National Academy Of Defence Production (nadp) Nagpur Tender Results

Manpower Outsourcing Services - Minimum wage - Skilled; Admin; Data Entry Operator

Manpower Outsourcing Services - Minimum wage - Highly- Skilled; IT-Technical; IT maintenance engineer

Cyber Security Audit - Infrastructure Audit

Monthly Basis Cab & Taxi Hiring Services - Premium Sedan; 2500 km x 320 hours; Local

Manpower Outsourcing Services - Minimum wage - Skilled; Admin; Data Entry Operator, Manpower Outsourcing Services - Minimum wage - Unskilled; Admin; Multi-tasking Staff

Short Term Cab & Taxi Hiring Services - Hatchback; Local; 80Kms x 10Hrs

Domestic Refrigerators as per IS 1476 (Q3)

Monthly Basis Cab & Taxi Hiring Services - SUV; 2500 km x 320 hours; Local

Manpower Outsourcing Services - Minimum wage - Skilled; Admin; Office Supervisor, Manpower Outsourcing Services - Minimum wage - Unskilled; Others; Mazdoor/Labour

HYDROGEN GAS GENERATION PLANT (ALKALINE WATER ELECTROLYSER) OF 100 NM3/HR CAPACITY (Q3)

Scanner (V2) (Q2)

PROFILE GAUGE(TOTAL LENGTH 334.7+/-0.25) FOR 125MM DOP 530MM SABOT AS PER DRG NO: G SAB 125 7 120 0 (Q3), GAUGE FOR M6 EQUISPACED HOLES (FOR 125MM FSAPDS DOP 530MM SABOT) AS PER DRG NO: G SAB 125 7 060 0 (Q3), DATUM DIA GAUGE (Ø 53.58+/-0.1 & 59.72+/- 0.1) FOR 125MM DOP 530 MM AS PER DRG NO: G SAB 125 7 005 0 (Q3)

INSERT CCGT 09T308, CARBIDE WITH CVD/PVD TIAIN/AL203 COATED, APPLICATION RANGE ISO GRADE: N5-N20,, BORING BAR S16R SCLCL 09

STEEL TUBE, OD 159.0+ 1.0/-0.6MM, ID= 132.8+ 0.6/- 1.0MM, LENGTH= 700+/-2.0MM AS PER SPECN: BS 970 GR 8 (Q3)

ANTI-VIBRATION THREADING BAR WITH THROUGH COOLANT FACILITY WITH FOLLOWING SPECIFICATION. BAR DIA: 20M (Q3)

ANTI-VIBRATION BORING BAR WITH THROUGH COOLANT FACILITY WITH FOLLOWING SPECIFICATION BORING BAR DIA: (Q3)

HOLDER FOR RGB-60 AS PER DRG NO. 1134/1/6 (P) (Q3)

)

PLATE GAUGE FOR NOTCH THICKNESS 1.9+ 0.1 (FOR 125MM FSAPDS DOP 530MM CENTERING BAND) AS PER DRG NO: G, PLATE GAUGE FOR WIDTH 15.0-0.1( FOR 125MM FSAPDS DOP 530MM CENTERING BAND) AS PER DRG NO: G OCB 125, TEMPLATE GAUGE FOR 5° ANGLE (FOR 125MM FSAPDS DOP 530MM CENTERING BAND) AS PER DRG NO: G OCB 125 7 0, SNAP GAUGEØ 25.44+ 0.10 FOR 125MM FSAPDS DOP 530MM AS PER DRG NO: G PEN 125 7 102 0., SNAP GO & NO GO GAUGE (FOR 125MM FSAPDS DOP 530MM DRIVING BAND) AS PER DRG NO: G ODB 125 7 010 0, DRG NO: G ODB 125 7 015 0

GAUGE FOR DATUMS (FOR 125MM FSAPDS DOP 530MM TAIL) Ø 25.70+/- 0.08 AT 4MM &Ø 22.09+/-0.08 AT 94MM AS (Q3), NOT GO THREAD PLUG GAUGE AS PER DRG NO. 45161-173-E FOR TAIL 120MM MK-II (Q3)

SUPPLY OF HEAD ROCKET BODY (PRE-MACHINED) AS PER DRG. NO: O ROC 060 1 230 REV. 3 (Q3)

END PIECE FOR RGB 60, AS PER DRG. NO: NASK 1071/3 (Q3)

ASSY CENTRE CONTACT FOR RGB-60 AS PER DRG. NO: NASK 1068/8 (Q3)

STEEL TUBE TO SPECN. ASTM A 106, GR. B, SIZE: OD 65(+/- 0.70) MM, ID 51(+/-0.20) MM IN THE LENGTH OF 61 (Q3)

HARD CHROME PLATING ON DIAPHRAGM ADAPTER (DRAWING NO. NASK 1068/7 FOR RGB-60 AS PER SPECIFICATION: I (Q3)

BUSH FOR RGB 60, AS PER DRG. NO: NASK 1068/10 (Q3)

SNAP GAUGE DIA19.49+/-0.06 120/125MM FSAPDS MK-2 AS PER DRAWING NO: G PEN 120 2 254 0, 255 0, SNAP GAUGE DIA 76.85+/-0.15 AS PER DRG NO. G TAI 120 2 804 0 FOR TAIL 120/125MM MK-II, NOGO THREAD RING GAUGE (EFFECTOVE DIA 18.048+ 0.008) AS PER DRG NO. G OTP 125 4 433 0 FOR IMI TRACER P, GO THREAD RING GAUGE (EFFECTIVE DIA 18.138-0.008) AS PER DRG NO. G OTP 125 4 432 0 FOR IMI TRACER PLU, GO THREAD RING GAUGE FOR DIA22 8/1" -LH AS PER DRAWING NO: G PEN 125 4 502 1 FOR 125MM PENERATOR MARK, NO GO THREAD RING GAUGE FOR DIA22 8/1" -LH AS PER DRAWING NO: G PEN 125 4 503 1 FOR 125MM PENETRATOR

PLUG GAUGE FORØ 23.28+/-0.06 (125MM FSAPDS DOP 530MM SABOT) AS PER DRG NO: G SAB 125 7 125 0 (Q3), PLUG GAUGE FORØ 24.29+ 0.1 (FOR 125MM FSAPDS DOP 530MM SABOT) AS PER DRG NO: G SAB 125 7 130 0 (Q3), SNAP GAUGE GO & NO GO L 32.5+/- 0.1 (125 FSAPDS DOP 530MM SABOT) AS PER DRG NO: G SAB 125 7 020 0 (Q3), SNAP GAUGEØ 124.8+/-0.050 'GO' & 'NO GO' GAUGE (FOR 125MM FSAPDS DOP 530MM SABOT) AS PER DRG NO: G (Q3), SNAP GAUGEØ 120.0-0.1 'GO' & 'NO GO' GAUGE(FOR 125MM FSAPDS DOP 530MM SABOT) AS PER DRG NO: G SAB 1 (Q3), SNAP GAUGEØ 118.5-0.1 'GO' & 'NO GO' GAUGE(FOR 125MM FSAPDS DOP 530MM SABOT) AS PER DRG NO: G SAB 1 (Q3)

THREAD PLUG GO & NO GO M6X1 (6H) FOR SABOT OF 125MM FSAPDS DOP 530MM AS PER DRG NO: G SAB 125 7 170 (Q3), GAUGE FOR 40.0+/-0.1 AND R10 (FOR 125MM FSAPDS DOP 530MM SABOT) AS PER DRG NO: G SAB 125 7 065 0 (Q3), GO & NO GO GAUGE FOR 7° + 0.2° &Ø 35.23- 0.10(125MM FSAPDS DOP 530MM SABOT) AS PER DRG NO: G SAB 125 (Q3), DEPTH GAUGE FOR M6 HOLE DEPTH 12.5+ -0.1(125MM FSAPDS DOP 530 MM SABOT) AS PER DRG NO: G SAB 125 7 1 (Q3), 'GO' RING THREAD GAUGE M38X1.5- 6H(LH) (FOR 125MM FSAPDS DOP 530MM SABOT) AS PER DRG NO: G SAB 125 7 1 (Q3), NO GO' RING THREAD GAUGE M38X1.5-6H(LH) (FOR 125MM FSAPDS DOP 530MM SABOT) AS PER DRG NO: G SAB 125 7 (Q3), POCKET MILLING DEPTH GAUGE 10.0+ 0.5 (FOR 125MM FSAPDS DOP 530 MM SABOT) AS PER DRG NO: G SAB 125 7 0 (Q3), GAUGE FOR R50+ 1.0 RADIUS (FOR 125MM FSAPDS DOP 530MM SABOT) AS PER DRG NO: G SAB 125 7 080 0 (Q3), PROFILE GAUGE GO & NO GO (REAR CAVITY13.0+/-0.1) FOR 125MM FSAPDS DOP 530MM SABOT AS PER DRG NO: G S (Q3), PROFILE GAUGE GO & NOGO (FRONT CAVITY 6° -0.5° & 31+ 0.5° WITH R10.3+ 0.2) FOR 125MM DOP 530MM SABOT AS (Q3)

)

CANISTER FOR LONG PENETRATOR (MK-II) AS PER DRG NO. R PEN 125 4 051 1 (Q3)

GO & NO GO PLUG GAUGE FORØ 114.0-0.1 (FOR 125MM DOP 530MM SABOT) AS PER DRG NO: G SAB 125 7 135 0 (Q3), DATUM DIA GAUGE (Ø 69.82+/-0.1 AT THE DISTANCE OF 133.0) FOR 125MM DOP 530MM SABOT AS PER DRG NO: G S (Q3), LENGTH GAUGE L 334.7+/-0.25 (FOR 125MM FSAPDS DOP 530MM SABOT) AS PER DRG NO: G SAB 125 7 145 0 (Q3), LENGTH GAUGE L 191.90+/-0.1 (FOR 125MM DOP 530MM SABOT) AS AS PER DRG NO: G SAB 125 7 145 0 (Q3), DATUM DIA GAUGE (Ø 57.25+/-0.1 AT THE DISTANCE OF 116.5) FOR 125MM DOP 530MM SABOT AS PER DRG NO: G (Q3), DATUM DIA GAUGE (Ø 53.13+/-0.1 AT THE DISTANCE OF 101.5) FOR 125MM FSAPDS DOP 530MM SABOT AS PER DRG (Q3)

SNAP GAUGE GO & NO GOØ 4.96+/-0.02( TIP 120 MM FSAPDS MK-II) AS PER DRG NO: G TIP 120 2 703 0 (Q3), SNAP GAUGE GO & NO GO L31-0.2 (TIP 120MM FSAPDSMK- II) AS PER DRG NO: G TIP 120 2 701 0 (Q3), SNAP GAUGE GO & NO GO L18.53-0.20 (TIP 120MM FSAPDSMK-II) AS PER DRG NO: G TIP 120 2 702 0 (Q3)

DATUM GAUGEØ 15 @ L22.8-0.3MM PENETRATOR OF 125MM FSAPDS DOP 530MM AS PER DRG NO: G PEN 125 7 105 0 (Q3), SNAP GAUGEØ 23.00+/-0.10 125 MM FSAPDS DOP 530MM PENETRATOR ( DC) AS PER DRG NO: G PEN 125 7 101 0. (Q3), SNAP GAUGEØ 23.09+/-0.10 125 MM FSAPDS DOP 530MM PENETRATOR ( DC) AS PER DRG NO: G PEN 125 7 103 0. (Q3), SNAP GAUGEØ 21.10-0.07 125 MM FSAPDS DOP DOP 530MM PENETRATOR (DC) AS PER DRG NO: G PEN 125 7 104 0 (Q3), SNAP GAUGEØ 24.00+/-0.05 125MM FSAPDS DOP 530MM PENETRATOR AS PER DRG NO: G PEN 125 7 106 0 (Q3), PLUG GAUGE GO & NO GOØ 5+ 0.05 & L14+/-0.5 120 MM FSAPDS MK-2/125MM FSAPDS DOP 530MM AS PER DRG NO: (Q3)

SNAP GAUGE GO & NO GOØ 17.55+/-0.006MM (SPACER 125MM FSAPDS DOP 530MM) AS PER DRG NO: G SPA 125 7 802 (Q3), SNAP GAUGE GO& NO GO L30+/- 0.20MM(SPACER 125MM FSAPDS DOP 530 MM) AS PER DRG NO: G SPA 125 7 801 0 (Q3), GO & NO GO PLUGØ 9.10+/- 0.05 (FOR IMI TRACER PLUG) AS PER DRG NO: G OTP 125 4 425 0 (Q3), GO & NO GO PLUGØ 10.57+/-0.05 (FOR IMI TRACER PLUG) AS PER DRG NO: G OTP 125 4 425 0 (Q3), GO & NO GO PLUGØ 12.15+/-0.05 (FOR IMI DRG NO: G OTP 125 4 425 0 (Q3), SNAP GAUGE 23.11+/-0.09MM(FOR PENETRATOR 125MM FSAPDS DOP 530 MM) AS PER DRG: G PEN 125 7 107 0 (Q3)

CHAMBER GAUGE FOR 125MM DOP 530 AS PER DRG NO: G OMA 125 2 030 0 (Q3), RING GAUGE FOR 125MM DOP 530 DB MACHINED (128.5-0.2) AS PER DRG NO: G OMA 125 2 010 0 (Q3), RING GAUGE FOR 125MM DOP 530 CB MACHINED (124.8-0.1) AS PER DRG NO: G OMA 125 2 020 0 (Q3), SNAP GAUGE GO & NO GO 124.80-0.10 (FOR SHOT ASSY-1OF 125MM FSAPDS DOP 530MM) AS PER DRG NO: G OMA 12 (Q3), SNAP GAUGE GO & NO GO 128.80-0.20 (FOR SHOT ASSY-1OF 125MM FSAPDS DOP 530MM) AS PER DRG NO: G OMA 12 (Q3), GO 'THREAD PLUG GAUGE (FORØ 22 1/8" LH THREAD) TAIL 120MM MK-II AS PER DRG NO: G TAI 120 2 816 0 (Q3)

SUPPLY OF HEAD ROCKET BODY (PRE-MACHINED) AS PER DRG. NO: O ROC 060 1 230 REV. 3 (Q3)

END PIECE FOR RGB 60, AS PER DRG. NO: NASK 1071/3 (Q3)

PACKING BOX FOR RGB-60 AS PER DRG NO. H RGB 060 1 057 REV(4) (Q3)

Multifunction Machines MFM (Q2)

POLYPROPYLENE ADHESIVE TAPE BROWN COLOUR, WIDTH: 48MM, LENGTH: 50 METERS (Q3)

GASKET FOR RGB-60 AS PER DRAWING NUMBER: NASK 1071/5 (Q3)

DIAPHRAGM FOR RGB-60 AS PER DRG NO: NASK 1068/7 (Q3)

HYDROCHLORIC ACID 30% SUPRAPURE MAKE: MERCK, GERMANY (Q3)

GUIDE FOR SOLDERING OF AMK BODY ASSEMBLY AS PER

STEEL TUBE SPCN: BS 970 GR 817 M 40(EN24) OD= 159.0+ 1.0/-0.6MM, ID= 132.8+ 0.6/-1.0MM, LENGTH= 170.0+/-2M (Q3)

QUANTITY. SIDE AND FACE MILL TYPE OR SLOT MILL TYPE CUTTER FOR GROOVE MILLING OPERATION IN VMC WITH THE FOLLOW, INSERT FOR GROOVE MILLING OPERATION WITH FOLLOWING SPECIFICATION. INSERT WIDTH: 3.2+ 0.2MM, CUTTER TY

PLAIN REGISTER Diaries-printed-plain- register- 100 Pages con FORMING TO IS 1848 (Q3), DP 800 PUNCH 6 mm (Punching Diameter) Paper Or Eyelet Punches (Q3), Non magnetic Wood Whiteboard Erasers And Dusters (Q3), 200 MM) SCISSORS (Q3), STEEL SCALE CONFIRMING TO IS: 1481 (Q3), SINGLE SHARPENING HOLES MANUAL PENCIL SHarpener (Q3), Carbon Steel Knife Blades (150 mm* 25 MM Snap off blade (Q3), 305 MM PLASTIC SCALE (Q3), OIL- BASED PAINT MARKERS-PERMANENT-INK (Q3)

ASSY CONTACT FOR RGB-60 AS PER DRG. NO: NASK 1068/6 (Q3)

Goods Transport Service – Per Trip based Service - Valuable goods requiring High Security; OPEN TRAILER; 19 FEET 8 MT