylene steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric PU Foam covered with Fabric Density of PU foam used in seat KG per Cu Meter (+/- 3) 40 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 - Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram - DIMENSION Overall Chair Height ±15mm 890 As per GeM Catalogue. Backrest Height ±15mm 430 As per GeM Catalogue. Backrest Width ±10mm 410 410, 440, 480, 500, 520, 5 50, 650, 680, 700, 720 3/5 Seat Height ±15 mm 450 450 Seat Width ±10 mm 440 440 Seat Depth ±10 mm 400 400.0 Thickness of M S Plate Joining the under structure with Seat 1.2 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 620 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 35 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year CERTIFICATION Test reports to be furnished to buyer on demand NO YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/5 1 Ramesh Chandra Sahu 482008, O/o EE (Area Store), Nayagaon, Rampur, MPPKVVCL, Jabalpur, 20 15 Required No ePBG Required No

Modular Work Stations/Modular Staff Office Packages Experience with Gov. Required 2 Year (s) Modular Work Stations/Modular Staff Office Packages ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values SELLING UNIT Selling unit Order Quantity is number of Pieces Clusters of specified number of seats. (Price given is for full cluster module and not per seat) Order Quantity is number of Pieces Clusters of specified number of seats. (Price given is for full cluster module and not per seat) GENERIC Type of system Tile based system (shape fit tiles) Tile based system (shape fit tiles) Type/Shape of cluster Single Seater Rectangular Cluster Single Seater L Shape Cluster, Single Seater Rectangular Cluster, Double Seater C shape Cluster with Curvilinear Top, Double Seater T shape Cluster with Curvilinear Top, Double Seater Rectangular shape Cluster with Side By Side sitting, Double Seater Rectangular shape Cluster with Back to Back sitting, Four Seater H 1/5 Shape Cluster with Curvilenear Top, Four Seater Plus Shape Cluster with Curvilenear Top, Four Seater Rectangular Cluster with Straight Line Side by Side Sitting, Four Seater Rectangular Cluster with 2 X 2 Opposite Sitting Wire Management for electric switch Skirting race-way - Foot edge of table top Flat with PVC lipping - Plain edge banded with 2mm PVC tape - Construction of drawer unit All wood pedestal Flat metal front, Wooden front with PVC lipping, Wooden front post form, All wood pedestal, Full Metal, Wooden front with teak wood lipping Construction of pedestal Free standing full height with castor Top supporting, Free standing full height with castor, free standing low height with castor Type of pedestal two drawer and one filer - Locking system of pedestal Center locking - Work top support Gable end made of prelaminated particle board Gable end made of prelaminated particle board Type of Drawer unit Moveable with castor whees - MATERIAL Frame material for work station Alluminium Alloy Powder Coated Extruded Aluminium Sections, Alluminium Alloy Material of table top Prelaminated particle board Prelaminated particle board Material of tiles for top fabric tackable plus fabric magnetic plus white board Fabric tackable-fabric upholstered metal tile with PE foam, fabric magnetic - fabric upholstered metal tile, white board made of decorative laminate with white glossy, high 2/5 pressure laminate, laminate, glass writing board plus back painted sandwich glass tiles, fabric tackable plus fabric magnetic plus white board, fabric tackable plus fabric magnetic plus glass writing board Material of intermediate tiles laminate laminated block - 38mm thick paper honeycomb plus 3mm mdf on each side plus decorative laminate, fabric tackable - fabric upholstered metal tile with PE foam, fabric magnetic fabric upholstered metal tile, high pressure laminate, glass writing board - back painted sandwich glass tiles, fabric tackable plus fabric magnetic plus glass writing board, Pre laminated board Material of bottom tiles prelaminated particle board tile Material tile powder coated, prelaminated particle board tile, Commercial Block Board BWP grade tile, Decorative Block Board BWP grade tile, Commercial Block Board MR Grade tile, Decorative Block Board MR Grade tile Overhead Storage Provided No Overhead Storage - DIMENSION Length of table top (main frame) ±10 mm(main frame) 1200 mm 1200 mm Length of table top (Return Frame)± 10mm NA FOR RECTANGULAR 900 mm, 1050 mm, 1200 mm, 1350 mm, 1500 mm, 1650 mm, 1800 mm, NA FOR 3/5 RECTANGULAR, 915 mm, 1220 mm Depth of table top ± 10mm 600 mm 600 mm Height of table top ±10mm 750 mm - Thickness of table top ±2mm 25 mm - Overall height of work station partition ±10mm 1200 mm 1200 mm Thickness of side partition/panel ±2mm 60 mm As per GeM Catalogue. Thickness of main frame ±5 mm 60 mm 60 mm Size of drawer unit ( WidthXDepthXHeigh t) ±10mm 390 X 440 X 147 (mm) 390 X 440 X 147 (mm), 390 X 590 X 147 (mm), 450 X 440 X 147 (mm), 450 X 590 X 147 (mm), NO DRAWER UNIT, 390 x 440 x 160 (mm) Size of file box (Widt hXDepthXHeight) ±10mm 390 X 440 X 296 (mm) 390 X 440 X 296 (mm), 390 X 590 X 296 (mm), 450 X 440 X 296 (mm), 450 X 590 X 296 (mm), NO FILE BOX, 390 x 440 x 260 (mm) FINISH Powder coating thickness of frame 50 micron - CERTIFICATION Test reports to be furnished to buyer on demand YES - BIFMA level-3 YES - OEM of offered product is ISO 9001:2015 certified YES - OEM of offered product is ISO 14001:2015 certified YES - OEM of offered product is ISO 18001:2007 certified YES - Green guard certification YES - WARRANTY Warranty period in number of years 1 1 4/5 INSTALATION COMMISSIONING INSTALLATION COMMISSIONING The price includes the cost of installation and commissioning of the entire unit at consignee site (excluding the cost of Civil Work which would be got done by the Consignee at his own cost as per design and layout plan provided by the seller). The price includes the cost of installation and commissioning of the entire unit at consignee site (excluding the cost of Civil Work which would be got done by the Consignee at his own cost as per design and layout plan provided by the seller). * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chandra Sahu 482008, O/o EE (Area Store), Nayagaon, Rampur, MPPKVVCL, Jabalpur, 20 15 Required No ePBG Required No

plastic moulded chair Experience with Gov. Required 2 Year (s) Plastic Moulded Chair ( 60 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE SINGLE PIECE PLASTIC MOULDED, PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE, SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE Seat cushion With With Back Cushion With With Conformity to Indian Standard IS 13713- Latest true - Plastic Material FILLED THERMOPLASTI C, UNFILLED THERMOPLASTIC, FILLE D THERMOSETTING PLASTIC, UNFILLED THERMOSETTING PLAS TIC, POLYPROPELENE, PV C (Polyvinyl Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) FILLED THERMOPLASTI C, ABS PLASTIC (Acylonitrile Butadiene Styrene) 1/3 ARMS With arms With arms DIMENSION & WEIGHT Seat Width in mm (+/- 5 mm) 345, 365, 385, 400, 415, 4 25, 455, 475, 500, 510, 52 0, 530, 540, 550, 560, 570 560 Seat Depth in mm (+/- 5 mm) 340, 360, 380, 410, 4 20, 430, 440, 450, 460, 47 0, 480, 490, 520, 560 450 Chair Height in mm (+/- 10 mm) 500, 750, 770, 7 90, 805, 825, 840, 850, 87 0, 890 850 Chair Dimensions Conforming To IS 3663 (Latest) - Weight of Chair (IN Grams) 650 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 40, 45, 50, 55, 60, 65, 70, 7 5, No Cushion 40 Density of PU Foam in KG per CuM 40, No Cushion 40, No Cushion Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) 40, No cushion 40 PERFORMANCE Stability of the Chair Conforming To IS 5416 (Part 2) - Strength of the Chair Conforming To IS 5416 (Part 1) - Maximum Ash Content is Not more than 1% in Conformity test as per Annex D of IS: 14887 (Latest) Complied that Ash content is less than 1% - UV Resistance Test - % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table 1- Cycle Number 2 is more than 50 % Complied Minimum 50% tensile strength retained after exposure as per test - Support/Under Structure Support/Under Structure SS 202 STRUCTURE, SS 304 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Sigle Moulded Piece No Support Structure SS 202 STRUCTURE, Sigle Moulded Piece No Support Structure 2/3 Support Structure Finishing Stove enameled Paint, Powder coated, chrome, epoxy polyester, synthetic enamel, Natural Steel Finish, Sigle Moulded Piece No Support Structure Stove enameled Paint, Sigle Moulded Piece No Support Structure CERTIFICATION Test reports to be furnished to buyer on demand YES - MISC Colour RED, Black - WARANTEE PERIOD WARANTEE PERIOD IN NUMBER OF YEARS 1 1 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chandra Sahu 482008, O/o EE (Area Store), Nayagaon, Rampur, MPPKVVCL, Jabalpur, 60 15 EMD Required No ePBG Required No

Restaurant Table

almirah- Steel Experience with Gov. Required 2 Year (s) Almirah- Steel ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest false - No of shelves (Nos) 4 - Type of Shelves Fixed - Locker Provided false - Locking System with the locker NA - Cloth hanging provision in the Almirah false - Number of Doors (Nos) 2 - Door Stiffner upto full door height Provided with the almirah doors true - Number of Hinges with each door (Nos) 3 - Number of Glass Sheet fixed in each Almirah door (Nos) 4 - Construction Welded - Lock Three Way bolting device controlled by - 1/3 lock MATERIAL Material M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame Sheet Thickness of Locker 0.8 mm - Length of Glass Sheet ±10 (mm) 780 mm - Width of Glass Sheet ±10 (mm) 230 mm - Sheet Thickness of door in mm 0.8 mm (Minimum) - Sheet Thickness of sides, back, Top and Bottom 0.8 mm (Minimum) - Sheet Thickness of Shelves 0.8 mm - Sheet Thickness of Pedestal in mm 0.8 mm (Minimum) - Material of Lock steel - Material of Keys steel - DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1855 1855 Width in mm (± 7 mm) 910 760, 910, 1023, 700 Depth in mm (±5 mm) 480 430, 455, 480, 486, 270, 3 70, 400 Inside Height of Locker in mm (± 5 mm) N.A - Inside Width of Locker i mm (±5 mm) N.A - Inside Depth of Locker in mm (±5 mm) N.A - Width of Stiffner in mm (±5 mm) N.A - 2/3 Thickness of MS Sheet of Stiffner (in mm) N.A - Stiffened Pedestal height in mm (±2 mm) 130 - Pedestal Width in mm (±2 mm) 70 - COLOUR & FINISH Finish Synthetic enamel - Colour of Paint ash gray - Packing: Corrogeted Paper Packing - CERTIFICATION ISI marked false - CM/L No. - - WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chandra Sahu 482008, O/o EE (Area Store), Nayagaon, Rampur, MPPKVVCL, Jabalpur, 20 15 EMD Required No ePBG Required No

medical stools or chairs Experience with Gov. Required 2 Year (s) Medical Stools Or Chairs ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values Material and shape of Stool Material of Back rest NA Material of cushion NA Cushioning in the stool Top Without cushion with Cushion, Without cushion Finish SS Design of Back rest NA Back rest support Frame Material NA No of Legs in the under structure 5 Foot rest Without With, Without Shape of stool top Round - Material of Top Stainless Steel Stainless Steel Covering material of cushion NA - Leg shoe Material NA Painting Stove enamel Stove enamel, Powder coating, Polishing, Other s Density of Cushion NA 1/3 (Kg/cub metre) Type of Stool Revolving Revolving Material of Under Structure SS Back rest Without Without Dimensions Adjustable Height true Normal Height (mm) 950 Back rest height (mm) 0 Min. Height (mm) 800 Diameter/Side length of Top (mm) 508 Thickness/Size of Under structure Frame (mm) 1.02 Thickness of cushion (mm) NA Max. height (mm) 1000 1000 Back rest Thickness (mm) 0 Stool Top base Thickness (mm) 1.0e-06 Over all width/Diameter (mm) 508 Drawing and product code Drawing No. available on web false - Drawing No. NA - Product Code No. SAI-MS-14487 - Product Code available on web true - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chandra Sahu 482008, O/o EE (Area Store), Nayagaon, Rampur, MPPKVVCL, Jabalpur, 20 15 EMD Required No ePBG 2/3 Required No

almirah- Steel Experience with Gov. Required 2 Year (s) Almirah- Steel ( 9 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest true - No of shelves (Nos) 4 - Type of Shelves Fixed - Locker Provided true - Locking System with the locker YES - Cloth hanging provision in the Almirah false - Number of Doors (Nos) 2 - Door Stiffner upto full door height Provided with the almirah doors true - Number of Hinges with each door (Nos) 2 - Number of Glass Sheet fixed in each Almirah door (Nos) N.A - Construction Welded - Lock Three Way bolting device controlled by - 1/3 lock MATERIAL Material M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet Sheet Thickness of Locker 1.0 mm - Length of Glass Sheet ±10 (mm) N.A - Width of Glass Sheet ±10 (mm) N.A - Sheet Thickness of door in mm 1.24 mm - Sheet Thickness of sides, back, Top and Bottom 1.0 mm - Sheet Thickness of Shelves 1.0 mm - Sheet Thickness of Pedestal in mm 1.0 mm - Material of Lock steel - Material of Keys steel - DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1155 1155 Width in mm (± 7 mm) 760 760.0 Depth in mm (±5 mm) 455 455.0 Inside Height of Locker in mm (± 5 mm) 370 mm - Inside Width of Locker i mm (±5 mm) 455 mm - Inside Depth of Locker in mm (±5 mm) 455 mm - Width of Stiffner in mm (±5 mm) 125 mm - Thickness of MS Sheet 0.8 mm - 2/3 of Stiffner (in mm) Stiffened Pedestal height in mm (±2 mm) 120 - Pedestal Width in mm (±2 mm) 80 - COLOUR & FINISH Finish powder coated - Colour of Paint steel gray - Packing: Bubble Sheet - CERTIFICATION ISI marked false - CM/L No. - - WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 5 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chandra Sahu 482008, O/o EE (Area Store), Nayagaon, Rampur, MPPKVVCL, Jabalpur, 9 15 EMD Required No ePBG Required No

almirah- Steel Experience with Gov. Required 2 Year (s) Almirah- Steel ( 17 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest true - No of shelves (Nos) 5 - Type of Shelves Fixed - Locker Provided false - Locking System with the locker NA - Cloth hanging provision in the Almirah false - Number of Doors (Nos) 2 - Door Stiffner upto full door height Provided with the almirah doors true - Number of Hinges with each door (Nos) 1 - Number of Glass Sheet fixed in each Almirah door (Nos) N.A - Construction Welded - Lock Three Way bolting device controlled by - 1/3 lock MATERIAL Material M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet Sheet Thickness of Locker N.A - Length of Glass Sheet ±10 (mm) N.A - Width of Glass Sheet ±10 (mm) N.A - Sheet Thickness of door in mm 1.0 mm - Sheet Thickness of sides, back, Top and Bottom 1.0 mm - Sheet Thickness of Shelves 1.0 mm - Sheet Thickness of Pedestal in mm 1.0 mm - Material of Lock Brass and steel finish - Material of Keys keys made of MAZAK ZAMAK having nickle plated finish - DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1800 1800 Width in mm (± 7 mm) 910 910.0 Depth in mm (±5 mm) 480 480.0 Inside Height of Locker in mm (± 5 mm) N.A - Inside Width of Locker i mm (±5 mm) N.A - Inside Depth of Locker in mm (±5 mm) N.A - Width of Stiffner in mm (±5 mm) N.A - 2/3 Thickness of MS Sheet of Stiffner (in mm) 0.9 mm - Stiffened Pedestal height in mm (±2 mm) 120 - Pedestal Width in mm (±2 mm) 80 - COLOUR & FINISH Finish Synthetic enamel - Colour of Paint ash gray - Packing: Bubble Sheet - CERTIFICATION ISI marked false - CM/L No. - - WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 3 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chandra Sahu 482008, O/o EE (Area Store), Nayagaon, Rampur, MPPKVVCL, Jabalpur, 17 15 EMD Required No ePBG Required No

video conferencing end point full high definition for groups Video Conferencing End Point Full High Definition For Groups ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type of End Point Full High Definition Video Conferencing Point to Point upgradable Point to Point, non upgradable, Point to Point upgradable, 1+3 Multiparty Full HD End Point, 1+5 Multiparty Full HD End Point, 1+7 Multiparty Full HD End Point, 1+8 Multiparty Full HD End Point, 1+9 Multiparty Full HD End Point Does it require mandatory registration with MCU NA - Video Conferencing System Resolution End point based Full HD(1080p, 60) - Minimum Bandwidth Required for Specified video quality at End point/far-site end (Mbps) 1.5 - The End Point is a point to point system upgradable to Multiparty Video Yes - 1/6 conferencing with full high definition camera and codec for simple installation with a TV LED/LCD display suitable for specified bandwidth of IP network through RJ-45 connectivity: Type of sensor for 1920 x 1080p, in order to accept Full HD resolution video CMOS - Optical zoom 10X 3X, 4X, 5X, 10X, 12X, 20X, 30X, NA Digital zoom 2X - Field of View at zoom 80 - Pan range (Degree) 100 - Tilt Range (Degree) 20 - Cord and Connector to be supplied Yes - System delivers Full HD video and voice & Full HD content for an overall Full HD experience at specified bandwidth Yes - Video coding support Protocol H.263, H.264AVC, H.265 - System has G-722 G-711/G-729 or equivalent nt wideband audio coding support Yes - System supports sharing of Full HD video and graphics content during the video call Yes - System has live resolution of 1920 X 1080 and deliver Full High definition video at 30fps from 2 Mbps onwards Yes - It is possible to see both the near and far site on one Screen thus making most efficient use of a single display area Yes - System is equipped Yes - 2/6 with one or more Omni directional High Definition Microphones as required to cover large conference room Number of microphone supports 3 - Number of camera support from the same OEM 2 - Number of Ethernet connection points for System supports for RJ-45, 10/100/1000 Mbps Base-T Ethernet connection 1 - System supports AES encryption video calls; System has Encryption On and Off capability Yes - Video Codec shall support 16:9 format for supporting LCD/LED display unit and PAL NTSC video standard Yes - Power supply: 230 + or - 10% volts, 50 Hz Yes - Shall come with easy to use infra-red hand held remote control with operating distance Yes - All equipment are in compliance with the requirements of ITU-T Standard related to Video Conferencing Yes - System to be IPv6 ready from day one Yes - System uses standards based protocols and the offered system is interoperable with any existing H-323 AVC/SVC based video conferencing equipment in a point to point call on the video conferencing end point; All Hardware and Software required to make it interoperable is included in the scope of Yes - 3/6 supply Minimum number of I/O ports ( 2 x DVI or 2 x HDMI or 2 x equivalent HD for Video output) 2 - Minimum number of ports (1 x HDMI or equivalent for Main Camera) 2 - Minimum number of ports (1 x DVI or 1 x HDMI or USB 3 or higher for PC connectivity) Yes - Recording @1080p on the end point No - System is supplied complete with the following components from the same OEM : (a) Full HD Codec (b) Full High Definition Camera (c) At least one Omni Directional Microphones with suitable connectivity (d) Remote Control (e) Data sharing capability using hardware or software (f) All cables necessary for above features Yes - System is also tropicalized and report available from ILAC/NABL/Govt Lab with all add on if being supplied to buyer as per following requirement (a) Dry Heat Test : For 16 hour at a temperature of 55 degree C in accordance with IS:9000/part-3/sec tion-5/1977 (Reaffirmed 2007) (b) Cold Test : For 4 hour At a temperature of 0 degree C in accordance with IS:9000/part-2/sec tion-4/1977 (Reaffirmed 2007) (c) Damp Heat Test : For 2 Cycles of 24 h each at Yes - 4/6 a temperature of 40 degree C & 95% RH in accordance with IS:9000/part- 5/section-1/1991 (Reaffirmed 2007) After each environmental test and a recovery period of two hours, the video conferencing system has been checked for complete functional parameters, and the results found satisfactory Type Test Report from ILAC/NABL/Govt lab confirming conformance to above technical specifications - to be made available to buyer Yes - BIS Registration under CRS of Meity NA - BIS Registration Number and its Validity - - UL/CE certification Yes - if yes, UL/CE certificate Number (Furnished when demanded by buyer ) - - Operating temperature Range (Degree C) (20) to 60 - Operating humidity (%RH) 10%-90% - Free installation and commissioning Yes - On Site OEM Warranty (Year) 5 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chandra Sahu 482008, O/o EE (Area Store), Nayagaon, Rampur, MPPKVVCL, Jabalpur, 3 30 Advisory Bank HDFC Bank 5/6 EMD Percentage(%) 1.00 EMD Amount 19869 ePBG Advisory Bank State Bank of India ePBG Percentage(%) 2.00 Duration of ePBG required (Months). 60

computer servers, Storage System, SAN Switch Computer Servers ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Form Factor Rack - Size (RU) 2 - Processor Make Intel - Max. Number of sockets available on chipset 2 - Max. Number of sockets populated with processor 2 - Number of core per Processor 16 - Processor Configuration Intel Xeon Gold 6130 (2 .10GHz/16-core/22MB/1 25W) - Chipset compatible with CPU C 621 - Availability of Co- Processor No - If Yes Co-Processor Configuration NA - PCI Slots (Express Gen 3.0) 8 - 1/12 Type of RAM DDR4 - RAM Size (GB) 512 - RAM upgradable upto (GB) 3000 - DIMM Slots (No.) 24 - Type of Hard Disk Drive SAS - Hard disk drive Capacity (GB) 1200 - Hard disk drive Speed (RPM) 10K - RAID Controller Cache (MB) 2048 - RAID Type 1 - RAID Controller Ports @12 Gbps 8 - Video Controller (support VGA or above resolution) Yes - Keyboard No - Mouse No - Bays (min. 2 internal or more hot plug) 8 - USB Ports (version 2.0/3.0) 4 - Certifications, Compliance support by Windows, Red Hat or Novell. or Oracle Cluster S/W Yes - DVD ROM (or better) 8x or better - Network Card Supported 1G, 10G, 40G - FC HBA Dual port card Available - FC HBA Dual port card Speed 16 - Power Management Screen blanking, hard disk & system idle mode in power on, set up password, power supply surge protected, automatic server reboot. - Redundant Power Supply Yes - Redundant Fan Yes - 2/12 Total No of Ports 2No 1G Ports + 4No of 10G SFP - Declare SPEC int_rate_base 2006 & specfp_rate_2006 for 1, 2, 4, 8 prcessor as applicable. NA - Server scalability to be achieved within the box without adding nodes NA - RoHS Compliance Yes - BIS Registration number & its Validity R-67000043 - Max. power consumption of the system (Watt) 750 - Availability of Type test reports consisting of verification of all the features & functional parameters & environmental tests sequences as under: a Dry heat test (For 16 hrs at a temperature of 45 degree C in accordance with IS: 90 00/part-3/section-5/197 7) b Cold test(For 4 hrs at a temperature of 0 degree C in accordance with IS: 9000/part-2/sec tion-4/1977 c Damp Heat Cyclic Test ( For 2 cycles of 24 hrs at a temperature of 40 degree C & 95% RH in accordance with IS: 90 00/part-5/section-1/198 1) Note:- The server shall be checked for all the parameters before conditioning, After completion of the above environmental tests sequence, with a recovery period of 1 to 2 hrs, the server shall be functional No - Name address of Lab NA - Test Report No. date NA - 3/12 Power Supply 230 V +/-10%, 50 Hz - On Site OEM Warranty (years) 5 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chandra Sahu 482008, O/o EE (Area Store), Nayagaon, Rampur, MPPKVVCL, Jabalpur, 4 30 Storage System ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Storage System Type SAN SAN, Enterprise SAN, Unified Storage Group2 Storage Capacity (TB) 30 30.0 Group3 Hardware Form Factor of Storage System (RU) 2 - Disk Disk Type SAS SAS Speed of dual ported disk drive in Gbps 12 - Total Numbers of Drive Slots 24 - Total no of drive slot populated with SSD 0 - Total no of drive slot populated with Flash Drive 0 - Total no of drive slot populated with SAS 18 - Total no of drive slot populated with NL-SAS 0 - Drive Type Wise Storage Capacity of System in GB 2400 - Automated Storage tiering feature across the populated Drives types( in case of multiple drive system) Yes Yes, No 4/12 Automated Storage tiering Software License Included Yes - Hot Spares true - Number of Populated Disks per Hot Spare 17 - Provision for additional Capacity Yes - If Yes, Number of Drive Slots available to achieve additional capacity 6 - Connectivity/Port Type of Front end Ports FC, ISCSI - Number of Front end Ports 8 - Speed of front end Ports in Gbps 16 Type of Back end Ports SAS - Number of Back end Ports 4 Speed of Back end ports in Gbps 12 Number of Remote Replication Ports( FC/Ethernet) 4 - Controllers Number of Controllers/VSD Node available in the storage System 2 Active-Active Controllers Configured in HA true - Active Stand by Controller Configured in HA false - System Cache Cache Availability Type Global Global, Federrated, NA Total Configurable Cache (GB) 32 Group4 Wide Stripping or equivalent feature true - Group5 No of Snapshot Copies Per Volume 255 - License for Snapshot included Yes - Data Replication Remote Replication Yes - 5/12 Remote Replication license included Yes - Synchronized Replication Support Yes - Synchronous Replication license included Yes - Asynchronous Replication Support true - Asynchronuos Replication license included Yes - 3-DC Zero Data Loss Support No - If Yes, Supported Replication Topology for 3-DC Zero Data Loss NA - Group6 Type of Data Compression NA - Type of Data Deduplication NA - No Single point of Failure with Non- Disruptive replacement of Hardware Yes - The Storage provide Non disruptive Firmware/Microcode upgrade Yes - Firmware upgrade without any controller reboot Yes - Encryption Mode Encryption Required true - Type of Data at Rest Encryption HW Controller Based - Group7 Storage management software for configuration and multi- pathing(part of the supply). YES - Group8 Multi-pathing and load balancing and fail over software (part of supply) with license for windows/Linux servers or shall support native multipathing of OS. YES - 6/12 Group 9 Protocols Supported by the storage system from day one FC, iSCSI - Group 10 Operating System Platform and Clustering Supported by the Storage from day one Linux Kernel - Group11 Operating Temp Range 10-35 - Group12 Storage Temp Range 10-50 - Group13 Operating Humidity (Rh) 20-80 - Group14 Storage Humidity (Rh) 10-90 - Group15 BIS Registration under CRS of MeiTY true - If Yes, BIS Registration No under CRS of MeiTY otherwise indicate N/A R-41006149 - BIS Registration Certificate shall be furnished when demanded by the buyer true - Group16 Storage System is compliant with IPv6 true - Group17 Group18 Scope of Supply It includes installation, commissioning & integration togather with all necessary software to make the system fully functional as intended. - Group19 On Site OEM Warranty 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chandra Sahu 482008, 1 30 SAN Switch ( 2 ) Technical Specifications 7/12 Specification Specification Name Values Allowed Values General Specification Fibre Channel Generation 16Gbps - Switch Type Chassis - Fibre Channel base ports 24 - POD License 12 port - POD License Quantity 1 - Scalability (Ports) 24 - Fibre Channel Port Speed (Gbps) 16 - QSFP (FCoE)port NA - Media Type Fibre Channel SWL - Autosensing (Gbps) 4/8/16 - FCIP ports 0 - IP Port speed (Gbps) NA - Media Type, IP NA - FCIP performance (GbE) NA - Aggregate Switch Bandwidth FC (end to end full duplex) 384 Gbps - Aggregate Switch Bandwidth IP (end to end full duplex) (Gbps) NA - Maximum Fabric Latency (nano second) Locally switched port latency (nano second) 700 - Blade-to Blade Latency (microsecond) NA - Maximum Frame Size 2112-byte payload - Maximum IP MTU size NA - Frame Buffers 8192 in Gen5 - Class of service Class F - Port Types U/E/F/M/D/EX - Access Gateway Mode Support/NPIV support NA - Form factor (U) 1U - AC Power Supply Dual Redundant Hot Swappable AC Power Supply - 8/12 Support for DC Power Supply No - Airflow Front-to-back airflow - Non Blocking Architecture NA - Redundant Control Processors/Data Processor NA - Redundant active/active core switching blades NA - Redundant WWN cards NA - Total slots per chassis NA - Number of Blade Modules Required NA - Blade Module - 32 port with 16Gbps SWL SFP+ Blade Module 0 - Blade Module - 48 port with 16Gbps SWL SFP+Blade Module 0 - Blade Module - 64 port with 16Gbps QSFP+ Blade Module 0 - Blade Module - 48 port with 32Gbps SWL SFP+ Blade Module 0 - FCIP Blade Module 0 - FCIP Blade Connectivity Option (Gbps) NA - License Required ISL Trunking No - Real time Monitoring & Threshold alerts No - Extended Fabric No - Integrated Optional 10Gbps Fibre Channel for DWDM Connectivity NA - Enterprise License (Trunking, Real Time Threshold alerts, Extended Fabric) No - Centralized Management Software to manage and monitor multiple Fabrics within/across multiple sites from single NA - 9/12 window Bandwidth (Gbps/Tbps) for Interchassis connectivity NA - FCIP Trunking and Adaptive Rate Limiting NA - FICON Management Server NA - Advanced Accelerator for FICON NA - WAN Rate Upgrade License (Enables additional WAN-side throughput to 10 Gbps and unlimited with enablement of 40 GbE ports) NA - Supported Fabric Services ISL trunking No - In-flight compression No - In-flight encryption/IP Sec encryption No - Integrated optional 10 Gbps Fibre Channel connectivity No - VM Insight No - IO Insight No - Adaptive Networking with QoS No - Virtual Fabrics No - Extension Trunking NA - Adaptive Rate Limiting NA - FCIP Trunking NA - Optional Fabric Services include: Integrated Routing (FCR), FICON CUP, FICON Management Server, and Advanced Accelerator for FICON NA - Supported Security Features IPsec No - Miscellaneous Operating Temperature Range (Degree C) 0° to 40° C - Operating Humidity (RH%) 85 - Maximum Power 80 - 10/12 Consumption (Watt) BIS Registration Under CRS of Meity Yes - BIS Registration Number - - On Site OEM Warranty (Year) 5 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chandra Sahu 482008, 2 30 EMD Advisory Bank HDFC Bank EMD Percentage(%) 1.00 EMD Amount 98700 ePBG Advisory Bank State Bank of India ePBG Percentage(%) 10.00 Duration of ePBG required (Months). 36

Air Conditioner

patient care mattresses Experience with Gov. Required 2 Year (s) Patient Care Mattresses ( 36 ) Technical Specifications Specification Specification Name Values Allowed Values Dimensions Overall Length (mm, Feet) 1830 mm(6 feet) 1830 mm(6 feet) Overall Width (mm) 915 mm(3 feet) 915 mm(3 feet) Thickness of Mattress (mm) 75 mm +/-0.5% 75 mm +/-0.5% Features Material of Mattress poly urethane - Mattress with Sections YES - Fire Retardan, Anti Microbial and Water proof (as per IPX – 54 standard) properties of cover for Mattress Yes Yes Color of Cover Material Brown - Cover Material for Mattress FABRIC - Density of Material of Mattress in (Kg/m3) 35 Product details, Certifications Product Code available on Web false - 1/2 Product Code No. NA - Drawing No. available on Web false - Drawing No. NA - Availability Of Test Certificate From Govt Lab/NABL Or ILAC Accredited Lab For Firwe Retardant And Microbial Properties Of Cover Material Of Mattress true - Test certificate No. and Date ED -6251, 3.2.2017 - Name and Address of the Lab. where tested KURL ON KOLKATA - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chandra Sahu 482008, O/o EE (Area Store), Nayagaon, Rampur, MPPKVVCL, Jabalpur, 36 15 EMD Required No ePBG Required No

METAL BEDS Experience with Gov. Required 2 Year (s) METAL BEDS ( 36 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Structure of Metal bed frame including legs and head Structure SS 202 PIPE SS 202 PIPE Head board With - Shape of headboard rectangular - MATERIAL Size of Rectangular Hollow section ±1(mm) 50 mm X 25 mm 50 mm X 25 mm Size of Square Hollow Section ±1(mm) 32 mm X 32 mm 32 mm X 32 mm Size of Circular Hollow Sections ±1(mm) 25 mm 25 mm Thickness of Hollow Section in Structure (mm) 1.3 mm 1.3 mm Support Panel for placement of mattresses angle iron angle iron Thickness of support 1.5 mm 1.5 mm 1/3 Panel (in mm) Material of head board SS 202 - Material of mattress panel SS 202 PERFORATED SHEET - Thickness of mattress Panel ±1(mm) 16 mm - DIMENSION Over all length of Bed in mm (±10 mm) 1950 1950 Over all width of Bed in mm (±10 mm) 900 - Height of Bed in mm (±10 mm) 450 450.0 Size of support members in mm (±5 mm) 25 X 25 (mm) - COLOUR & FINISH Paint/Finish of M S parts Stove Enamel paint Powder Coating, Stove Enamel paint, NA Finish of head board stove enamel paint - Min Powder/paint coating thickness (Micron) 50 micron 50 micron, 60 micron, NA Colour of bed (steel Frame) gray - WARRANTY WARRANTY 1 year - CERTIFICATION Test reports to be furnished to buyer on demand YES - MISC Number of support members 4 4 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chandra Sahu 482008, O/o EE (Area Store), Nayagaon, Rampur, MPPKVVCL, Jabalpur, 36 15 EMD Required No ePBG Required No 2/3

chairs-office

revolving chair Experience with Gov. Required 2 Year (s) Revolving Chair ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt central tilt Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm Arm With With Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Fixed Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type fixed push back, fixed, height adjustable 1/5 Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame - backrest has separate adjustable headrest false Seat type fixed fixed, sliding Seat is curved true - Locking mechanism false - Type of locking tilt limitor - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 2/5 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material pu foam bonded chrome coted pu foam bonded chrome coted seat material PU Foam Covered With pure leatherite PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 40 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 - Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover leatherite leatherite GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram - DIMENSION Overall Chair Height ±15mm 1280 670, 710, 760, 810, 860, 8 90, 920, 950, 990, 1025, 1 050, 1080, 1125, 1140, 1 180, 1220, 1250, 1280, 1 310, 1330 Backrest Height ±15mm 800 460, 500, 520, 550, 570, 6 00, 730, 800, 410, 43 0, 650, 690 Backrest Width ±10mm 550 410, 440, 480, 5 50, 680, 700, 720 Seat Height ±15 mm 500 500 Seat Width ±10 mm 550 550 Seat Depth ±10 mm 500 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 1 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1, 1.2, 1.4, 1.6, 1. 8, 2, 2.2 Thickness of 15 mm 12 mm, 15 mm, 18 3/5 Plywood used in Seat ±1(mm) mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, 18 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 600 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm 50 mm Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 50 mm 50 mm WARANTEE Warrantee period in number of years 1-year 1-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chandra Sahu 482008, O/o EE (Area Store), Nayagaon, Rampur, MPPKVVCL, Jabalpur, 4 15 EMD Required No ePBG 4/5 Required No

Executive Table

revolving chair Experience with Gov. Required 2 Year (s) Revolving Chair ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt, push back central tilt Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm Arm With With Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Fixed Colour of Fabric for Seat and Backrest BLUE, black - Ergonomic Seat Design true Back type push back push back, fixed, height adjustable 1/5 backrest has separate adjustable headrest false Seat type fixed fixed, sliding Seat is curved false - Locking mechanism true - Type of locking upright locking - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels 2/5 Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material pressed and moulded plywood with polypropylene cover pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 40 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 - Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover Mesh Fabrics, leatherite foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram - DIMENSION Overall Chair Height 990 670, 710, 760, 810, 860, 8 3/5 ±15mm 90, 920, 950, 990, 1025, 1 050, 1080, 1125, 1140, 1 180, 1220, 1250, 1280, 1 310, 1330 Backrest Height ±15mm 460.0 460, 500, 520, 550, 570, 6 00, 730, 800, 410, 43 0, 650, 690 Backrest Width ±10mm 440.0 410, 440, 480, 5 50, 680, 700, 720 Seat Height ±15 mm 450 450 Seat Width ±10 mm 440 440 Seat Depth ±10 mm 460.0 460.0 Thickness of M S Plate Joining the under structure with Seat 0.4 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1, 1.2, 1.4, 1.6, 1. 8, 2, 2.2 Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm 50 mm Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 35 mm 25 mm, 30 mm, 35 mm, 45 mm, 50 mm, 55 mm, 60, 70, 120 WARANTEE Warrantee period in number of years 1-year 1-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered NO YES, NO 4/5 product is ISO 18001:2007 certified Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chandra Sahu 482008, O/o EE (Area Store), Nayagaon, Rampur, MPPKVVCL, Jabalpur, 2 15 EMD Required No ePBG Required No

Executive Computer Table