NGP/DIV/CENTRAL RLY Tender Results

60 kg/m Weight Rail in Railway-owned EIMWB installed at BTBR.

Supply of COWL chassis and Fabrication, furnishing and installation/ mounting of Bus body on max 32 feet length COWL and Chassis for ARRV AMF (Accident Relief Road Vehicle) as per attached annexure (A, B, C, D, E, and F) including RTO vehicle registration/passing

Gradient Display Cum Caution Order Board as per specification attached.

Supply of Class 4 Hand gloves with 36 kV working voltage as per IEC 60903:2014 without Joint for Electrical Work Usage, Proof Test voltage: 40kV: Withstand voltage: 50kV (Desirable: A certificate that material has been purchased from the OEM/Authorised dealer of OEM along with 1 Year Guarantee/Warranty certificate and Test Certificate from prescribed institute to be submitted at the time of supply.

1)Power converter of 110V DC to required input voltage (9 to 36V DC). 100W (min.) conforming to EN-50155. 2)STP CAT 6 Cable (Interconnecting cables for fire retardant) Make: D-Link or better.

Battery operated air blower with 18V/4AH battery and charger each one number. Other details as per technical specifications attached.

Supply & commissioning of equipment assembly setup with AC fitting as per Annexure-A & Annexure- B . Note:- the firm will submitt the warranty certificate,test certificate and calibration certificate along with the material.

Digital Torque Wrench 1/4 inch square drive.Range 0.3Nm to 6Nm. Make: De-neer or Eclatorq or Kusam Meco or similar. As per Technical Specification Enclosed.

Spring loaded Insulated Track Gauge cum Level - Model ST-2 or similar as per specification attached.

1) Manufacturing and Supply of the field trial of High Performance Rail Clamp (HPRC) of Robel/Codium Clamp (Trial Item)for 60 kg rails (iv) RDSO/T-5916 (Length= 1000 mm) for 60Kg. ROBEL 68.05 version 13 (Torque-580 N-m). 2) Manufacture and supply of Dial Type Torque Wrench 100-850Nm with Socket 41 mm and Sledge Hammer for Fishplate destressing during installation.

Single Coil Spring Washer as per RDSO Drg. No. T-10773 and confirming to IRS specification No. IRS: T-42-2020 (Rev.01). Latest alterations shall be applicable.

Supply of Binoculars as per Railway board technical instruction No. TI/IN/0055 and specifications attached.

DIGITAL RAIN Gauge as per attached technical specification

Digital Multifunction Tester Supply of Digital Multifunction (Installation)Tester with 3 year warranty having function of Fault loop impedance measurement with RCD Non- Trip feature, prospective earth fault and short circuit current measurement voltage measurement range of 500 V, Insulation resistance measurement (test voltage range from 100 V to 1000 V ) Continuity and line resistance measurement, Earth resistance measurement using 2 pole & 3 pole with accessories, RCD testing for Type AC, A,B and programmable RCD, Bluetooth connectivity, internal memory for test data storage , rechargeable battery as per attached specification Make/Model - Megger MFT 1845+, Fluke 1664 FC or equivalent .

1)Train Set pre fabricated Jumper- A - Cable assembly as per ICF/Chennai Rate Contract No 08/24/1712/1007 DT 14.05.2025. Item no 3 and PL NO 31759452. As per clause 4.41 of RDSO Specification No. RDSO/PE/SPEC/EMU/0196-2019(Latest) along with latest Annexure and Addendum/Corrigendum to M/s Harting Part No.84200000021383 suitable to VB rakes. 2)Train Set pre fabricated Jumper- G Cable assembly as per ICF/Chennai Rate Contract No 08/24/1712/1007 DT 14.05.2025. Item no 4 and PL NO 31759464. As per clause 4.41 of RDSO Specification No. RDSO/PE/SPEC/EMU/0196-2019(Latest) along with latest Annexure and Addendum/Corringendum to M/s Harting Part No.84200000021384 suitable to VB rakes. Warranty Period: 30 Months from the date of supply.

Chop Saw Metal Cutting Machine of size 14 inch, 230 V 50 Hz AC Power Supply. Similar to Bosch Model No GCO200 or Hitachi Model No.CC14STD.Make: Eibenstock/ Bosch/ Hitachi/ Dewalt/ Stanley/ Makita

Manufacture and supply of M.S. Bolts & Nuts of size 25 X 180 mm as per RDSO drawing No. T-11513 (Alt-02) along with associate fittings i.e. one nut and one plain washer 8mm thick, confirming to IRS specification No. T-23-2021 (Redrafted). Latest alterations/amendments shall be applicable.

ELECTRONICS RACK COMPLETE UNIT ALONG WITH CARDS FOR E-70 BRAKE SYSTEM AS PER FTRTIL PART NO. FT0050398-K01.

LAB ITEMS

Light Weight synthetic pre fabricated water proof tent

ARA Terminal Block with links made of PBT/PolyCarbonate as per RDSO Specn.No.IRS:S-75/2006(Rev.2) or latest and RDSO Drg.No. SA-23741A(Alt. 4) or latest

QN1 Non AC immunized neutral relay, 8F-8B, 24 VDC along with plug, board, retaining clip and connectors conforming to BRS:930, IRS:S60/78 with Amendment no.1 , IRS:S34/68 with Amendment no.6 & IRS:S23/88 with Amendment no.1 .

PVC Sleeve of 3 to 5 mm thickness suitable for Structure Bond of M.S. Flat of size 40x6 mm. IS 5831:1984. Material packing in 25 meter coil.

Goods, Manufacture and Supply of Metal Liner to RDSO Drg. No. T-8749 to T- 8750 to Alt-1 , for use with PSC sleeper to RDSO Drg. No T-8746 suitable to 52kg rails. IRS Specification - For Metal Liner for use with Elastic Rail Clips Sr. No. T- 56-2025. Latest Alterations shall be applicable.

Manufacture and Supply of High Tensile Stud Bolt Half Headed with Nut size (25x90mm) as per RDSO Drg. No. T-11504 (Head Thickness 8mm). Technical properties for high tensile bolts as per IS:1367(part 3) 1979, class 10.9. Material testing and passing should be as per procedure given in Railway Standard Specification for Track bolts & Nuts i.e. IRS-T-23-2021(Redrafted). Latest alterations shall be applicable.

Insulation control 415V AC, Measuring range 1-100 k (Set at 30 k ohm), Rated voltage 0-500 V AC, Control voltage 24-240 V, AC/DC or self-activation as per Specification No. RDSO/PE/SPEC/0184-2015(Rev-2).

Supply Installation , Testing and Commissioning of GPS based OHE Monitoring & Current collection system Oliver G as per RDSO spec. No. IS/RDSO-TI/0001:2023 or Latest with all accessories / authentic software necessary for Mapping .

Electric point machine, Non trailable, internal locking, 220 mm throw, with IP67 motor, Minimum AC immunity 400 VAC, with tools & complete accessories including complete ground connection and all insulation, crank handle and along with clamp point lock 60 kg, TWS as per Drg No. RDSO/S- 11000 as per RDSO SPN. IRS:S 24- 2025 Rev.3.0 or latest amendment.

surgical items ETO

POLAROID SIMULATOR/POLE WHEEL SIMULATOR FOR SPEED SENSOR OF WSP SYSTEM OF LHB COACHES WITH ONE SET OF EXTRA BATTERY. Note :- Sample to be approved before bulk supply.

PHONIC WHEEL CENTRING JIG MEDHA PART NO. SPMAET 18 BOGIE 1121

ELECTRIC POINT MACHINE,NON-TRAILABLE (ROTARY LOCKING TYPE), 143 MM THROW,AC IMMUNITY 160V AC TO OPERATE ON 110V DC COMPLETE WITH ELECTRIC MOTOR, LOCK & DETECTOR SLIDES AND CABLE TERMINATION BOX, AS PER RDSO SPECIFICATION NO. IRS:S-24-2025 REV-3.0 (AMDMT), IRS:S 37/82 AND DRG NO. RDSO/S-10800 or latest amendment.

1)CCTV CAMERA at EIMWB at Tadali and Wani goods shed With Specification as per Annexure-I. 2)Electronic In-Motion Weigh Bridge cap 140 T as per RDSO specification WD-29-MISC-19 (Rev.-1) attached Including provision of PRE CAST FOUNDATION and Electrical work 3)COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT WORK (CAMC) OF ELECTRONIC INMOTION WEIGHBRIDGE TO BE INSTALLED AFTER COMPLETION OF WARRANTY PERIOD BY OEM as per specification attached in annexure C

Supply of PVC jacketed wire rope for Track lead connections. PVC jacketed wire rope should be of Galvanised steel wire rope 6mm dia (6x19 stranded wire with steel core of 6 mm dia) sheathed with PVC 2mm wall thickness, overall thickness being 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1984 Reaffirmed 2001 and steel wire rope as per IS: 2266:2019. Reclaimed for recycled material should not be used.

Android Base control communication device as per Annexure attached

Battery Operated Window Bar Cutter as per Annexure A

1) Shunt signal Aspect LED signal unit, 110V AC having lamp proving output to drive LED lamp proving relay, the complete unit confirming to RDSO spec no. RDSO/SPN/153/2023 (Rev.5.0) or with latest amendment or to the latest specification of LED signal aspects and technical specifications. 2) Route LED Signal Lighting unit retrofittable in existing CLS housing as per RDSO Specification No. RDSO/SPN/153/2023 Revision 5.0 or latest amendment. 3) Calling on LED signal lighting unit 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO specification no. RDSO/SPN/153/2023 (Rev.5.0) with latest amendment. 4) Supply of Shunt signal Aspect LED signal unit, 110V AC having lamp proving output to drive LED lamp proving relay, the complete unit confirming to RDSO spec no. RDSO/SPN/153/2023 (Rev.5.0) or with latest amendment or to the latest specification of LED signal aspects and technical specifications 5) Supply of Route LED Signal Lighting unit retrofittable in existing CLS housing as per RDSO Specification No. RDSO/SPN/153/2023 Revision 5.0 or latest amendment. 6) Supply of Calling on LED signal lighting unit 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO specification no. RDSO/SPN/153/2023 (Rev.5.0) with latest amendment.

Air Brake Hose Coupling for Feed Pipe to RDSO Drg.No. WD-81027-S-01, Alt-14. Material and specification: RDSO Spec.No. 02-ABR-02 with Amendment-4 of Sept.2016, Appendix-F.

APD FOR ANGLE COCK TO RDSO DRG. NO. WD-80007-S-12A ALT.19 ITEM NO.3 MATERIAL AND SPECIFICATION CONFIRMING TO IS:2062-2011 (RA:2021) WITH AMENDMENT NO.1 OF NOV 2012 GR E 250 A

The stainless steel barricade is a sturdy, corrosion-resistant structure made of SS Grade 304, designed for kiosk protection and crowd control. It features a welded rectangular frame with 20 to 30 mm vertical rods at uniform spacing, supported by horizontal members. With an approximate size of 58" X 31" X 35" and height around 900 mm, it is floor-mounted using anchor bolts and finished in a smooth polished surface for durability and safety

HOSE PIPE ASSEMBLY FOR LOAD SENSING DEVICE FOR BLCA / BLCB WAGON TO AS PER RDSO DRG. NO. WD-14025-S-01. ALT.1 & OTHER TECHNICAL REQUIREMENTS CONFIRMING TO STR No.02-ABR-02. APPENDIX-F, READ WITH ALL AMENDMENTS, LATEST AMENDMENT No.-3 OF APRIL 2010.

M-20 X 85mm LONG BOLT,NUT WITH CHECK NUT AND SPLIT PIN. DRG. NO. RITES/ TP 9405-S/001 ALT-9 ITEM NO-12

Shackle lock and lock Pin with split pin (Split pin of material IS 549) FOR CENTRE PIVOT PIN SUITABLE DRG.N O :-CONTR-9404-S-8_ ALT-11, ITEM NO-2,3 and 5 and Split Pin to size 3.5mm dia and 50mm length

Supply of rugged handheld terminal (HHT) similar to Zebra TC27 Mobile Computer for PMS/inventory/logistics use, with minimum 8GB RAM, 128GB storage, Android OS, and integrated 1D/2D barcode scanner (SE4710 or higher). Device should support 4G/5G, Wi-Fi, Bluetooth, NFC, and GPS, and be designed for industrial use with IP65/IP68 protection, long battery backup, and compatibility with PMS/ERP applications. Detailed specification attached. The device must be delivered with a pre-installed screen guard and a protective cover/case.

FIBRE GLASS INSULATING FIRE RETARDENT SHEET OF 10 MM THICKNESS AS PER ISO: 10192-1982, Dielectric strenth -25KV/mm with glass content 25 to 34% in standard size of 1.10x1.10 Mtr as per spec. No.IS:10192-1982

1)Pin for pull rod support Pully with washer & split pin for BLCS WAGONS as per Drg.No. WD15011-S-12, Alt-02,Item No-12 2)Brake gear pin 41 dia x 89 mm with 8 X 65 split pin & M-39 washer for BLCS Wagons to RDSO Drawing No. WD- 15011-S-10, ITEM No.-2 & refer part drawing no. L/PN-613/M 3)BRAKE GEAR PIN 58 X 118 WITH BULB COTTER & WASHER FOR BLCS WAGONS AS PER RDSO DRAWING NO. WD-15011-S-10, ALT. 3, PIN NO.4. 4)BRAKE GEAR PIN 55 X 160 WITH BULB COTTER & WASHER FOR BLCS WAGONS AS PER RDSO DRAWING NO. WD-15011-S-10, ALT. 3, PIN NO.3. 5)Brake Gear Pin 58X153 mm with M20 castle Nut & 4 mm dia split pin & washer for BLCS Wagons as per RDSO Drawing No.WD-15011-S-10,ALT-3,Pin No.6

TOOL KIT:- One set consist of following-(1) Double Ended Spanner (Flat) set 12 pieces 06 to 32mm=01 set , 6x7, 8X9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 24x27, 25x28, 30x32 mm. (2) Ring Spanner set 06 to 32mm (12 pieces)= 1 set- 6x7, 8X9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 24x27, 25x28, 30x32 mm. (3) Allen key set 1.5mm to 10mm=1 set 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm. (4) Cutting plier 1621-8=01 No. (5) Screw driver big 929=1 No. (6) Screw driver medium 828=01 No. (7) Screw Driver small 824=01 No. (8) bit Box 8 to 32 set with 05 accessories=01 set. (9) Hammer Ghun-4kg=01 No. (10) Circlip Plier internal 8 inches=01 No. (11)Circlip Plier external 8 inches=01 No. (12)Adjustable Spanner 10 inches= 01 No. (13) Flat file 10 inches=01 No. (14) 36/41 Flat spanner=01 No. (15) 36/41 Ring spanner =01 No. (16) 46/50 Flat spanner=01 No. (17) 46/50 Ring spanner 01 No.

PIN NO- 6 WITH WASHER AND M-20 CASTLE NUT WITH SPLIT PIN. DRG. NO: CONTR-9405-S/9, ALT-[7]

Supply of Pull Rod Main for ' A ' car length 1720mm of BLC wagon drg. no. CONTR-9405-S- 11,Alt. 7 ,item no. 3.Matl.Spec. As per drg.

GI pipe, inner dia. 100mm dia. B-class as per spec. No.IS 1239 PT. 1/2004 or latest with sockets and fittings. TATA/JINDAL/ZENITH BIRLA make.