Munitions India Limited Tender Results

CASE CARTRIDGE (WHITE) TO DRG. NO. ARDE 1878 DET 1 IQW 151, DC 36670-A DT. 20-4-2000 PROTECTIVE FINISH

Manpower Outsourcing Services - Minimum wage - Skilled; ITI; Others

LINER EXPLODER CAVITY TO CQA(A) DESIGNER'S REF. 155- 1070 DC NO. 37629-ADT. 17/10/2023 I. E. ALUMINIUM

FILING/DRAWING CABINET, DRG HE-5834

Custom Bidfor Services-ASSEMBLING AND SHIFTING OF CFB BOXES AS PER

Custom Bid for Services - HIRING OF SERVICE FOR NON EXPLOSIVE ACTIVITIES FOR PREPARATION OF PROOF SETUP FOR PENETRATION PROOF FIRING OF RIGID CUTTING CHARGES 100MM Similar Category Facility Management Service- Manpower based (Version 2)

Cable Termination Kit Suitablefor Cables Uptoand Including33k V (V2) (Q3)

INTEGRATED ALUMINIUM POD ASSEMBLY (PINAKA ADM-1 DPICM) AS PER DRGNO. 8603 01 03 00 00 000 00DA.

SS 304 PTFE LINED CONCENTRIC REDUCER SIZE 40 NB X 25 NB

Hexagonal Brass Rod 20 MM as per IS: 319, GR. 1 for Bolt & Nut Manufacturing., Hexagonal Brass Rod 30 MM as per IS: 319

“ M. S HEXAGONAL HEAD BOLT, SIZE- M6 x 15MM WITH HEAD HOLE OF SIZE- 2MM ON ONE SIDE OF HEX. HEAD. ” Qty

Portable (Movable) Gantry Crane, Capacity: 2 T.

Circular Sheathedwith Flexible Conductor (V2) ISIMarked To IS694 (Q2)

TRAY ALUMINIUM AS PER DRG. SK. NO. 1040 DT. 04.09. 2016.

AIR BREAK CONTACTOR, 3 POLE, 415 VOLT, AC1-250 AMP, AC3-205 AMP, COIL VOLTAGE 230 VOLT, 50 HZ AC FIX, AC1-120 AMP, AC3- 105 AMP, MCCB, Ui-800 VOLT, 400 AMP, 50 KA FIXED WITH MICRO LOGIC TRIP UNIT ALONG WITH SPREADER, IEC

GYM ( WEIGHTLIFTING & POWERLIFTING) EQUIPMENT FOR HEF WELFARE ROOM AS PER SPECIFICATION NO. 100/SPO

Mild Steel Flange. Class: C as per Table BS 10 Table - E Plain Bore. Size- 3 inch (80 mm) .

Oleum

M. S. DRUM (M. S. BARREL) OPEN TOP, CAPACITY-180 LITRE (APPROX) WITH UN CERTIFICATION AS PER ATTACHED SPE

DGR Empanelled ESM Security Services

Custom Bid for Services - FRP Lining and cold Insulation of Reactor No 3 Similar Category Operation And Maintenance Of HVAC System (Heating, Ventilation And Air Conditioning System) Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) Repair, Maintenance and Installation of Plant Systems/Equipments

Custom Bid for Services - FABRICATION SUPPLY AND REPLACEMENT OF MS CHANNEL BASE FRAME OF 04 NOS BOILER Similar Category Manpower Outsourcing Services - Fixed Remuneration

High Temperature muffle furnace up to 1350 degree Centigrade as per enclosed specification No-muffle

compressedasbestosfibrejointingsheet (Q3)

XLPE Cablefor Working Voltageuptoand Including1.1 KV Marked To IS7098 (Part1) (Q2)

UPVC WATER SOFTENER VESSEL 3072 WITH MULTIPORT VALVE, THICKNESS 6MM MINIMUM RASIN CAPACITY 500 LITER

Supply & Fixing of 300 KVAR Reactor Thyristor Based Power Factor Panel.

PLASTIC HOSES TEXTILE RE-INFORCED THERMO PLASTICS TYPE FOR COMPRESSED AIR SIZE 12.5 MM I/D x 19 MM O, PLASTIC HOSES TEXTILE RE-INFORCED THERMO PLASTICS TYPE FOR COMPRESSED AIR SIZE 25 MM I/D x 33 MM O/D, PLASTIC HOSES TEXTILE RE-INFORCED THERMO PLASTICS TYPE FOR COMPRESSED AIR SIZE 6 MM I/D X 10 MM O/D, PLASTIC HOSES TEXTILE RE-INFORCED THERMO PLASTICS TYPE FOR COMPRESSED AIR SIZE 20 MM I/D X 28 MM O/D

Replacement of 415 Volt Main Distribution Boards MDBs 240V Sub Distribution Boards SDBs Outgoing cables and main circuit wirings, Installation of 415 V Main Incoming LT Panel Provisioning of energy meters at 34 rooms of Bamboo Villa Old Factory

Replacement of 11 KV HT Overhead Transmission line from four pole structure of main bus stand to four pole structure near type V through Estate Office single pole structure stadium Two pole structure KV T Point Two pole structure and SS 4 Two

SPIGOT FOR RESERVOIR FOR FILLING TNT IN BOMB 81MM AS PER DRG. NO. AFK/SK-654-10

ELECTRICAL SAFETY SHOE

Fuze Safety No-11

Iso Propyl Alcohol

Manpower Outsourcing Services - Minimum wage - Skilled; Graduate with MSCIT Certificate; Admin

Hot Water Circulated Jacketed Oven comprises of Suitable flanges for pre-heating of rework material

SUPPLY OF COOLING TOWER 250 TR MODEL NO. AQ3862(TB), MAKE - PAHARPUR OR EQUIVALENT AS PER ANNEXTURE

ALKATHENE LINER DIMENSIONS AND PHYSICAL PROPERTIES AS PER QAP NO. OFN/QAP/NC/ALKATHENE LINER/00 REV.

Supply, Installation, Laying, Camping, Termination, Jumpering, Testing and Commissioning of 600 Pair

Prioritizing worker welfare through Modernization and Renovation of change room/rest room and toilet at Danger Building area Primer Filling (Bldg.No.111), Tracer Loading (Bldg.No.28) , Packing loading (Bldg.No.4/1), Case shop (bldgNo.4/2), Insas case

NOSE FUZE TYPE A 670M (EMPTY) FOR 30MM BMP-II AMMN. TO CQA(A) DRG. NO. ? ? . 3.140. 039. C?/c, DC-34241 -A, DT

CARTRIDGE FOR 122MM HE ARTILLERY AMRNN FOR D-30 HOWITZER"

COMPOSITE STRAP 25MM

CUP TO DRG. NO. HEMRL DRG 1262 DET. NO. 1 & DISC TO DRG. NO. HEMRL DRG 1262 DET. NO. 2 FOR DETONATOR 1

CLIP 25MM

Manpower Outsourcing Services - Minimum wage - Unskilled; Not Required; Others

SPIRIT DENATURED, SPECIALLY PREPARED USING RECTIFIED SPIRIT AS PER IS 323-2009 (SECOND REVISION) REA

HIGH DENSITY POLYETHYLENE GRANULES TYPE 2 TO SPECN. NO. JSS 9330-03: 1995 (REV. NO. 1) DC 3490-ME D, POLYTHENE MOULDING POWDER (LOW DENSITY) TO JSS: 9330-03: 2019 REV. 4

Facility Management Services - LumpSum Based - AS PER SCOPE OF WORK ATTACHED; AS PER SCOPE OF WORK ATTACHED; Consumables to be provided by service provider (inclusive in contract cost)

A SET OF INDEXABLE DRILL THROUGH COOLANT HOLE SET CONSIST OF (I) DRILL– DSM 170-051-20A-3D= 1 NO., A SET OF INDEXABLE DRILL THROUGH COOLANT HOLE SET CONSIST OF (I) DRILL– DCM 160-048-20A-3D= 1 NO.