Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
765 live270 closing this weekmost from North Eastern Railway and Indian Railways
765 results • Latest
Operation contract of Spray-Painting Booth with baking oven.
CARBON BRUSH FOR TRACTION MOTOR BHEL TYPE 253AZ, 4603 AZ, YDM4 LOCOS TO DCW DRG. NO. CB-24 RF & PART NO. 47416580.
BRUSH HOLDER FOR EDDY CURRENT CLUTCH, WDM2 & YDM4 LOCOS TO BHEL DRG. NO. 34362018008 V00
Supply, Installation and commissioning of CCTV Surveillance CAMERA with LED TV at GSD/IZN/Depot consist of 15 items as per annexure -1.
1.Supply of Retro Reflective Tape Size :- 05 inch width ,Colour Yellow. Specification of the retro reflective is as per ASTM :D4956-04 and shall have a smooth surface which has the property of retro- reflection over its entire surface. The sheeting Shall be weather resistant and show colour fastness. They shall show no evidence of cracking, peeling, pitting, blistering, edges lifting on curling and shall have no shrinkage or expansion. 2.GOLDEN YELLOW REFLECTIVE TAPE , COLOUR CODE- ISC NO- 356 OF IS-5/07 ,SIZE- 04 INCH WIDTH X 50 MTR. LENGTH IN ONE ROLL. Specification of the retro reflective is as per ASTM :D4956- 04 and shall have a smooth surface which has the property of retro- reflection over its entire surface. The sheeting Shall be weather resistant and show colour fastness. They shall show no evidence of cracking, peeling, pitting, blistering, edges lifting on curling and shall have no shrinkage or expansion. 3.Retro Reflective Tape 25 MM widthX25 meter length . Colour Yellow. Quality-Grade-1 type pressure bonding (R 1-P) conforming to IS 14221 or latest and shall have a smooth surface which has the property of retro- reflection over its entire surface. The sheeting Shall be weather resistant and show colour fastness. They shall show no evidence of cracking, peeling, pitting, blistering, edges lifting on curling and shall have no shrinkage or expansion.
GOLDEN YELLOW REFLECTIVE TAPE COLOUR CODE- ISC NO- 356 OF IS-5/07 , SIZE 02 INCH ( WIDTH) X 45 MTR ( LENGTH) IN ONE ROLL as per ASTM :D4956- 04 and shall have a smooth surface which has the property of retro- reflection over its entire surface. The sheeting Shall be weather resistant and show colour fastness. They shall show no evidence of cracking, peeling, pitting, blistering, edges lifting on curling and shall have no shrinkage or expansion.
Enamel, Synthetic, Exterior, Finishing Dark Admiralty Grey to ISC:632 of IS:5/2007 (RA-2022). To Spec. IS:8662/04 (RA-2019) or the latest and ICF/MD/Spec- 045, issue status 2, Rev.03 with Amdt. Dt. 22/4/2008 or the latest. The pigment content shall be 6% minimum (by mass) as per RDSO lr.No. M&C/PCN/I/64/I/Vol.II dated 12/5/2016 as RDSO Amdt. No.1 Packing condition- Packed in20 liters New, Sound and Non-Returnable MS drums to IS 2552/89 (RA - 2018) with Amdt.No.1 Gr.B2
PNEUMATIC COUPLER WITH MALE PART 1/4 BSP(QUICK RELEASE COUPLER)
Self Aligning Double Row Spherical Roller Bearing No-22220 With Brass Cage Make- SKF/FAG/NTN/NBC/TIMKEN Only. Special Condition :- (a) The Firm shall supply the Bearing with original manufacturers tamper proof seal. (b) The Firm shall furnish manufacturer authorized agent certificate
MS WIRE ROPE LOCK CLAMP FOR 2 MM WIRE..( DIN 741 )
WELDING ELECTRODE REDRYING OVEN-45 KG CAPACITY, WITH ALUMINIZED HEAT- RESISTANT(HR) HAND GLOVES WITH ALL SPECIFICATIONS AS PER ANNEXURE-A. MAKE- ESAB OR ADOR OR WARP ENGINEERING OR MESSERS OR WEC or equivalent OEM meeting all technical specifications
Exhaust Manifold Thermal Insulation Kit,Size of Roll Length-06 mts, Width- 04 inch, Thickness 25mm +/- 3mm to RDSO Spec No- MP.0.2600.24 Sept-2009(Rev-0.01).
3KW , 30VOLT, 100 AMP. TRANSOM, LOW CUT-IN, LOW MFO ALTERNATOR CONNECTED WITH FLAT BELT DRIVEN PULLEY WITH RECTIFIER REGULATOR UNIT COMPLETE SET, EACH SET CONSISTS OF:- (1) 3KW, 30V, 100A LOW MFO, LOW CUT- IN ALTERNATOR FITTED WITH FLAT BELT DRIVEN ALTERNATOR FULLEY AS PER KEL DRAWING NO: 2-A 3106= 01 or equivalent (2) RECTIFIER CUM REGULATOR OF MAGNETIC AMPLIFIER TYPE AS PER KEL DRG. NO : 3-A 3124 ALT-5 = 01 or equivalent , (3) SAFETY CHAIN AS PER KEL DRG NO : 2-A 3076= 02 NOS or equivalent (4) SUSPENSION HANGER PIN AS PER KEL DRG. NO : 2-A 3035 ALT-1=, 01 NO or equivalent (5) CLEAT FOR CABLE ANCHORING AS PER KEL DRG, NO: 2-A 4014 ALT 2= 01 or equivalent SET. Make - HMTD, BECON, STONE INDIA, PRESSTECH, KEL OR SIMILAR
Cleaning, Sanitation and Disinfection Service - Outcome Based - Office/Commercial/Institutions/Residential; Septic Tank Cleaning; Outdoor
Ambulance Service (Event Based and Short Term) - Type C Basic Life Support Ambulance; Single Stretcher Premium Van; Force Traveler Ambulance; 80 Km
XLPE Cablefor Working Voltageuptoand Including1.1 KV Marked To IS7098 (Part1) (Q2)
Split Air Conditioner, Wall Mount Type (V3) ISI Marked to IS 1391 (Part 2) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No
Split Air Conditioner, Wall Mount Type (V3) ISI Marked to IS 1391 (Part 2) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No
Design, Supply, Erection, Testing & commissioning of (i) 25KV, 50 Hz AC, Single Phase OHE electrification works at Deokali & Jharekhapur Railway Station in connection with conversion of Deokali and Jharekhapur Railway Station in to Three Line Crossing Station with Goods Platform in Sitapur-Mailani Section of Lucknow Division (ii) Construction of ROB Viaduct, LHS, approaches in lieu of level crossing no- 182 between KMJ-RDN station in CPA and Kasganj section in Izzatnagar Division (iii) Construction of 02 Lane ROB in lieu of LC No 245/B1, at KM: 630/9631/0 between Mankapur- Jhilahi Railway stations of Lucknow Division.
Gapless lighting arrestor for 25 KV, 50 HTZ AC electric locomotive Spec. No. ELRS/SPEC/LA/ 0005, July-1999 & CLW Spec. No. CLW/ES/ SK-1/A-12 Alt. D as above.
Dry Type Fresh Air Filter (Type-1), Size-260x230x60 mm suitable for Conventional & Garib Rath AC Coaches, Confirming to RDSO Specn. No. RDSO/PE/ SPEC/AC/0055-2003 (Rev.3) and Drg. No. RDSO/PE/SK/AC/0057-2003 (Rev.2) Item No.3 of (Sheet 1 of 2).
Compensating ring of size 8 mm as per Drg No 1227229 Alt. 06R, Item-4 Material: X5CrNi18-10.
Liner 105x24x2mm for Land Surface Fig no.40, Para-5.4.2 of G-95(Rev-1) etc.
Locking Bolt for Flap Door 'BOXN' Wagon to RDSO drawing No.WD-23018-S-01 Alt-4, Item No.15 .
Flap Door Frame with Panel Complete (Duly Welded) to RDSO Drawing No. WD- 90030-S-66, etc.
Comprehensive Annual Maintenance Contract (CAMC) of FDS System (Make- M/S N&S Solution) fitted in Vande Bharat Rake No. 4 through OEM firm M/S N&S Solutions Private Ltd-Bengaluru on single tender basis at Aishbag Coaching Depots for a period of 02 Years.
MS ANGLE 150 X 150 X 10mm IS-2062 Gr. E250 Quality B0.
Supply & Application of Sealant as per Annexure-T (Rev-01) dated 12.10.2023
SPHERICAL BEARING - Dia 70 for Stabilizer assembly (Anti roll bar)
Electrification due to Conversion of Itaunja Halt into 3 Line Crossing Station in LJN - STP Section in LJN Division of N.E.Railway.