North East Frontier Railway Tender Results

Spring single coil

COMPOSITE GROOVED RUBBER SOLE PLATE(CGRSP) - 10MM THICKNESS FOR USE WITH WIDER PSC SLEEPER TO DRAWING NO. RDSO/T-8746 SUITABLE TO RAILS 60 KG(UIC) / 60E1 & 52 KG DRW: (RDSO) RDSO/T-8747 ALT-1 SPEC: (RDSO) T- 55-2025 Revision-01

Traction Motor (Complete assembled) for [Traction Motor (Complete assembled) for HHP Locomotives as per, DLW Part No: 18080017]

TRACTION MOTOR OF HHP LOCOMOTIVES PL NO- [TRACTION MOTOR OF HHP LOCOMOTIVES PL NO-12851220 BLW PART NO-18080017 AND RDSO SPECIFICATION NO. - MP.0.2400.52 REV - 04, SEPTEMBER 2022]

Steel Cloth Lockers (V3) (Q2)

Supplying and installation of Panasonic [Supplying and installation of Panasonic Colour TV, TC/21FX-10 or similar]

ALTERNATOR FOR MFI M/C PART NO.-6304465 MAKE: CUMMINS

CARBON BRUSH ASSEMBLY FOR WHEEL SET EARTHING EQUIPEMENT IN LHB COACH as per Drg.No. RCF DRAWING NO.LW71239 ALT NIL. specn: EDTS 101, REV-C,AM-3

Industrial Leather Safety Shoe, Size-10 with directed injected P.U. Outshole to IS:15298/2011 [Part-2] Table-1,Classification of Footwear-Code designation -I, Design-B (Ankle Boot).Colour-Black,Size-1

Supply of Window glass only used for LS type coaches of LHB as per RCF Drawing No-LJ54109, Suitable holes to be provided on glass for fitment of lock as per item No-5 in attached RCF Drawing No-LJ5411

Resilence pad radiator core to EMD Pt. No. 9529026. DLW Pt.No. 17270261

Latch assly. Inside to EMD Pt. No. 40084529

Industrial Leather Safety Shoe, Size-8 with P.U. Outshole. Mat. Spec: BIS,IS:15298/2016 [Part-2] Table-1,Classification of Footwear-Code designation -I, Design-B (Ankle Boot).Colour- Black With latest

Pillow Cover Handloom in size 74 cms x 52cm stitched on all four sides and also stiched 35mm from all four borders one end open on width side with a flap of 12cms IR monogram to be stamped on two diag

Bridge Assembly Rectifier SCR Silicon Controlled Exciter Bridge as per to EMD Pt No - 8451653.

SET OF ITEMS AS PER ANNEXURE ATTACHED FOR 1400 HP AND 1600 HP DEMU DPC. Make: CIL or Eqv MAKE/BRAND - Cumins

SET OF ITEMS REQUIRED FOR POH OF 1400/1600 HP DEMU DPC AIR DRYER AS PER ANNEXURE ATTACHED. Make: SPIN AQM MAKE/BRAND - Spin AQM

Supply of small jumper made of 50 sq mm annealed copper conductor, suitable for 25 kV AC OHE applications as per TRD specifications. MAKE:-SIA

Fabrication and supply of Refective high intensity 4Avery Dennison prismatic type IV sheeting Bridge board or equivalent make with company Pre gualification warranty certificate: Bridge Boards made up

Fabricated Side Stanchion for BRN Wagon. Drawing - IRS Drg. No. W/LG-1843 Alt-2, with latest alteration. Mat. Spec. - As per drawing with latest revision and amendments. Make: EEI

''Diode'',silicon positive base white porcelain to EMD Part No - 40029132.

Bolt hex high tensile size 3/8-24x1-3/4 to EMD pt no 186485 FIRMS OFFER:MAKE/BRAND " TVS/UNBRAKO " MAKE IS ACCEPTED

Relay Ground assembly - GR to EMD Pt No -40050359.

DURIAN Steel Clothes 12-locker type Type Brand: DURIAN (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687712526008 dt.08/07/2026)

Unbranded 1 liter Oil of Turpentine Brand: NA (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687711971107 dt.08/07/2026)

Supply of 110V AC Main LED Signal with integrated current regulator retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO specfication RDSO/SPN/199/2010 Rev 1.0 or latest.

A9 Handle assembly for DBC(E-70 brake system) as per M/s. FTRTIPL part no. FT0050398-202. FIRMS OFFER:MAKE/BRAND "FAIVELEY" MAKE IS ACCEPTED

Supply of 1" OD SWIVEL ELBOW as per ICF /STD Drg. no:- 3-5-022 ,Item no- 3 Air Brake Female elbow connector double ferrule compression tube fitting grade 305 SS. make- HAVI,EXCEL, OR SIMILAR.

BRACKET FOR LOCKING BOLT FOR BOXN WAGON. Drawing - RDSO'S DRG NO.- WD-90007-S-1, ITEM NO- 14, ALT- 21, with latest alteration. Mat. Spec. - As per drawing with latest revision and amendments Firm OFFE

Supply of 160 Sq. mm Large Jumper Wire made of high-conductivity stranded circular annealed copper conductor, conforming to RDSO Specification No. ETI/OHE/76 (6/86) or latest, suitable for 25 kV AC tr

Supply of Large Jumper Wire, 160 Sq. mm, multi-stranded annealed electrolytic grade copper conductor, high flexibility, insulated with heat, oil, and weather-resistant elastomeric compound, suitable f

Carbide tip tools square type for under floor wheel lathe. specn: Sandvik Specification No: Part no. 172-32-191940-25m.

Brake Block Locking Cross Pin for NDM6 Locomotive, Size-3/8" x 3-1/2".

Analogue Outside micrometer 0 to 150mm, Make: Mitutoyo or Equivalent

COPPER TERMINALS (150-12) ECC CUP LUG, Make- Dowell's, Swastik Or Similar

MAINTENANCE KIT

500 VA, 415/110V, 50 Hz

(1) Supply & testing of 4 Core, 120 sq mm, LT power AL cable, stranded, XLPE Insulated, Cores Laid Up, PVC tape Innersheathed, Armoured, Extruded PVC Type ST2 Sheathed, 650/1100 V Grade As Per IS 7098 (Part 1) 1988 or latest as per instruction of Engineer incharge at site. (2) Supply & testing of 4 Core, 185 sq mm, LT power AL cable, stranded, XLPE Insulated, Cores Laid Up, PVC tape Innersheathed, Armoured, Extruded PVC Type ST2 Sheathed, 650/1100 V Grade As Per IS 7098 (Part 1) 1988 or latest as per instruction of Engineer incharge at site.

(1) Supply & testing of 4 Core, 25 sq mm, LT power AL cable, XLPE insulated, cores laid up, PVC innersheathed, armoured aluminium stranded conductor, extruded PVC Type ST2 outer sheathed, 650/1100 V Grade As Per IS 7098 (Part 1) 1988 or latest as per instruction of Engineer incharge at site. (2) Supply & testing of 4 Core, 25 sq mm, LT power AL cable, stranded, XLPE Insulated, Cores Laid Up, PVC tape Innersheathed, Armoured, Extruded PVC Type ST2 Sheathed, 650/1100 V Grade As Per IS 7098 (Part 1) 1988 or latest as per instruction of Engineer incharge at site.

Silico Manganese pedestal jaw liner

Cap Lens Radar

Flange welded joint 25 mm bore

M.S. Wire Rope 3 mm IS:226/1963 and Construction Hemp Core to IS: 1804/1961

Sealing wire, double rope type, made of soft mild-steel galvanized wire consisting of 0.5 mm dia (25 SWG) core wire with 0.46 mm dia (26 SWG) soft mild-steel galvanized wire helically wrapped around the core at 4%uFFFD5 turns per cm, conforming to IS: 280-2006. The finished sealing wire shall be supplied in coils of 1 kg each.

Eye Bolt for Tank Wagon.

Hand brake connecting link BCN/BCNA

Manually towable hand operated Scissor table, capacity: 500kg, Platform size: 510X 900 mm, scissor minimum height: 380 mm, scissor lift maximum height: 1500mm, No. of scissors: Double, Hydraulic cylinder: 1 No., Platform surface: MS Plate, Wheel: 2 moveable, 2 fixed (125X 50 mm) Make: SPI or Equivalent

Switch relay with LED Display LO and HI suitable for use with Engine water Float Level Switch as per Specification, Operating Voltage 24 Volt, Current Capacity 1.0 Ampere, Auxiliary Contact 1 NO + 1 NC, Suitable for use with 02 engine module DETC.Make DISPOTRONICS or its Equivalent

Supply of Glider Polyester Webbing Sling/Lifting Belt/ for Crane 5mtrs. X 10ton capacity. Make: FERROTERRO/Safe lift or similar, HSN Code: 8431.

LED Based Emergency automatic Light Unit, Type II, with 12V, 7Ah capacity Sealed Maintenance Free Battery for LHB Coaches conforming to RDSO's Specification No. RDSO/PE/SPEC/AC/0180-2016(Rev.0) and RDSO Drg. No. RDSO/PE/SK/TL/0181-2016 (Rev.0) Sheet 1&2