Loading
Loading…
Loading…
7,178 results • Latest
Set of Hydraulic Jack i)HYDRAULIC JACK 50TON, Single Acting, High Tonnage, Lock Nut, stroke 200mm, Collapsed Height 314mm, Extension Hight 514mm, Cylinder Effective Area 70.9mm, Oil capacity-1418cm^3, Plunger Dia(threaded) Tr 95 x 4mm, OD 125mm, Lock Nut Height 36mm, Weight 30kg ii) Hydraulic Steel Hand Pump with oil capacity 2200cm^3, iii)High Pressure Hydraulic Hose 06feet, iv) 45 Degree Angled Gauge Adaptor Assembly, 0 to 700Bar, Gauge Port 1/4" NPTF, Male End 3/8"-18 NPTF.
Supply of Anchor Double Strap Assembly (Part No. 5031 and 261) complete with all associated fasteners,
Supply of GI Nut and Bolt assembly of size 16x50x38 mm, consisting of 01 No. GI hexagonal bolt, 01 No. lock nut, 01 No. spring washer, and 01 No. flat washer, all hot-dip galvanized, conforming to RDSO Specification No. TI/SPC/OHE/FASTENERS/0120 [March-2013] or latest,
Supply,Fitment and Prove out of Lifting tackle /J-Hook for Lifting of assembled BG/Wheel set(ICF,BCN,LHB etc) as per Annexure
Safety Guard Assembly for Angle Cock
SERVO PRIME -76 OF m/S Bharat turbol 78 of M/s BPC or TURBINOL 77 of M/s HPC to IS 1012/1993(reaffirmed 1998). Note - the subject product is required to be supplied duly packed in 210 Ltr. capacity steel barrels specn: Specification No:IS:1012-1993
Steady tube assembly for pantograph
Pinion 21 Teeth for WAG-9 Locos as per RDSO Drg. No. SK DP-3847, Alt. 1 or latest and RDSO Spec. No. MP-0-2800-19 (Rev. 1), June 2019 or latest.
Wooden Wedge for Locomotives
(HSN: 9404 90 00) 400 TC Pure Premium MulMul Cotton Single Bed Dohar with Block Painted Designs and 3-layered construction -Top and bottom layers are made from premium printed MulMul cotton, with a soft flannel cotton sheet sandwiched inside for light insulation and comfort for AC use, Size :- 60" (W) x 90" (L), The following printed information should be available in one corner of one side of Dohar: (a) NF Railway (b) Year & Month of Mfg. (c) Name and Brand. The colour should be fast and will not come out when wet. Make :- Jaipur Fabric or Simillar. N.B- Sample to be approved from consignee before bulk supply.
Monthly Basis Cab & Taxi Hiring Services - MUV; 3000 Km x 364 hours; Outstation 24*7
Custom Bid for Services - RECONDITIONING OF ENGINE ROOM VENTILATION FANS OF 1400 HP & 1600 HP CIL MAKE DEMU Similar Category Repair and Overhauling Service
Supply, installation, testing and commissioning of Isolated DC-AC inverter 1+1 HA input 48V DC, output 220V AC as per TS.
Supply of PVC Insulated armoured, unscreened, Under Ground Railway Signalling Cable of size 2 core x 2.5 Sq. mm Copper as per RDSO Specification No. IRS:S63/2014 (Rev. 4 or latest)
MINIATURE CIRCUIT BREAKER TRACTION
Supply of Copper strip for equipment earthing. HSN CODE:7409
Supply of Hermetically sealed scroll compressor for Deep Freezer of LHB Hot Buffet car as per schedule of requirements
Supply of Torque Wrench Kit, comprising a 20V battery-operated impact wrench with brushless motor and 1/2 inch square drive, having variable no-load speed of 0-1800 / 0-2000 / 0-2400 RPM and impact rate of 0-2200 / 0-2600 / 0-3000 BPM, delivering maximum fastening torque of 405 Nm and breakaway torq
UNDELSLANG FUEL TANK FOR 1400 HP DPC, UL NO: 31319320090101, CAPACITY 3000 LTRS FOR DEMU DPC, DRG NO: DME/DPC 5-9-0-551, COL-X, ALT-I.
1.5-pin complete coupler (with male and female part) (Part no. KPSE7E14-5P DZ& KPSE6E14-5SDZorequivalent) for fitment to sensor plate as per CLW drawing no. CLW/ES/3/SK-2/0153, Rev-04 and CLW specification no. CLW/ES/3/0528, Alt. A. Amphenol partNo.MS3474W12-3P-SQSC-1No and Amphenol part No. MS3476W12- 3S-SQSC-1No, 2.3-pin complete coupler (with male and female part) (Part no. KPSE7E12-3P DZ& KPSE6E12-3SDZ or equivalent) for fitment to sensor plate as per CLW drawing no. CLW/ES/3/SK-2/0153, Rev-04 and CLW specification no. CLW/ES/3/0528, Alt. A. Amphenol PartNo.MS3474W14-5P-SQSC-1No andAmphenolPartNo.MS3476W14-5S-SQSC-1No
Supply of it related items as per schedule of requirements (Specification attached)
Supply of LED torch as per attached specification and schedule of requirements
Supply of Underground , armoured, unscreened, railway Signalling cable PVC insulated copper conductor conforming to Specn. No. IRS:63/2014 REV. 4.0 or Latest amendment of Size- 12 core x 1.5 sq mm.
HARD DRAWN GROOVED COPPER CONTACT WIRE,JOINTLESS,107 SQ.MM MADE OUT OF CONTINUOUS CAST COPPER WIRERODS. AS PER RDSO SPECN. NO. TI/SPC/OHE/CW/0971 or latest. Make accepted RDSO approved firms only.
Supply of FEEDER JUNCTION BOX-SOCKET SIDE FOR LHB as per schedule of requirements
Supply of Multi utility Vehicle (Double CAB AC pick up vehicle) Two-wheel Drive Make:-TATA, Mahindra or similar. Required: - (All Road Tax, Vehicle ,Registration and Insurance shall be borne by the supplier) (Specification attached)
Supply and Commissioning of Dissolved Ga [Supply and Commissioning of Dissolved Gas Analyzer (DGA) analysis machine as per annexure-1 attached Make:-Hshama Surgical Pvt Ltd or Similar.]
RESISTOR REGRT, 190-50 W to EMD Pt No - 9519539.
1. Pin for AM-12 Type Pantograph as per SIL Ref. No. S0221125701 or Similar for 3 Phase Electric Locomotive. 2. Shunt Long , As per SIL Ref.no. S0220 133203 or CPL Part No. C0320 or Similar for AM-12/IR-01/PAN 01/EL-01 Type Pantoghapr for 3 Phase Electric Locomotive. 3.PTFE Sleeve for Pantograph Eyelet Rod Size OD-45mm ID- 34mm & Length-150mm of 3 Phase Electric Locomotive. 4. Spring for Plunger Assembly of AM-12 Type Pantograph as per GSEC Drg. No. GSEC/PANTO/061 or Similar for 3 Phase Electric Locomotive.
RESISTOR 1..5 K - 25 Watt control console left to EMD Pt No - 8327932.
UIC COUPLER SOCKET AS PER SCHALTAU PART NO-UICKD 13S CO CO CODE-1- 1494-982899. OR EQUIVALENT OF M.S HARTING, SUITABLE FOR HOG POWER CAR AS PER RDSO MODIFICATION NO:RDSO/PE/MS/AC/0051-2011-REV-2,AM 1
Contactor Type-6 for headlight to CLW Spec. No. CLW/ES/3/0034, Alt-C or latest and ABB ID No. HBTB585402R0821.
MVB based Graphical Driver Display Unit
Gasket Turbocharger Mounting to EMD Part No - 40040027.
Custom Bid for Services - Day to day maintenance of TTE Rest Room Mariani including the work of Cleaning, Meal cooking/preparation and Serving for a period of 02 (Two) Year Similar Category Facility Management Services - LumpSum Based
Supply,Installation and Commissioning of Multifunction Calibrator
BUDESONIDE 160 MCG + FORMOTEROL 4.5 MCG INHALER WITH DOSE COUNTER
SALBUTAMOL 2MG/5ML SYP 100ML BOT
VILANTEROL 12.5MCG + FLUTICASONE FUROATE 100MCG WITH DOSE COUNTER IN 120MDI
ETOPHYLLINE 115MG + THEOPHYLLINE 35MG RETD TAB IN STRIP
Square washer (MS) for cattle guard. Size- 40 x 40 x 6mm, 21mm drill hole at center.
Kit for Magnetic Particle Inspection consisting of following items: 1) 03 no's of White contrast paint in aerosol cans confirming to ISO 9934- 2:2002 (can volume of 525 ml and net content 400 ml). 2) 02 nos of Black Magnetic Particle Ink in aerosol cans confirming to RDSO specification M&C/NDT/109 (Rev-1) Type-1-2007 (can volume of 525 ml and net content 400 ml). Make ORION or similar FIRMS OFFER:MAKE/BRAND
Absolute value Transducer Part No. ELT-200-00001A-902-5-I
Custom Bid for Services - Day to day maintenance and management activity of Running Room at DKGN NHLN and RPAN for a period of two (02) years Similar Category Manpower Outsourcing Services - Minimum wage Manpower Outsourcing Services - Minimum wage
Tamper Check Paste(30 ml)(Highly visible, viscous and fluorescent in nature), Colour:orange, Tip Size: 2.9 mm, extra nozzle of 1 mm and 2 mm should be provided) Spec:(Highly visible, viscous and fluor
Rubber based adhesive conforming to IS: 2561-1963 or latest type heavy duty in the pack of 5 Ltrs Tin. Make Dunlop S-758 or Fevicol SR 998 FW ,SR 505 "or equal". Item to be supplied within 60 days of
DRAIN FOR FLOOR MOUNTING LW63138 Alt. e Spec:as per drawing