Loading
Loading…
Loading…
436 results • Latest
miniature circuit breakers Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Miniature Circuit Breakers ( 70 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Governing Indian Standard specification IS/IEC 60898-1:2002 Yes * Rated Current (Ampere) 40 A 40 A Instantaneous Tripping Range C C Rated Voltage (Volt) 240 VOLT 240 VOLT No of poles/Protected poles(PP) 1pole with 1PP 1pole with 1PP ISI marking Yes * CM/L No: - * CM/L Validity up to 31/12/2050 * CONSTRUCTIONAL Steel sheet enclosure for MCB of 1.2 mm Without * 1/3 thickness duly pretreated stove enamelled/powder coated Rated Short circuit capacity (Ampere) 10000 A * CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for each rating. yes * Test Report number - * Date of issue of Test Report by Laboratory - * Test Report to be furnished to the buyer on demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sandeep Thapa 250001, 19 J THE MALL MEERUT CANTT MEERUT 70 15
elecric bells and accessories Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Elecric Bells And Accessories ( 100 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:2268:1994 (Reaffirmed-2004) with latest amendments * Product ISI marked Yes Yes Type of bell Buzzer double coil Buzzer double coil CONSTRUCTIONAL Electrical Call bells and buzzers for indoor use Yes * FUNCTIONAL Operational Voltage Range (volts) Not exceeding 250 Volts * Power Requirements Electrically operated call bells and buzzers for indoor use, designed for connection to supplies at voltage not exceeding 250 V ac single phase 50 HZ * 1/3 Wattage (Watt) 10 * Maximum db level 70 * CERTIFICATIONS Availability of complete & satisfactory type test Report from Central govt/NABL ILAC accredited laboratory yes * Test certificate number - * Test report date - * Name of lab where test conducted - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sandeep Thapa 250001, 19 J THE MALL MEERUT CANTT MEERUT 100 15
miniature circuit breakers Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Miniature Circuit Breakers ( 60 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Governing Indian Standard specification IS/IEC 60898-1:2002 Yes * Rated Current (Ampere) 16 A 16 A Instantaneous Tripping Range C C Rated Voltage (Volt) 240 VOLT 240 VOLT No of poles/Protected poles(PP) 1pole with 1PP 1pole with 1PP ISI marking Yes * CM/L No: - * CM/L Validity up to 31/12/2050 * CONSTRUCTIONAL Steel sheet enclosure for MCB of 1.2 mm Without * 1/3 thickness duly pretreated stove enamelled/powder coated Rated Short circuit capacity (Ampere) 10000 A * CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for each rating. yes * Test Report number - * Date of issue of Test Report by Laboratory - * Test Report to be furnished to the buyer on demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sandeep Thapa 250001, 19 J THE MALL MEERUT CANTT MEERUT 60 15
miniature circuit breakers Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Miniature Circuit Breakers ( 60 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Governing Indian Standard specification IS/IEC 60898-1:2002 Yes * Rated Current (Ampere) 63 A 63 A Instantaneous Tripping Range C C Rated Voltage (Volt) 240 VOLT 240 VOLT No of poles/Protected poles(PP) 2 pole with 2 PP 2 pole with 2 PP ISI marking Yes * CM/L No: - * CM/L Validity up to 28/07/2018 * CONSTRUCTIONAL Steel sheet enclosure for MCB of 1.2 mm Without * 1/3 thickness duly pretreated stove enamelled/powder coated Rated Short circuit capacity (Ampere) 10000 A * CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for each rating. yes * Test Report number - * Date of issue of Test Report by Laboratory - * Test Report to be furnished to the buyer on demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sandeep Thapa 250001, 19 J THE MALL MEERUT CANTT MEERUT 60 15
miniature circuit breakers Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Miniature Circuit Breakers ( 60 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Governing Indian Standard specification IS/IEC 60898-1:2002 Yes * Rated Current (Ampere) 32 A 32 A Instantaneous Tripping Range C C Rated Voltage (Volt) 240 VOLT 240 VOLT No of poles/Protected poles(PP) 2 pole with 2 PP 2 pole with 2 PP ISI marking Yes * CM/L No: - * CM/L Validity up to 28/07/2018 * CONSTRUCTIONAL Steel sheet enclosure for MCB of 1.2 mm Without * 1/3 thickness duly pretreated stove enamelled/powder coated Rated Short circuit capacity (Ampere) 10000 A * CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for each rating. yes * Test Report number - * Date of issue of Test Report by Laboratory - * Test Report to be furnished to the buyer on demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sandeep Thapa 250001, 19 J THE MALL MEERUT CANTT MEERUT 60 15
LED Lamps- bulb Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 1 Year (s) LED Lamps- Bulb ( 1500 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 7Watt/700 lumens 7Watt/700 lumens Colour Temperature (K) 6500 2700, 4000, 5700, 6500 Type of Lamp CAP B22d B22d, E27 Warranty for free replacement (Years) 3 Years 3 Years Conformity to Indian Standard IS:16102 part I and Part II latest * FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 * LED Chip Efficacy (Lm/W) >/=130 * Colour Rendering Index(CRI) >/=80 * Beam Angle (Degree) >/=120 * 1/3 Power Factor >/=0.9 * Total Harmonics (%) </=15 * Driver Efficiency (%) >/=85 * LED chip Wattage (Watt) </=1 * Surge Voltage withstand (KV) 2.5 * Operating Voltage range (Volts) 100 Volt to 300 Volt * Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt * Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 * CONSTRUCTIONAL Light Source (as per LM80 orIS16106) 6500 k * LED Make crompton * Light Source (as per LM80/IS16106) SMD LED Chip * Lamp Shell material Polycarbonate * Ingress Protection in IP >/=20 * TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes * LED life test Certificate No. - * LED life Certificate Test Report Date - * LED lamp life certificate for 6000 hrs Yes * LED Lamp certificate Number - * LED Lamp Life Certificate date - * EMC Test Yes * Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes * Test certificate No. - * Test Report Date - * Name of lab where test conducted - * Complusory Yes * 2/3 Registration(CRS) of BIS for safety as per IS 16102-I * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sandeep Thapa 250001, 19 J THE MALL MEERUT CANTT MEERUT 1500 15
LED Lamps- bulb Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 1 Year (s) LED Lamps- Bulb ( 1500 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 5Watt/500 lumens 5Watt/500 lumens Colour Temperature (K) 6500 2700, 4000, 5700, 6500 Type of Lamp CAP B22d B22d, E27 Warranty for free replacement (Years) 2 Years 2 Years Conformity to Indian Standard IS:16102 part I and Part II latest * FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 * LED Chip Efficacy (Lm/W) >/=130 * Colour Rendering Index(CRI) >/=80 * Beam Angle (Degree) >/=120 * 1/3 Power Factor >/=0.9 * Total Harmonics (%) </=15 * Driver Efficiency (%) >/=85 * LED chip Wattage (Watt) </=1 * Surge Voltage withstand (KV) 2.5 * Operating Voltage range (Volts) 100 Volt to 300 Volt * Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt * Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 * CONSTRUCTIONAL Light Source (as per LM80 orIS16106) 6500 * LED Make crompton * Light Source (as per LM80/IS16106) SMD LED Chip * Lamp Shell material Polycarbonate * Ingress Protection in IP >/=20 * TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes * LED life test Certificate No. - * LED life Certificate Test Report Date - * LED lamp life certificate for 6000 hrs Yes * LED Lamp certificate Number - * LED Lamp Life Certificate date - * EMC Test Yes * Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes * Test certificate No. - * Test Report Date - * Name of lab where test conducted - * Complusory Yes * 2/3 Registration(CRS) of BIS for safety as per IS 16102-I * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sandeep Thapa 250001, 19 J THE MALL MEERUT CANTT MEERUT 1500 15
LED Lamps- bulb LED Lamps- Bulb ( 1500 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 12Watt/1200 Lumens 3Watt/300 lumens, 5Watt/500 lumens, 7Watt/700 lumens, 9Watt/900 lumens, 12Watt/1200 Lumens, 15Watt/1500 Lumens, 18Watt 1800 Lumens Colour Temperature (K) 2700 2700, 4000, 5700, 6500 Type of Lamp CAP E27 B22d, E27 Warranty for free replacement (Years) 3 Years 2 Years, 3 Years Conformity to Indian Standard IS:16102 part I and Part II latest * FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 * LED Chip Efficacy (Lm/W) >/=130 * Colour Rendering Index(CRI) >/=80 * 1/3 Beam Angle (Degree) >/=120 * Power Factor >/=0.9 * Total Harmonics (%) </=15 * Driver Efficiency (%) >/=85 * LED chip Wattage (Watt) </=1 * Surge Voltage withstand (KV) 2.5 * Operating Voltage range (Volts) 100 Volt to 300 Volt * Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt * Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 * CONSTRUCTIONAL Light Source (as per LM80 orIS16106) SMD LED CHIP * LED Make CROMPTON * Light Source (as per LM80/IS16106) SMD LED Chip * Lamp Shell material Polycarbonate * Ingress Protection in IP >/=20 * TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes * LED life test Certificate No. - * LED life Certificate Test Report Date - * LED lamp life certificate for 6000 hrs Yes * LED Lamp certificate Number - * LED Lamp Life Certificate date - * EMC Test Yes * Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes * Test certificate No. - * Test Report Date - * Name of lab where test conducted - * 2/3 Complusory Registration(CRS) of BIS for safety as per IS 16102-I Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sandeep Thapa 250001, 19 J THE MALL MEERUT CANTT MEERUT 1500 15
Executive Table
plastic moulded chair, revolving chair Plastic Moulded Chair ( 12 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR SINGLE PIECE PLASTIC MOULDED SINGLE PIECE PLASTIC MOULDED, PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE, SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE Seat cushion With With, Without Back Cushion With With, Without Conformity to Indian Standard IS 13713- Latest true * Plastic Material POLYPROPELENE FILLED THERMOPLASTIC, UNFILLED THERMOPLASTIC, FILLED THERMOSETTING PLASTIC, UNFILLED THERMOSETTING 1/8 PLASTIC, POLYPROPELENE, PVC (Polyvinyl Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) ARMS With arms With arms, Without arms DIMENSION & WEIGHT Seat Width in mm (+/- 5 mm) 560 * Seat Depth in mm (+/- 5 mm) 500 * Chair Height in mm (+/- 10 mm) 890 * Chair Dimensions Conforming To IS 3663 (Latest) * Weight of Chair (IN Grams) 4500 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 55 40, 45, 50, 55, 60, 65, 70, 75, No Cushion Density of PU Foam in KG per CuM 55 40, No Cushion GSM/Thickness of Fabric (Gram per Sq Meter) 120gsm 120gsm, 140gsm, 230gsm, 240gsm, N.A Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) 55 40, No cushion Fabric Material composition used for Cushion Cover N.A * PERFORMANCE Stability of the Chair Conforming To IS 5416 (Part 2) * Strength of the Chair Conforming To IS 5416 (Part 1) * Maximum Ash Content is Not more than 1% in Conformity test as per Annex D of IS: 14887 (Latest) Complied that Ash content is less than 1% * UV Resistance Test - % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table Complied Minimum 50% tensile strength retained after exposure as per test * 2/8 1- Cycle Number 2 is more than 50 % Support/Under Structure Support/Under Structure SS 202 STRUCTURE SS 202 STRUCTURE, SS 304 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Sigle Moulded Piece No Support Structure Support Structure Finishing Powder coated Stove enameled Paint, Powder coated, chrome, epoxy polyester, synthetic enamel, Natural Steel Finish, Sigle Moulded Piece No Support Structure CERTIFICATION Test reports to be furnished to buyer on demand YES * MISC Colour RED, Black * Colour/Pattern of Fabric for Seat and Backrest Cushions Red plain weave * WARANTEE PERIOD WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Harjinder Pal Singh 682001, Garrison Engineer (I) (CG) Kochi C/o DHQ 4, Indian Coast Guard Calvathy Road, Fort Kochi Kochi, Kerala-682001 12 15 Revolving Chair ( 4 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type knee tilt synchronic * Tilt Tension Adjustment true * 3/8 Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support Backrest With Adjustable Lumber Support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design true true, false Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking 3-Position Locking * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with 4/8 ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material aluminium covered with pu steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam 35 * 5/8 used in seat KG per Cu Meter (+/- 3) Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 * Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram * DIMENSION Overall Chair Height ±15mm 1140 * Backrest Height ±15mm 550 * Backrest Width ±10mm 550 * Seat Height ±15 mm 500 420, 450, 480, 500, 520 Seat Width ±10 mm 550 440, 520, 550, 460, 360 Seat Depth ±10 mm 550 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.8 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 600 * Thickness of 25 mm * 6/8 Polyurethane Foam Used in Seat in mm (+/- 2 mm) Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 25 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Harjinder Pal Singh 682001, Kerala-682001 4 15
All in one All In One ( 5 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Processor Processor Make Intel * Processor Generation 6th 6th Processor Intel Core i5-6500T (2.5 GHz, 6 MB cache, 4 cores) Intel Core i5-6500T (2.5 GHz, 4 cores), Intel Core i5-7500T (2.7 GHz, Intel Core i5-6500 (3.2 GHz, 4 Cores) Chipset Chipset Intel H110 * Graphics Graphics type Integrated * Graphic Card Description INTEL HD GRAPHICS 530 * Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 500 500, 1000 (or higher) 1/3 Hard disk drive speed (RPM) 7200 * RAM Type of RAM DDR4 * RAM Size (GB) 4 4 RAM Expandability Upto (GB) 32 32 Ram speed (MHz) 2133 * Operating System Operating system Windows 10 Professional Windows 10 Professional OS Certification Windows * Display Display Size (Inch) 20 20 Type of Display Non Touch Non Touch display resolution (Pixels) 1920 x 1080 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes * Ports USB Port 2.0 (No.) 4 * USB Port 3.0 (No.) 2 * VGA Port Not-Available * HDMI Port Not-Available * Thunderbolt Port (No.) 1 * Display Port Not-Available * Input Devices Keyboard Standard with USB Interface * Mouse Optical Scroll with USB Interface * Audio Integrated Stereo Sound with internal speakers & Mic. * Connectivity Wi-fi Connectivity 802.11 ac * Bluetooth Connectivity 4.0 or higher * LAN Port Integrated Gigabit Ethernet 10/100/1000 * Certification BIS Registration under CRS of Meity Yes * BIS Registration no - * Certifications Available BEE * 2/3 ROHS Compliance Yes * Power Maximum Wattage (Watts) 180 * Power Efficiency (%) Minimum 80 * Others Webcam HD * DVD R/W Available * Optical drive Integrated * Stand Standard * On Site OEM Warranty (Year) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Anup Kumar Sahoo 190004, HQ CE 31 Zone Opposite Govt GB Pant Hospital, Sonwar, BB Cantt 5 15
bib taps and stop valves cast copper alloy Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Bib Taps And Stop Valves Cast Copper Alloy ( 60 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Ungrouped Item Bib Tap Bib Tap Material of body and Bonnet Cast Brass Cast Brass Nominal Size (mm) 15 15 Finish Polished Bright Polished Bright, Cast Finish, Nickel- Chromium plated with coating thickness Not less than Service Condition Number 2 of table 3 of IS 1068/1993 Material of Gland, Crutch (handle), Washer Plate Brass (Extruded, Rolled, Cast, die cast) Leaded Tin, Bronze, Brass (Extruded, die cast) Shape of Shoulder at the Bonnet Hexagonal Hexagonal, Square 1/3 Minimum Weight of Item (gram) 350 * Conform to Indian Standard IS:781 Latest YES * ISI marked true true BIS Licence No - * Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES * Test Report No - * Test Report Date - * Name of the Lab - * Address of the Lab - * Test report to be furnished to the buyer on demand YES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nagabooshanam M 250001, E20 ROORKEE ROAD MEERUT CANTT MEERUT 60 15
sinks and wash basins-Vitreous China Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Sinks And Wash Basins-Vitreous China ( 5 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS: 2556 (Part - 4) Latest IS: 2556 (Part - 4) Latest Pattern Flat Back Flat Back Type of Tap hole Semi punched * Connecting Dimensions (strictly as Per Table 3 and Table 4 of IS 2556- Part 4) Yes * CONSTRUCTION Overall length (cm) (±10) 60 60 Overall Breadth (cm) (±10) 40 40 Overall Heigth (cm) (±10) 40 40, 60, 80, 100, 120 Soap Place With * No. of Tap holes 1 * 1/3 Construction One piece * Colour White * Overflow slot Without * Rag bolt Provision true * Bottle Trap Without With, Without Weight of the Basin (Complete Unit) (Grams) (±500) 2000 * Waste Hole (64 mm Flange) Yes * Chain Stay Hole Without * Combined Overflow Without * Nuts Bolts and Fixing Bracket/Support Accessories are part of Supply YES * Shape Round Round, Square, Rectangle, oval, Pentagonal, Semi Circle, Quarter Circle Height of the Pedstal (cm) (±10) No Pedastal 80, No Pedastal PERFORMANCE Fixing Arrangement Wall Hung Bracket Stud, Wall Hung CERTIFICATION Availability of Test Reports from Central Govt./NABL/IL AC acredited Lab to prove conformity to the specifications false * WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 1 1 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nagabooshanam M 250001, E20 ROORKEE ROAD MEERUT CANTT MEERUT 5 15
bib taps and stop valves cast copper alloy Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Bib Taps And Stop Valves Cast Copper Alloy ( 40 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Ungrouped Item Stop valve(internally Threaded) Stop valve(internally Threaded) Material of body and Bonnet Cast Brass Cast Brass, Leaded in Tin Bronze Nominal Size (mm) 15 15 Finish Nickel-Chromium plated with coating thickness Not less than Service Condition Number 2 of table 3 of IS 1068/1993 Polished Bright, Cast Finish, Nickel- Chromium plated with coating thickness Not less than Service Condition Number 2 of table 3 of IS 1068/1993 Material of Gland, Crutch (handle), Washer Plate Brass (Extruded, Rolled, Cast, die cast) Leaded Tin, Bronze, Brass (Extruded, die cast) Shape of Shoulder at the Bonnet Hexagonal Hexagonal, Square 1/3 Minimum Weight of Item (gram) 400 * Conform to Indian Standard IS:781 Latest YES * ISI marked true true BIS Licence No - * Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES * Test Report No - * Test Report Date - * Name of the Lab - * Address of the Lab - * Test report to be furnished to the buyer on demand YES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nagabooshanam M 250001, E20 ROORKEE ROAD MEERUT CANTT MEERUT 40 15
bib taps and stop valves cast copper alloy Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 2 Year (s) Bib Taps And Stop Valves Cast Copper Alloy ( 30 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Ungrouped Item Bib Tap Bib Tap Material of body and Bonnet Cast Brass Cast Brass, Leaded in Tin Bronze Nominal Size (mm) 15 8, 10, 15, 20, 25, 32, 40, 50 Finish Nickel-Chromium plated with coating thickness Not less than Service Condition Number 2 of table 3 of IS 1068/1993 Nickel-Chromium plated with coating thickness Not less than Service Condition Number 2 of table 3 of IS 1068/1993 Material of Gland, Crutch (handle), Washer Plate Brass (Extruded, Rolled, Cast, die cast) Leaded Tin, Bronze, Brass (Extruded, die cast) Shape of Shoulder at the Bonnet Hexagonal Hexagonal, Square 1/3 Minimum Weight of Item (gram) 400 * Conform to Indian Standard IS:781 Latest YES * ISI marked true true BIS Licence No - * Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES * Test Report No - * Test Report Date - * Name of the Lab - * Address of the Lab - * Test report to be furnished to the buyer on demand YES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nagabooshanam M 250001, E20 ROORKEE ROAD MEERUT CANTT MEERUT 30 15
bib taps and stop valves cast copper alloy Bib Taps And Stop Valves Cast Copper Alloy ( 20 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Ungrouped Item Stop Valve (Mixed End) Bib Tap, Stop valve(internally Threaded), Stop Valve (Externally Threaded), Stop Valve (Mixed End) Material of body and Bonnet Cast Brass Cast Brass, Leaded in Tin Bronze Nominal Size (mm) 15 15 Finish Nickel-Chromium plated with coating thickness Not less than Service Condition Number 2 of table 3 of IS 1068/1993 Polished Bright, Cast Finish, Nickel- Chromium plated with coating thickness Not less than Service Condition Number 2 of table 3 of IS 1068/1993 Material of Gland, Crutch (handle), Washer Plate Brass (Extruded, Rolled, Cast, die cast) Leaded Tin, Bronze, Brass (Extruded, die cast) Shape of Shoulder at the Bonnet Hexagonal Hexagonal, Square 1/3 Minimum Weight of Item (gram) 400 * Conform to Indian Standard IS:781 Latest YES * ISI marked true true BIS Licence No - * Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES * Test Report No - * Test Report Date - * Name of the Lab - * Address of the Lab - * Test report to be furnished to the buyer on demand YES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nagabooshanam M 250001, E20 ROORKEE ROAD MEERUT CANTT MEERUT 20 15
plastics bib taps pillar taps angle valves and stop valves Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Plastics Bib Taps Pillar Taps Angle Valves And Stop Valves ( 20 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Ungrouped Type of Tap/Valve Angle Valve Bib Tap, Pillar Tap, Stop Valve, Angle Valve Materials used for the manufacture body of Tap/Valve Polytetra Methylene Terephthalate (PTMT) PP Copolymer, Nylon 66, PBT, Nylon 66 GF, Poly- Acetal, ABS, ABS- PC Alloy, PVC, Polytetra Methylene Terephthalate (PTMT) Nominal Sizes of Plastic taps and stop valves 15 mm (1/2 ") 15 mm (1/2 ") Finish for Taps valves Not applicable Chromium plating, Silver Plating, Gold Plating, Vapour Curing, Powder Coating, Not applicable 1/3 Threading of Taps Valve External External, Internal Minimum Thickness in any portion of the body and bonnet for all sizes (mm) 2.5 2.5 Identification of the control devices for taps Colour Blue, or letter C for Cold water * Colour of the body of Tap/valve BLUE & WHITE * Conforming to Indian Standard IS 9763:2000: latest Yes * Product ISI Marked true true CM/L number 3178258 * Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification. Yes * Test Report No. 6071410581 * Test Report Date 15-7-2006 * Name of the Lab - * Address of the lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nagabooshanam M 250001, E20 ROORKEE ROAD MEERUT CANTT MEERUT 20 15
Light Emitting Diode LED Fixture- LED Tube Light ( 150 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 18 Watt/1800 lumen 18 Watt/1800 lumen Colour Temperature (K) 4000 2700, 4000, 5700, 6500 Warranty for free replacement (Years) 2 years 2 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin * Ingress Protection in IP IP 20 * Lamp Shell material Glass Polycarbonate, Glass LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig With * Light Source SMD LED Chip * LED Make HAVELLS * Length of tube light (Nominal) (in mm) 1220 * 1/4 FUNCTIONAL LED lamp efficacy (Lm/W) 100 * Colour Rendering Inde (CRI) >/= 80 * Total Harmonics (%) </= 15% * LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes * Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes * Beam Angle (Degree) >/= 120 degree * Operating Voltage range (Volt) 100-300 * Driver Efficiency (%) more than 85% * Surge Voltage withstand (KV) 2.5 KV * LED Chip Efficacy (Lm/W) 130 * Rated Voltage for Performance and life (Volt) 220-240 * Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% * LED Chip Wattage (Individual) (Watt) 0, 25 * Power Factor >/= 0.9 * CERTIFICATIONS BIS Registration certificate under (CRS) number and date - * 2/4 Certificare for Luminaire photometric data as per LM79 Yes * Certificate No and Date of Luminaire photometric data as per LM 79 report - * Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes * EMC Test Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nagabooshanam M 250001, E20 ROORKEE ROAD MEERUT CANTT MEERUT 150 15
LED Lamps- bulb Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) LED Lamps- Bulb ( 100 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 12Watt/1200 Lumens 12Watt/1200 Lumens Colour Temperature (K) 2700 2700, 4000, 5700, 6500 Type of Lamp CAP B22d B22d, E27 Warranty for free replacement (Years) 2 Years 2 Years Conformity to Indian Standard IS:16102 part I and Part II latest * FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 * LED Chip Efficacy (Lm/W) >/=130 * Colour Rendering Index(CRI) >/=80 * Beam Angle (Degree) >/=120 * 1/3 Power Factor >/=0.9 * Total Harmonics (%) </=15 * Driver Efficiency (%) >/=85 * LED chip Wattage (Watt) </=1 * Surge Voltage withstand (KV) 2.5 * Operating Voltage range (Volts) 100 Volt to 300 Volt * Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt * Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 * CONSTRUCTIONAL Light Source (as per LM80 orIS16106) YES * LED Make CG * Light Source (as per LM80/IS16106) SMD LED Chip * Lamp Shell material Polycarbonate * Ingress Protection in IP >/=20 * TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes * LED life test Certificate No. - * LED life Certificate Test Report Date - * LED lamp life certificate for 6000 hrs Yes * LED Lamp certificate Number - * LED Lamp Life Certificate date - * EMC Test Yes * Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes * Test certificate No. - * Test Report Date - * Name of lab where test conducted - * Complusory Yes * 2/3 Registration(CRS) of BIS for safety as per IS 16102-I * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nagabooshanam M 250001, E20 ROORKEE ROAD MEERUT CANTT MEERUT 100 15
kerosene oil fired bhukhari with exhaust pipe Experience with Gov. Required 3 Year (s) Kerosene Oil Fired Bhukhari With Exhaust Pipe ( 10 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC SPECIFICATION OF KEROSENE OIL FIRED BHKHARI WITH EXHAUST PIPE As per Revised QRs/Specification of BIS, CISF, ITBP, SSB, NSG & BPR&D requirements circulated by Police Modernization Division vide Letter no. IV-1701 2/34/2009-Prov1-1791 Dtd03.11.2016. * URL of the specification/drawing http:/mha.nic.in/QRS/tr aining/QRsKeroseneOilf iredBukhari_081116.PD F * Seen and understood the specification Yes * CERTIFICATIONS Test report from NABL/Govt.approved lab covering leaktest, performance Yes * 1/2 test, pressure test and Material tests Name of Laboratory Yes * Test report No. and date yes * Test report to be furnish to the buyer on demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sanjay Dixit 194101, HQ 138 WORKS ENGINEERS, SKARA ROAD, NEAR ZORAWAR FORT, LEH 10 15
Potable water purification system Potable Water Purification System ( 4 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values EQUIPMENT TYPE & FEATURES Type Electrically Operated Reverse Osmosis based water purifier Electrically Operated Reverse Osmosis based water purifier, Gravity operated water purifier, Water Purifier electro- deionization Based Ultraviolet (UV) LAMP Yes Yes Ultra Voilet (UV) Lamp power consumption 11 * STANDARDS Conformity to Indian Standrad for System IS 14724 (latest) for water purification system with Ultraviolet disinfection * Number of float valves/sensors 3 3 INPUT PARAMETERS Input Water TDS 1000 1000 OUTPUT PARAMETERS Recovery at 27 degree Centigrade 25-35 25-35, 30-40, 90-100, 70-80, 50-60 Output Water of RO IS 10500(latest) * 1/3 system Conforming to Indian Standard Output water capacity (Litre/Hour): 50 50 Arsenic and Floride removal capability true true Misc, warranty etc Thin-film composite membrane Yes Yes, No, NA High Pressure Pump Yes * Raw water/Chemical Raw water/Chemical Cleaning PUMP Yes Yes Pre Filter Vessels: Yes Yes, No Micron Filter Yes Yes Membrane Housing Yes Yes Auto cut Yes Yes No of candles (Nos) 3 3 Installation Type Wall mounted Wall mounted Warranty period ( for free replacement of machine 1 2, 3, 1 (or higher) Warranty Period (for scope including free of cost candle and activated carbon onsite replacement twice a year) 1 2, 1 (or higher) Antiscalant- where silica is up to 100 ppm/where Mica is up to 100 ppm Yes Yes, NA Chloride & Flouride removal facility Yes with Pump Yes with Pump Test Report Availability of type test report(Design Evalution Reports) as per IS:14724 and IS 10500 - * Test certificate No and date: - * Name and Address of laboratory which conducted Test: - * * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Anup Kumar Sahoo 190004, HQ CE 31 Zone Opposite Govt GB Pant Hospital, Sonwar, BB Cantt 4 15
kerosene oil fired bhukhari with exhaust pipe Experience with Gov. Required 3 Year (s) Kerosene Oil Fired Bhukhari With Exhaust Pipe ( 10 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC SPECIFICATION OF KEROSENE OIL FIRED BHKHARI WITH EXHAUST PIPE As per Revised QRs/Specification of BIS, CISF, ITBP, SSB, NSG & BPR&D requirements circulated by Police Modernization Division vide Letter no. IV-1701 2/34/2009-Prov1-1791 Dtd03.11.2016. * URL of the specification/drawing http:/mha.nic.in/QRS/tr aining/QRsKeroseneOilf iredBukhari_081116.PD F * Seen and understood the specification Yes * CERTIFICATIONS Test report from NABL/Govt.approved lab covering leaktest, performance Yes * 1/2 test, pressure test and Material tests Name of Laboratory Yes * Test report No. and date 2012 20-10-13 * Test report to be furnish to the buyer on demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sanjay Dixit 194101, HQ 138 WORKS ENGINEERS, SKARA ROAD, NEAR ZORAWAR FORT, LEH 10 15
plastic moulded chair Plastic Moulded Chair ( 45 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR SINGLE PIECE PLASTIC MOULDED SINGLE PIECE PLASTIC MOULDED, PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE, SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE Seat cushion With With, Without Back Cushion With With, Without Conformity to Indian Standard IS 13713- Latest false * Plastic Material POLYPROPELENE FILLED THERMOPLASTIC, UNFILLED THERMOPLASTIC, FILLED THERMOSETTING PLASTIC, UNFILLED THERMOSETTING 1/4 PLASTIC, POLYPROPELENE, PVC (Polyvinyl Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) ARMS With arms With arms, Without arms DIMENSION & WEIGHT Seat Width in mm (+/- 5 mm) 345 * Seat Depth in mm (+/- 5 mm) 340 * Chair Height in mm (+/- 10 mm) 500 * Chair Dimensions Conforming To IS 3663 (Latest) * Weight of Chair (IN Grams) 1000 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 40 40, 45, 50, 55, 60, 65, 70, 75, No Cushion Density of PU Foam in KG per CuM 40 40, No Cushion GSM/Thickness of Fabric (Gram per Sq Meter) N.A 120gsm, 140gsm, 230gsm, 240gsm, N.A Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) 40 40, No cushion Fabric Material composition used for Cushion Cover N.A * PERFORMANCE Stability of the Chair Conforming To IS 5416 (Part 2) * Strength of the Chair Conforming To IS 5416 (Part 1) * Maximum Ash Content is Not more than 1% in Conformity test as per Annex D of IS: 14887 (Latest) Complied that Ash content is less than 1% * UV Resistance Test - % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table Complied Minimum 50% tensile strength retained after exposure as per test * 2/4 1- Cycle Number 2 is more than 50 % Support/Under Structure Support/Under Structure Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum SS 202 STRUCTURE, SS 304 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Sigle Moulded Piece No Support Structure Support Structure Finishing Powder coated Stove enameled Paint, Powder coated, chrome, epoxy polyester, synthetic enamel, Natural Steel Finish, Sigle Moulded Piece No Support Structure CERTIFICATION Test reports to be furnished to buyer on demand NO * MISC Colour Black * Colour/Pattern of Fabric for Seat and Backrest Cushions Red plain weave * WARANTEE PERIOD WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Anup Kumar Sahoo 190004, HQ CE 31 Zone Opposite Govt GB Pant Hospital, Sonwar, BB Cantt 45 15
plastics bib taps pillar taps angle valves and stop valves Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 2 Year (s) Plastics Bib Taps Pillar Taps Angle Valves And Stop Valves ( 50 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Ungrouped Type of Tap/Valve Bib Tap Bib Tap, Pillar Tap, Stop Valve, Angle Valve Materials used for the manufacture body of Tap/Valve Polytetra Methylene Terephthalate (PTMT) PP Copolymer, Nylon 66, PBT, Nylon 66 GF, Poly- Acetal, ABS, ABS- PC Alloy, PVC, Polytetra Methylene Terephthalate (PTMT) Nominal Sizes of Plastic taps and stop valves 20 mm (3/4 ") 15 mm (1/2 "), 20 mm (3/4 ") Finish for Taps valves Not applicable Chromium plating, Silver Plating, Gold Plating, Vapour Curing, Powder Coating, Not applicable 1/3 Threading of Taps Valve External External, Internal Minimum Thickness in any portion of the body and bonnet for all sizes (mm) 2.5 2.5 Identification of the control devices for taps Colour Blue, or letter C for Cold water * Colour of the body of Tap/valve White, ivery * Conforming to Indian Standard IS 9763:2000: latest Yes * Product ISI Marked false true, false CM/L number 3178258 * Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification. Yes * Test Report No. 1174656 * Test Report Date 07/06/2008 * Name of the Lab - * Address of the lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sandeep Thapa 250001, 19 J THE MALL MEERUT CANTT MEERUT 50 15
plastics bib taps pillar taps angle valves and stop valves Average Turn Over of Last 3 Years 5 Lakh (s) Experience with Gov. Required 3 Year (s) Plastics Bib Taps Pillar Taps Angle Valves And Stop Valves ( 150 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Ungrouped Type of Tap/Valve Bib Tap Bib Tap Materials used for the manufacture body of Tap/Valve Polytetra Methylene Terephthalate (PTMT) PP Copolymer, Nylon 66, PBT, Nylon 66 GF, Poly- Acetal, ABS, ABS- PC Alloy, PVC, Polytetra Methylene Terephthalate (PTMT) Nominal Sizes of Plastic taps and stop valves 15 mm (1/2 ") 15 mm (1/2 "), 20 mm (3/4 ") Finish for Taps valves Not applicable Chromium plating, Silver Plating, Gold Plating, Vapour Curing, Powder Coating, Not applicable Threading of Taps Valve External External, Internal 1/3 Minimum Thickness in any portion of the body and bonnet for all sizes (mm) 2.5 2.5 Identification of the control devices for taps Colour Blue, or letter C for Cold water * Colour of the body of Tap/valve WHITE/IVORY * Conforming to Indian Standard IS 9763:2000: latest Yes * Product ISI Marked true true, false CM/L number 2581359 * Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification. Yes * Test Report No. SKTH/GEN/18010214 * Test Report Date 08/01/2018 * Name of the Lab - * Address of the lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sandeep Thapa 250001, 19 J THE MALL MEERUT CANTT MEERUT 150 15
bathroom or toilet mirror Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Bathroom Or Toilet Mirror ( 60 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS: 3438 Latest Yes * ISI Marked No Yes, No CM/L Number NA * Test Report Details Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification NO YES, NO Test Report Number NA * Test Report Date NA * Name of the Lab NA * Address of the Lab NA * 1/3 Dimensions Overall Width (mm) 450 450 Overall Height (mm) 600 600 Mirror Characteristics Mirror Shape rectangular * Mirror Thickness (mm) 5 Any applicable numeric value Mirror Coating Silver coating which shall be protected by Copper coating and Copper coating shall be protected by a paint coating * Frame Characteristics Frame With With Frame Material ALUMINUM aluminum Frame Width (mm) 35 Any applicable text(s) Frame Thickness (mm) 8 Any applicable text(s) Frame Colour SILVER * Other Characteristics Rounded Corners No * Mirror Backside Support Yes Yes, No Mirror Backside Support Material Clamp Support * Fixing Arrangement Clamp Support Hanging System, Clamp Support, Holes with Screws Fixing/Fastening Kit No * Grinding of Mirror Edges Yes Yes, No Glass Sheet for Mirror Flat Tranparent Sheet Glass of Quality AA/SSQ Conforming to IS 2835/1987 Flat Tranparent Sheet Glass of Quality AA/SSQ Conforming to IS 2835/1987, Flat Tranparent Sheet Glass of Quality A/SQ Conforming to IS 2835/1987, Float Glass Sheet Conforming to IS 14900/2000 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sandeep Thapa 250001, 19 J THE MALL MEERUT CANTT MEERUT 60 15 2/3
kerosene oil fired bhukhari with exhaust pipe ( PAC Only ) Kerosene Oil Fired Bhukhari With Exhaust Pipe ( 10 ) ( Under PAC ) Make heatkingoilbukhari Model heatking Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC SPECIFICATION OF KEROSENE OIL FIRED BHKHARI WITH EXHAUST PIPE As per Revised QRs/Specification of BIS, CISF, ITBP, SSB, NSG & BPR&D requirements circulated by Police Modernization Division vide Letter no. IV-1701 2/34/2009-Prov1-1791 Dtd03.11.2016. * URL of the specification/drawing http:/mha.nic.in/QRS/tr aining/QRsKeroseneOilf iredBukhari_081116.PD F * Seen and understood the specification Yes * CERTIFICATIONS Test report from Yes * 1/2 NABL/Govt.approved lab covering leaktest, performance test, pressure test and Material tests Name of Laboratory Yes * Test report No. and date 2012 20-10-13 * Test report to be furnish to the buyer on demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Akash Yadav 194401, GE PARTAPUR, NUBRA, LADAKH, PIN-194401 10 15
Light Emitting Diode LED Fixture- LED tube light Average Turn Over of Last 3 Years 16 Lakh (s) Experience with Gov. Required 5 Year (s) Light Emitting Diode LED Fixture- LED Tube Light ( 1200 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 20 Watt/2000 lumen 20 Watt/2000 lumen Colour Temperature (K) 6500 6500, 6500.0 Warranty for free replacement (Years) 2 years 2 years, 3 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin - Ingress Protection in IP IP 20 - Lamp Shell material Polycarbonate Polycarbonate LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig With - Light Source SMD LED Chip - LED Make crompton - Length of tube light (Nominal) (in mm) 1220 - FUNCTIONAL LED lamp efficacy (Lm/W) 100 - 1/4 Colour Rendering Inde (CRI) >/= 80 - Total Harmonics (%) </= 15% - LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes - Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes - Beam Angle (Degree) >/= 120 degree - Operating Voltage range (Volt) 100-300 - Driver Efficiency (%) more than 85% - Surge Voltage withstand (KV) 2.5 KV - LED Chip Efficacy (Lm/W) 130 - Rated Voltage for Performance and life (Volt) 220-240 - Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% - LED Chip Wattage (Individual) (Watt) 0, 25 - Power Factor >/= 0.9 - CERTIFICATIONS BIS Registration certificate under (CRS) number and date IS 10322(Part 5/Sec 1) dt 01/10/2017 - Certificare for Luminaire photometric data as per LM79 Yes - 2/4 Certificate No and Date of Luminaire photometric data as per LM 79 report 14LP874 dt 10/12/2017 - Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes - EMC Test Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Veer Singh Yadav 194101, HQ CE LEH ZONE, NEAR KALI MATA MANDIR, SPITUK 1200 30
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 80A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CF280A - Printer Model number/numbers for which Cartridge is suitable HP LaserJet Pro 400 M401d Printer, HP LaserJet Pro 400 M401dn Printer, HP LaserJet Pro 400 M401dne Printer, HP LaserJet Pro 400 M401dw Printer, HP LaserJet Pro 400 M401n Printer, HP LaserJet Pro 400 M425dn MFP Printer, HP LaserJet Pro 400 M425dw MFP Printer - 1/2 Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2700 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vishal Dwivedi 194101, HQ CE LEH ZONE, NEAR KALI MATA MANDIR, SPITUK 10 15
Light Emitting Diode LED Fixture- LED tube light Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 2 Year (s) Light Emitting Diode LED Fixture- LED Tube Light ( 192 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 20 Watt/2000 lumen 18 Watt/1800 lumen, 20 Watt/2000 lumen, 22 Watt/2200 lumen Colour Temperature (K) 6500 2700, 4000, 5700, 6500 Warranty for free replacement (Years) 2 years 2 years, 3 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin - Ingress Protection in IP IP 20 - Lamp Shell material Polycarbonate Polycarbonate, Glass LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig With - Light Source SMD LED Chip - LED Make CROMPTON - Length of tube light (Nominal) (in mm) 1220 - FUNCTIONAL LED lamp efficacy (Lm/W) 100 - 1/4 Colour Rendering Inde (CRI) >/= 80 - Total Harmonics (%) </= 15% - LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes - Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes - Beam Angle (Degree) >/= 120 degree - Operating Voltage range (Volt) 100-300 - Driver Efficiency (%) more than 85% - Surge Voltage withstand (KV) 2.5 KV - LED Chip Efficacy (Lm/W) 130 - Rated Voltage for Performance and life (Volt) 220-240 - Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% - LED Chip Wattage (Individual) (Watt) 0, 25 - Power Factor >/= 0.9 - CERTIFICATIONS BIS Registration certificate under (CRS) number and date 10322&2012 - Certificare for Luminaire photometric data as per LM79 Yes - 2/4 Certificate No and Date of Luminaire photometric data as per LM 79 report NA - Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes - EMC Test Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vishal Dwivedi 194101, HQ CE LEH ZONE, NEAR KALI MATA MANDIR, SPITUK 192 25
miniature circuit breakers Miniature Circuit Breakers ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Governing Indian Standard specification IS/IEC 60898-1:2002 Yes - Rated Current (Ampere) 63 A 63 A Instantaneous Tripping Range C C Rated Voltage (Volt) 415 VOLT 240 VOLT, 415 VOLT No of poles/Protected poles(PP) 4 pole with 3PP 4 pole with 3PP ISI marking Yes - CM/L No: 7222457 - CM/L Validity up to 31-12-2018 - CONSTRUCTIONAL Steel sheet enclosure for MCB of 1.2 mm thickness duly pretreated stove enamelled/powder coated Without - Rated Short circuit capacity (Ampere) 10000 A - CERTIFICATIONS Availability of Type test report from Central yes - 1/3 government/NABL/ILAC accridiated laoratory to prove conformity to the specification for each rating. Test Report number SE-64223 - Date of issue of Test Report by Laboratory 14/01/2011 - Test Report to be furnished to the buyer on demand Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Abhay Prakash Rai 248002, GE CLEMENT TOWN 50 15 EMD Required No ePBG Required No
miniature circuit breakers Miniature Circuit Breakers ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Governing Indian Standard specification IS/IEC 60898-1:2002 Yes - Rated Current (Ampere) 40 A 40 A Instantaneous Tripping Range C C Rated Voltage (Volt) 415 VOLT 240 VOLT, 415 VOLT No of poles/Protected poles(PP) 4 pole with 3PP 4 pole with 3PP ISI marking Yes - CM/L No: 7222457 - CM/L Validity up to 31-12-2018 - CONSTRUCTIONAL Steel sheet enclosure for MCB of 1.2 mm thickness duly pretreated stove enamelled/powder coated Without - Rated Short circuit capacity (Ampere) 10000 A - CERTIFICATIONS Availability of Type test report from Central yes - 1/3 government/NABL/ILAC accridiated laoratory to prove conformity to the specification for each rating. Test Report number SE-64223 - Date of issue of Test Report by Laboratory 14/01/2011 - Test Report to be furnished to the buyer on demand Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Abhay Prakash Rai 248002, GE CLEMENT TOWN 50 15 EMD Required No ePBG Required No
Molded Case Circuit Breakers (MCCB)