Munitions India Limited Tender Results

Air Compressor as per HEF specification

Stationary Storage Type Electric Water Heaters (Geyser) (V3) ISI Marked to IS 2082 (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Repairs to Water proofing treatment of roof DSC Office Bldg no 99 in DSC area at OFDR

Custom Bid for Services - AMC of Portable Measuring Articulated Arm with Probing and Scanning System Range Two and Half meters Similar Category Customized AMC/CMC for Pre-owned Products

IGNITER BAG (FOR M-92) AS PER QAP No. OFN/QAP/BMCS/M92/IB/00 Dated 04.04. 2024, SPECIFICATION No. OFN

OTR Tyres (V2) (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

DGR Empanelled ESM Security Services

“ UPVC Pipe Fittings for size 1/2” - 03 NOS Socket, 02 NOS Elbow, 01 NOS Union, 01 NOS S Bend, 01 NO, “ UPVC Pipe Fittings for size 3/4” - 03 NOS Socket, 01 N, “ UPVC Pipe Fittings for size 1” - 03 NOS Socket, 01 NOS

Set of SS302 and MS Flanges as per attached specification No. 311025

Direct Evaporative Air Cooler (V2) ISI Marked To IS 3315 (Q2) (3 (3 ))

Gland Packing Rope Both End Cut at 45 Degree to suit Dia 140 MM Shaft, Size of Rope-500 X 18 X 14 MM

BOMB 81MM MORTAR 'C' EMPTY BODY WITH PLUG TRANSIT 42 MM-A & WASHER DES REF NO. CIA/AMN/869 PT. NO. ITV

30MM CANON ARTICLE 2A42 WITH 1: 1

Machine Tool way oil Grade 68. Viscosity cSt @40 Degree C- 62- 72. VISCOSITY INDEX. MIN 90.

Acid Centrifugal Pump Set with Motor as per spec. No. 6680/MM/NG/BIAZZI/CNP/P-143/20, Dt. 09/02/2023, Acid Centrifugal Pump Set with Motor as per spec. No. 6680/MM/NG/BIAZZI/P-142/20, Dt. 11/02/2023

Full Gear Coupling as per DRG No. OFI/88/GAP/107 for Kneader

BASE TO CQA(A) DRAWING NUMBER 3-026892, DETAIL 1, DC-37240-A DATED: 17-12-2009.

NYLON RING TO DESIGNER'S REF. CIA/AMN/1579, PT. NO. ITV-50 DC-36257-A. DT. 14-3-97

WOODEN SINGLE BED

Nutrition Balance Diet For Children, Nutrition Balance Diet For Tribal Girls

RUBBER SEAL - UPPER FOR 125MM FSAPDS (DOP 530MM) AS PER DRG. NO: 2003 03 09 05 07 001 00DA

PERCUSSION FUZE M85P13PD3A (FILLED) FOR 155 MM DHANUSH TO ECIL PRODUCT SPECIFICATION NO. 51000096/PD

SET OF 6 COMPONENTS OF ARMING DEVICE-551

SUPPLY AND INSTALLATION OF HEAVY DUTY INDUSTRIAL WET & DRY VACUUM CLEANER UNIT AS PER THE SPECIFICAT

TOP DIE I’ ST DRAW DRG. NO. V5/BT/214, TOP DIE DRG. NO. V5/BT/MN/202, DIE TURNOVER V5/BT/264 A

RESERVOIR FOR FORMER SPIGOT AS PER DRG. NO. AFK/SK- 653-10

Custom Bid for Services - CUTTING & LIFTING OF GRASS, WILD BUSHES, THORNY PLANTS, TREE TRIMMING AND UPROOTING IN ZONE-I(U-05, U-10& FOUR STORAGE, U-11, U- 15 AS PER SCOPE OF WORK ATTACHED Similar Category Horticulture Service - Lumpsum based

Manpower Outsourcing Services - Minimum wage - Unskilled; Not Required; Others

FURNACE OIL, NET CALORIFIC VALUE: 9650 KCAL/KG, FLASH POINT: -60-70 DEGREE CENTIGRADE

Sanitary Napkins Vending Machines (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Alumino-Ferric (V2) Grade-1, as per IS 299 (Q Category)

HYDRAULIC PUMP MODEL 25VQ 21A 1C20.

Set of 450 KV X-RAY TUBE

CONTROL VALVE, SIZE: 1/2"

SUPPLY OF INSTRUMENT SPARES FOR BIAZZI NG PLANT AS PER ATTACHED ANNEXURE

GUN POWDER SPECN: NO. IND/ME 974: 2016 DC NO. 6394- ME DT. 10.05. 2022

CAST IRON PIPES 80 MM DIA WITH SPIGOT AND SOCKET ENDS WITH LEAD FITTING JOINT, VERTICALLY CAST, MATE

Diethyl ether (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

TIMBER PLANK SIZE: - 180 MM X 26 MM X 1.55 MTR. AND TIMBER: DEODAR/SAL/CHIR TO SPEC IND/ME/883(F) DC

EMPTY COMPONENTS OF PRIMER GUV-7, CONSISTING OF BODY TO DRG NO. 3-027321 DET 5, CUP DET 7, OBTURATOR D

BOMB 81MM MORTAR-E EMPTY BODY FOR PWP-WITH PLUG TRANSIT AND WASHER DESIGN REF CQA(A)/AMN/2727 PART N

HEAD FUZE B-429 E(EMPTY ASSY) DRG. NO. IQX 74 GE (2 SHEETS) DC NO. 34663-A DT. 11-7-89. EXCEPT COMPONEN

FUZE PERCN. DA NO. 162 MK-8 (M-2) BRASS WITH CAP, EMPTY, DESIGN. REF. NO. CIA/AMN/273 PT. NO. IQX 35 GE

FIN ASSEMBLY TO DRAWING NO. 4-024610 DETAIL NO. 30 DC 36892-A. DT. 12/04/2003 FOR 125 MM HE AMMUNITION.

Protein Colloid

TAIL UNIT 1A DES. REF. NO. CIA/AMN/794 PT NO. ITV 8A DC 37521-A DATED03/04/2019& SPECIFICATION NO. CQA(A)

CARRIER AMMN. 13A STEEL, DESIGNERS REF. CIA/AMN/2198, DRG. PT. NO ISV-488A SHT-1 OF 3 SHT, DC 37270-A, SPEC

DEHYDRATION PRESS LID RING AS PER DRG. NO: OFBA/NR/633.

HOOK SPANNER, SIZE: 60-90MM, SIZE: 35-60MM, SIZE: 20-35MM, BENCH VICE SIZE 200 MM, PIPE VICE-OPEN TYPE SIZE: 150 MM, TORQUE WRENCH WITH BOX SPANNER

Repairs and Renovation / Re- strengthening of existing MS barbed wire apron fencing, patrolling pathway, cross drainage outside perimeter wall from watch tower no 20 to watch tower no 08 at HEF