Loading
Loading…
Loading…
1,797 results • Latest
Annual contract for Day to Day Petty Repair Civil Works in Estate Area etc. at O.F.Bhandara
INSERT DNMG 150608 CVD/PVD COATED CARBIDE, FOR UNINTERRUPT MACHINING, APPLICATION RANGE ISO GRADE: S1, INSERT DNMG 150604-TUNGSTEN CARBIDE WITH PVD/CVD COATED, FOR INTERRUPT AND UNINTERRUPT MACHINING OF
SQUIB PSQ3A FOR DETONATOR IED-3 AS PER DRG NO. 3211-00-12-00-26 Dtd: 04/06/87
TOWEL BATH, LINEN 75 CM* 150 CMCOMPOSITION-100% MERCERIZED COTTON, COUNT OF YARN(NE) WARPGROUND - 9S
SQUIB EMPTY TO DRG NO ERDL DRG 1110 DETAIL NO. 1 DT. 08.11. 94
MG. POWDER GR B TO SPECN: IS 2307: 2004
REFINED BEES WAX GRADE-A TO SPECN: -IS-1504-1996 (REAFFIRMED 2014) (3RD REV. ) DC NO. 5225-ME DT. 12/04/2
AMMUNITION CONTAINER BOX H5A TO DRG. NO. OFBh/B H5 A/C/1677 DC NO. 37123 A DTD. 06/07/2007 PART NO. ISV 5
CARRIER 7 A/L ASSY DRG. ISV 499 GA DESIGNER'S REF CIA/AMN/1165 PART NO. ISV 355 A DTD. 02/08/2007
ANTI STATIC PLASTIC BOX (POLY PROPYLENE CO-POLYMER (PPCP) WITH ANTI STATIC GRAIN IN THE RATIO 98: 2 (
Stable Bleaching Powderfor Treatmentof Water Intended for Drinking (V3) conformingto IS1065 (Part2) (Q3)
CABLE WELDING AS PER IS 9857/81 WITH GENERAL PURPOSE HOFR COMPOUND COVERED COPPER CONDUCTOR NOMINAL
High Pressure Fire Fighting Hose - IS 14933 (Q2) MSE Relaxation for Years Of Experience and Turnover Yes | Complete Startup Relaxation for Years Of Experience and Turnover Yes | Complete Document required from seller Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2026/B/7145624 Dated : 23-01-2026 Bid Document 1/7 Number of Auto Extension count 1 Bid to RA enabled Yes RA Qualification Rule 50% Lowest Priced Technically Qualified Bidders Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 25650 ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 14 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : CGM Oradnance Factory Chanda, Department of Defence Production, Munitions India Limited, Ministry of Defence (Chief General Manager) 2/7
Custom Bid for Services - SUPPLY, FABRICATION & FITTING OF 80 NB CARBON STEEL PIPELINE FOR COMPRESSED AIR IN BETWEEN BLDG NO 16A & TO NEW TNT PLANT Similar Category Maintenance and Pigging Service for Oil and Gas Pipelines
Di-Chloromethane(CH2CL2)
Custom Bid for Services - Whole job of dismantling portion of existing Steam lines (Size-125mm, Length-15 meter and Size-50mm, Length-15 meter) and Water line (Size-50mm, Length-24 meter) and fabrication of new steam & water line by providing riser i.. Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments
Multiparameterp Horm Vor ISEor Temp Meter (Q3)
BEARING NO. NU 310 ECM, MAKE: SKF, ONLY SKF ORIGINAL EQUIPMENT MANUFACTURER OR SKF AUTHORIZED DEALER, BEARING NO. 7310 BECBM
CONTAINER TO DRG. NO. 4-24929 INDEX NO. 3RK33 DET. NO. 000DC NO. 36434-A CONSISTING OF THE FOLLOWING IT
LEVEL INDICATOR (PROCESS INDICATOR)
SPARE FOR INDUCTION ANNEALING M/C POWER PANEL CAPACITY 60 K WATT (MAX. ) AS PER ANNEXURE" A" ATTACHED
BEARING NO. NU 209 ECJ, MAKE: SKF, ONLY SKF ORIGINAL EQUIPMENT MANUFACTURER OR SKF AUTHORIZED DEALER, BEARING NO. 7209 BECBJ
“ Filter Sand for Rapid Gravity filter as per IS 17955: 2023 Remark– The firm shall provide NABL acc
Pyrogallol
CASSETTE (TOP & BOTTOM) FOR ERA T-90; A SET OF CASSETTE CONSIST OF ONE NO OF ERA CONTAINER AS PER DR
Custom Bid for Services - ANNUAL MAINTENANCE CONTRACT(AMC) FOR PREPARATION OF BOILERS FOR ANNUAL AND BARE INSPECTION AS PER ATTACHED SPECIFICATION NO OFBA/MM-SM/BOILER AMC/05012026 QTY 1 Whole Job (WJ) Similar Category Operation And Maintenance Of Other Machines And Plants
Vehicle Lift (Q2)
BASE PLATE 7.8MM FOR HEAT/TPT
C. I. NON RETURN VALVE SIZE 350 MM (14'') AS PER IS: 5312 PART I PN 16 SWING TYPE WITH CI BODY & COVE
Set of Pallet and Container Sticker
SHELL W/DB 40MM L-70 HE/T UPGRADED
BRASS STRIP 0.47 MM+ - 0.010 MM THICK X 35.6 MM+ - 0.25 MM WIDE. THICKNESS VARIATION ACROSS WIDTH M
Mild Steel Angle Size: 65 MM X 65 MM X 6 MM Specn: IS - 2062/1992.
WASHER STAR SIZE 32.512 MM OD X 9.525 MM ID X 0.508 MM THICK TO DRG. NO. ARM 1463 A 7 (MATERIAL TIN
BOX STEEL 412/S-4 (WITHOUT FITMENT) SPECN-AS PER IA 1169(N) DC NO. 35576-A, DT. 08.09. 1993 ASSY. DRG ARD
LIQUIFIED PETROLIUM GAS (L. P. G. ), CAPACITY 19 KG COMMERCIAL CYLINDERS.
Flameproof Thermosetting Ammunition Compartment
Split Air Conditioner, Wall Mount Type (V3) ISI Marked to IS 1391 (Part 2) (Q2) (3 (3 ))
Provision of pathway from watch tower no. 6 to watch tower no. 8 along inside perimeter wall at EDK.
Percentage Rate Contract (PRC) on MES SSR-2020 for repair of sewage system in Estate area.
Manpower Outsourcing Services - Minimum wage - Semi- skilled; MINIMUM ITI PASS OR MINIMUM 2 YEARS EXPERIENCE IN RESPECTIVE TRADE; Non-IT Technical, Manpower Outsourcing Services - Minimum wage - Semi- skilled; MINIMUM ITI PASS OR MINIMUM 2 YEARS EXPERIENCE IN RESPECTIVE TRADE; Others
Custom Bid for Services - Hiring of services from trade deployment of labour through TE for Non-Explosive production activities for manufacturing of wooden packing box for Rigid Cutter Charge 100MM Similar Category Facility Management Service- Manpower based (Version 2)
Hiring of Sanitation Service - Manpower Based Model - Sweeper; 6; All Areas; All Areas; Daily; 2
SILICONE 17 COMPOUND (SILICONE GREASE) . SPECN. IND/ME/989 (PROV) LATEST ISSUE
6TH SET OF 3 ITEMS FOR MMHG
Gauge Block Raw Material, Tempered and Hardened, Grade: EN24, OD: 150 MM, Length: 150 MM