Loading
Loading…
Loading…
44 results • Latest
Executive L Shape Table, Executive five feet table, Executive four feet table, Executive High Back Chair 1, Executive High Back Chair 2, Executive High Back Chair 3, Leatherrete High Back Chair 1, Leatherrete High Back Chair 2
TNPL 2.49 kilogram Ream of 500 Sheet 80 gsm A4 size Plain, TNPL 2.49 kilogram Ream of 500 Sheet 80 gsm A4 size Plain Copier Paper
All in One PC (V2) (Q2) (3 (3 ))
xerox 2.5 kilogram Ream of 500 Sheet 80 gsm A4 size Plain, xerox 2.5 kilogram Ream of 500 Sheet 80 gsm A4 size Plain Copier Paper
All in One PC (Q2)
Desktop Computers i7
diesel generators- DG Sets Average Turn Over of Last 3 Years 02 Lakh (s) Experience with Gov. Required 2 Year (s)
Steel tables Average Turn Over of Last 3 Years 02 Lakh (s) Experience with Gov. Required 2 Year (s)
Public place seating chair
Line Intractive UPS with AVR
Desktops ( PAC Only )
All in one ( PAC Only ) Experience with Gov. Required 1 Year (s)
Meeting Table ( PAC Only ) Average Turn Over of Last 3 Years 6 Lakh (s) Experience with Gov. Required 14 Year (s)
Multifunction Machines ( PAC Only ) Experience with Gov. Required 2 Year (s) MSME Exemption For Years Of Experience And Turnover Yes Multifunction Machines ( 1 ) ( Under PAC ) Make hp Model hpcolorlaserjetpromfpm377dw Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Ungrouped Type of Machine Multifunction Machine * Print Technology Laser Inkjet, Laser Cartridge Technology With Separate Drum and Toner With Composite Cartridge, With Separate Drum and Toner, Ink Type of Printing Colour Mono, Colour Platen/Flatbed Size A4 A3, A4, Legal Paper Size (Original/Image) A4/A4 A3/A3, A4/A4, Legal/Legal RAM size (MB) 256 * Hard Disk 0 Any applicable numeric 1/3 Capacity(GB) value Minimum Speed per Minute in A4 Size- Mono (PPM) 25 Any applicable numeric value Minimum Speed per Minute in A4 Size- Colour (PPM) 25 Any applicable numeric value Minimum Speed per Minute in A3 Size- Mono(PPM) 0 * Minimum Speed per Minute in A3 Size- Colour(PPM) 0 * Scanning Feature Availability Yes Yes, No Duplexing Feature Availability Yes Yes, No Networking Feature Availability Yes Yes, No If yes, Network Interface Ethernet 10/100/1000 * Faxing Feature Availability No Yes, No Speed of Fax, If Fax Feature is available NA * Original Feed Type ADF Platen, ADF, DADF/RADF, SPDF Feeder Capacity (Number) 250 * Wi-Fi Capability Yes Yes, Wi-Fi Type Wi fi 802.11 b/g/n * Number of Main Tray(Number) 2 Any applicable numeric value Total Main Tray Capacity 250 * Bypass Facility No * Bypass Tray Capacity 0 * Yield of the cartridge/Ink Tank/Ink Pack (for C, M, Y & K individually) supplied with Machine(Number of prints) 3000 * Life of Drum in terms of number of Prints in case of Separate Drum and Toner cartridge 5000 * 2/3 technology(Number of Prints) Duty Cycle/Month (Number of Prints) 5000 * BIS Registration under CRS of Meity Exempted * BIS Registration Number - * Operating Temperature Range (Degree C) 40 * Operating Humidity (%RH) 90 * On Site OEM Warranty (Year) 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shashibhushan Avinash Joshi 425001, Kiranprabha Residency, Flat No. 101, Plot No. 9, Professor Colony, Infront of Government Engineering College, Jalgaon 1 15
diesel generators- DG Sets Average Turn Over of Last 3 Years 05 Lakh (s) Experience with Gov. Required 2 Year (s) Diesel Generators- DG Sets ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 15 15 (or higher) No of Phase - Three Phase ENGINE Make of Engine - * Model Number of Engine - * Capacity of Engine (cc) - * Engine Power (kWm) - * ISI Marking to IS :10001 for engine false * BIS license No, if applicable - * Type of Engine cooling Air Cooled Air Cooled, Liquid Cooled Type of governer Mechanical Mechanical, Electronic (or higher) 1/4 Class of governer A0 A0, A1, A2 (or higher) Number of cylinders (nos) 2 * No of Strokes (nos) 4 * Rated RPM of Engine (RPM) - 1500, 3000 Overload capacity for one hour for every 11 hours continuous running at full load (%) 10 * Specific Fuel Consumption (gm/kWh) - * Starting voltage (volt) 12 * ALTERNATOR AC GENERATOR(ALTER NATOR) Make - * AC GENERATOR(ALTER NATOR) model Number - * Rating of AC Generator (KVA) 15 * Power Factor of AC generator 0.8 * Efficiency at rated Power factor at 75% of full Load 86 * Compliance of Alternator to IS:13364(part-1) Yes * Type of alternator Brushless * Voltage Regulation Grade VG 2 * Alternator IP Rating IP 22 * Class of Insulation H * CONTROL PANEL Control Panel Manual Manual, AMF IP Rating of Control Panel IP 54 * ACOUSTIC ENCLOSURE Sheet Thickness 1.6 1.6, 1.8, 2, 1.2 (or higher) Thickness of Foam 90 * Density of Foam for sound insulation 94 * Noise level at 1 meter (dB) 75 * BATTERY Battery Type & Specification Low Maintenance free to IS: 14257 for high * 2/4 cranking performance Battery capacity (Ah) - * No of batteries 1 * TEST REPORTS Availability of Type test report for Engine from Central govt/NABL/ILAC accredited laboratory No * Test Report number and date(Engine) - * Name and address of laboratory(Engine) - * Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory No * Test Report number and date(Alternator) - * Name and address of laboratory(Alternator) - * DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes * WARRANTY INSTALLATION & COMMISSIONING Warranty 2 Any applicable numeric value Installation & Commissioning Without Installation With Installation, Without Installation Agreed to STC of the Product Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rohan Chandrakant Warekar 415612, Project Director, Project Implementation Unit - Ratnagiri, C/o National Highway Division, PWD, Jaisthambha Chowk, Near Shirke Petrol Pump, Ratnagiri -415612 1 15
Steel tables Average Turn Over of Last 3 Years 02 Lakh (s) Experience with Gov. Required 2 Year (s) Steel Tables ( 10 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS: 8126 Latest true * Storage both side one side, both side Total Number of Storage Units four storage single storage, double storage, triple storage, four storage, five storage, six storage Cup Board/Locker type Storage Units one * Type of Storage Units OTHER DESIGNS * Lock on all storage units Provided * Loading capacity of table top in KG ( ±5 Kg) 800 kg * Table Top Material and Thickness (±2 20 mm thick MDF Board of grade SBG II 20 mm thick MDF Board of grade SBG II 1/5 mm) conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side, 18 mm thick prelaminated Particle Board (Not as per IS 8126), 20 mm multiplex board, 40 mm multiplex board, 50 mm multiplex board, 25 mm thick MDF Board. Padestal (Under structure) Mild steel rectangular section of out side minimum 30 mm X 20 mm & Wall thickness minimum 1.2 mm Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum (Not as per IS 8126), Mild steel rectangular section of out side minimum 30 mm X 20 mm & Wall thickness minimum 1.2 mm Table Top Length ±10(mm) 1360 1360.0 Table Top Width ±10(mm) 750 750.0 Table Height ±5(mm) 750 710, 735, 760, 800, 840, 850, 860, 750 MATERIAL Foot Rest Material N.A * Handles Material Plastic (Not as per IS 8126) * Thickness of PVC tape on edges of Table Top banded with the help of hot melt glue (mm) 2.0 mm * Storage Unit and Drawer Units Material 0.6 mm M S Sheet (Not as per IS 8126) 0.6 mm M S Sheet (Not as per IS 8126), 0.7 mm M S sheet, 0.8 mm M S sheet, 0.9 mm m s sheet, 1.0 mm m s sheet, 1.1 mm m s sheet, 1.2 mm m s 2/5 sheet, 0.5 mm m s sheet Shoes Material nylon * DIMENSION Width of Storage Unit ±5(mm) 355 * Depth of Storage Unit ±10(mm) 650 355, 600, 650, 700, 725, 575 Overall Height of Storage Units ±10 mm 380 mm * Height of smallest Storage Compartment Drawer ±3 mm 75 mm * Height of medium size Storage Compartment Drawer ±5 mm N.A * Height of Largest Storage Compartment Drawer ±5 mm N.A * Width of Locker Cupboard type Storage unit 350 mm 450 mm, 500 mm, 560 mm, N.A, 350 mm Depth of Locker Cupboard type Storage unit 650 mm 600 mm, 650 mm, 700 mm, 725 mm, N.A Height of Locker Cupboard type Storage unit N.A * MISC Foot Rest Provided NO * COLOUR & FINISH Colour of Lamination polished * Paint Stove enameled Paint * Colour of Paint N.A * CERTIFICATION ISI Marked true true, false Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard NO YES, NO 3/5 certification WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rohan Chandrakant Warekar 415612, Project Director, Project Implementation Unit - Ratnagiri, C/o National Highway Division, PWD, Jaisthambha Chowk, Near Shirke Petrol Pump, Ratnagiri -415612 10 15
Metal Shelving Racks
Potable water purification system Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 2 Year (s) Potable Water Purification System ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values EQUIPMENT TYPE & FEATURES Type Electrically Operated Reverse Osmosis based water purifier Electrically Operated Reverse Osmosis based water purifier, Gravity operated water purifier, Water Purifier electro- deionization Based Ultraviolet (UV) LAMP Yes Yes, No Ultra Voilet (UV) Lamp power consumption 11 * STANDARDS Conformity to Indian Standrad for System IS 14724 (latest) for water purification system with Ultraviolet disinfection * Number of float valves/sensors 3 1-5 INPUT PARAMETERS Input Water TDS 2000 1000, 2000, 3000, 4000, 5000 1/4 OUTPUT PARAMETERS Recovery at 27 degree Centigrade 25-35 25-35, 30-40, 90-100, 70-80, 50-60 Output Water of RO system Conforming to Indian Standard IS 10500(latest) * Output water capacity (Litre/Hour): 10 10, 25, 50, 100, 250, 500, 750 Arsenic and Floride removal capability true true, false Misc, warranty etc Thin-film composite membrane Yes Yes, No, NA High Pressure Pump Yes * Raw water/Chemical Raw water/Chemical Cleaning PUMP Yes Yes, No Pre Filter Vessels: Yes Yes, No Micron Filter Yes Yes, No Membrane Housing Yes Yes, NA Auto cut Yes Yes, No No of candles (Nos) 5 1-5 Installation Type Wall mounted Table top, Wall mounted, Floor mounted, Floor mounted & enclosed Warranty period ( for free replacement of machine 2 2, 3, 1 (or higher) Warranty Period (for scope including free of cost candle and activated carbon onsite replacement twice a year) 2 2, 1 (or higher) Antiscalant- where silica is up to 100 ppm/where Mica is up to 100 ppm Yes Yes, NA Chloride & Flouride removal facility Yes with Pump Yes with Pump, Yes without pump, No Test Report Availability of type test report(Design Evalution Reports) as per IS:14724 and IS 10500 - * Test certificate No and date: - * Name and Address of - * 2/4 laboratory which conducted Test: * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rohan Chandrakant Warekar 415612, Project Director, Project Implementation Unit - Ratnagiri, C/o National Highway Division, PWD, Jaisthambha Chowk, Near Shirke Petrol Pump, Ratnagiri -415612 1 15
revolving chair Average Turn Over of Last 3 Years 02 Lakh (s) Experience with Gov. Required 2 Year (s) Revolving Chair ( 7 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest BLUE, RED, black, brown, cream, maroon, white * 1/6 Ergonomic Seat Design true true, false Back type fixed push back, height adjustable backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking tilt limitor * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels 2/6 Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material pu foam bonded chrome coted steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 40 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 * Material of Fabric Back Cover N.A mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, N.A 3/6 GSM/Thickness of fabric ±5%(Gram/Square meter) N.A * DIMENSION Overall Chair Height ±15mm 990 * Backrest Height ±15mm 520.0 * Backrest Width ±10mm 480.0 * Seat Height ±15 mm 480 420, 450, 480, 500, 520 Seat Width ±10 mm 480 440, 520, 550, 460, 360 Seat Depth ±10 mm 480.0 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.3 * Thickness of Plywood used in Seat ±1(mm) 15 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 15 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 35 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 30 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered NO YES, NO 4/6 product is ISO 14001:2015 certified OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rohan Chandrakant Warekar 415612, Project Director, Project Implementation Unit - Ratnagiri, C/o National Highway Division, PWD, Jaisthambha Chowk, Near Shirke Petrol Pump, Ratnagiri -415612 7 15
almirah- Steel Average Turn Over of Last 3 Years 3 Lakh (s) Experience with Gov. Required 3 Year (s) Almirah- Steel ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest false - No of shelves (Nos) 4 - Type of Shelves Fixed - Locker Provided false - Locking System with the locker YES - Cloth hanging provision in the Almirah false - Number of Doors (Nos) 2 - Door Stiffner upto full door height Provided with the almirah doors true - Number of Hinges with each door (Nos) 3 - Number of Glass Sheet fixed in each Almirah door (Nos) 4 - Construction Welded - Lock Three Way bolting - 1/4 device controlled by lock MATERIAL Material M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors 3mm thick polycarbonate sheet fixed in the ms sheet frame M S Sheet, 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame, 3mm thick polycarbonate sheet fixed in the ms sheet frame, perforated MS sheet Sheet Thickness of Locker 1.0 mm - Length of Glass Sheet ±10 (mm) 350 mm - Width of Glass Sheet ±10 (mm) 230 mm - Sheet Thickness of door in mm 1.0 mm - Sheet Thickness of sides, back, Top and Bottom 1.0 mm - Sheet Thickness of Shelves 0.8 mm - Sheet Thickness of Pedestal in mm 1.0 mm - Material of Lock Brass and steel finish - Material of Keys brass and steel finish - DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1855 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1 450 Width in mm (± 7 mm) 910 760, 910, 1023, 700 Depth in mm (±5 mm) 430 430, 455, 480, 486, 270, 3 70, 400 Inside Height of Locker in mm (± 5 mm) 290 mm - Inside Width of Locker i mm (±5 mm) 380 mm - 2/4 Inside Depth of Locker in mm (±5 mm) 430 mm - Width of Stiffner in mm (±5 mm) 115 mm - Thickness of MS Sheet of Stiffner (in mm) 0.6 mm - Stiffened Pedestal height in mm (±2 mm) 120 - Pedestal Width in mm (±2 mm) 70 - COLOUR & FINISH Finish powder coated - Colour of Paint steel gray - Packing: Corrogeted Paper Packing - CERTIFICATION ISI marked false - WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rohan Chandrakant Warekar 415612, Project Director, Project Implementation Unit - Ratnagiri, C/o National Highway Division, PWD, Jaisthambha Chowk, Near Shirke Petrol Pump, Ratnagiri -415612 4 15