Loading
Loading…
Loading…
9,968 results • Latest
Unbranded--THE MONA & COMPANY Rectangle Executive Table Brand: Unbranded--THE MONA & COMPANY (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687743193729 dt.30/04/20
microtek Line Interactive UPS with AVR of Rating 1.0 KVA With Warranty of 2 Years Brand: microtek (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687755850859 dt.30/
DURIAN Rectangle Executive Table Brand: DURIAN (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687708992679 dt.02/05/2026)
Set of Fasteners for memu Bogies consisting of three items (1) Hex Head Screw M16x75 high tensile, as per Drawing,IS:1364(Part-2)-1992-8.8, Qty-01 Nos/Set (2) Hex Head Screw M10x40 high tensile as pe
Unbranded Impact Wrench, Warranty 18 month Brand: NA (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687772247067 dt.02/05/2026)
Side bearer as per RDSO SKVL-127, Alt-10 or Latest & Specification no. VL-03 Rev.02 of August%u201917.
MARUTI & M-WEIGH--MARUTI WEIGHTECH PRIVATE LIMITED Analytical weighing scale having least count 4 digits after decimal and above with Rated Load Capacity 200 gm , and Resolution - 0.1 mg Brand: MARUT
TRD items as listed and annexed
SAFETY CARTRIDGE DEUTZ Part No:-0148-22-011, Make:-DEUTZ only.
High Reach Pantograph for Three phase el [High Reach Pantograph for Three phase electric locomotive]
Pantograph Assembly for high speed AC Lo [Pantograph Assembly for high speed AC Locomotives]
Oil seal for motor of Elgi Aux Compressor Model CRC-150 as per Elgi Part No. 000420350
DOOR STOP ASSEMBLY FOR BODY SIDE DOOR TO RCF DRG. NO. CC43327, ALT. b, ITEM-1,2 AND 5. MATERIAL AND SPECIFICATION AS PER DRAWING.
Plywoodfor General Purposes Markedto IS303 (V3) (Q2)
FIRE RETARDANT VINYL COATED UPHOLSTERY FABRIC (ARTIFICIAL LEATHER )
Shirting Angola Conformingto MHA Specification/Defence Specification/IS8331 (Q2)
Square type LED light fitting type B-1, 9 watt for LHB Non AC coaches, as per Drawing No. CC76453, confirming to RDSO spec no. RDSO/PE/ SPEC/TL/0091- 2016 (Rev.1) and RCF Annexure-1, 2 & 3.
Sealed maintenance free Valve Regulated Lead Acid mono block battery 12V, 7 Ah for L ED based Emergency light unit for AC & Non AC Coaches. The accepted make of the Battery shall be M/s Exide / M/s TAFE (AMCO)/ M/s Amararaja/ M/s HBL as per (Annexure-A) Bill of Material of RDSO Spec. No. RDSO/PE/SPEC/AC/0180-2016 (Rev. 0).
Kit for Injection Moulded High Performance Polyamide (HPPA) brake gear bushes to RDSO Spec. No. RDSO/2009/CG -17 (Rev. 3) or self lubricating polyester resin based composite brake gear bush to RDSO Spec. No. C - K605 (Rev. 3) to RDSO Drg. No. SK-81039 alt-15 as per following list. Sr. N o. 1- Size of Bushes D = Phy 42 x Phy 32 x 20 mm Item No. of RDSO Drg. SK-81039 Alt.15 Item No. 2 Qty/Kit in Nos. 60 Sr. No. 2- Size of Bushes D= Phy 42 x Phy 32 x 32 mm Item No. of RDSO Drg. SK-81039 Alt.15 Item No. 3 Qty/Kit in Nos. 26 Sr. No. 3- Size of Bushes D= Phy 70 x Phy 57 x 25.5 mm Item No. of RDSO Drg. SK-81039 Alt.15 Item No. 7 Qty/Kit in Nos. 16 Sr. No. 4- Size of Bushes D= Phy 32 x Phy 23 x 20 mm Item No. of RDSO Drg. SK-81039 Alt.15 Item No. 11 Qty/Kit in Nos. 04 Total no of bus hes per kit Qty. Kit in No. 106
Rivet M.S. Snap Head Size 20mm x 80mm conforming to IS: 1929/1982, Rev.1 with Amndt.4 (Reaffirmed Year: 2021) and material conforming to IS: 1148-2009 (4th revision).
Washer M.S. black punched suitable for M-20 dia. bolt bore 22 mm to IS:2016/1967 with Amndt No. 4, Type-A Table.-2.
Acellular Dermal Matrix (V3) (Q2) ( PAC Only )
Acellular Dermal Matrix (V3) (Q2) ( PAC Only )
Medical item
NER-Lucknow Div.:- Feasibility study survey and preparation of DPR for construction of ROB / RUB/LHS in lieu of Level Crossing in jurisdiction of ADEN/W/GKP (Total 53 Nos.) under Sr.DEN/I/LJN.
NER-LJN Division: Provision of Precast RCC Duct of size & Precast RCC Chamber for laying S & T Cable at LCs. Gate 25/C & 26/C (CM-ANDN), 19/C (PJ-CM), 91/C (BNY- PPW), 52/C (SYU-BVN) & 166/C (GK-BNKJ) in sanctioned work of Interlocking of 06 Nos LC gates TVU grater than 20000 over Lucknow Division.
Augmentation of Power Supply by Provision of compact sub station capacity 2x500 KVA at UTS substation under jurisdiction of Dy.CEE/Colony.
NER-Lucknow Div.:- Feasibility study survey and preparation of DPR for construction of ROB / RUB/LHS in lieu of Level Crossing in jurisdiction of Sr.DEN/HQ/LJN (Total 44 no)
NER-Lucknow Div.:- Feasibility study survey and preparation of DPR for construction of ROB / RUB/LHS in lieu of Level Crossing in jurisdiction of Sr.DEN/III/LJN (Total 42 nos.)
NER-LJN Division: Construction of Traffic inspector office at 15 locations and upgradation of pannel room, rest room at 46 nos. stations in sanctioned work of (1) Comprehansive traffic oversight and safety monitoring system for safe train operation and staff supervision (15 stations). (2) Upgradation of pannel room. Rest room etc (46 stations)
Feasibility study survey and preparation of DPR for construction of ROB/RUB in lieu of Level Crossings in Jurisdiction of ADEN/BRK & ADEN/MLN ( Total 60 nos).
NER-Lucknow Div.:- Feasibility study survey and preparation of DPR for construction of ROB / RUB/LHS in lieu of Level Crossing in jurisdiction of ADEN/E/GD ( Total 37 Nos.) under Sr.DEN/I/LJN.
Comprehensive Annual Maintenance Contract of OFC cable for SCADA Communication laid in GKP-PRZ, STP-MLN,GD-BNY,GD-BRK & STP-BKT section with deployment of maintenance team for each section for 02 Years.
Gorakhpur cantt-Lucknow jn.:- Interlocking of 06 Nos LC Gates TVU greater than 20000 over LJN Division. (19C PJ-CM, 25C CM-ANDN, 26C CM-ANDN, 91C BNY-PPW, 52C SYU-BVN & 166C GK-BNKJ)
Phephna - Aunrihar Section :- Manufacturing and Supply of Alumino thermic welding portions of 52KG/60Kg as approved by RDSO for welding of rails (1650 Nos)
Working of Track Geometry by Pretamping/Post tamping measurement using Timble Gedo Voryss trolley system or similar equipment system under Jurisdiction of Sr. DEN/II/Varanasi.
HCV Rapid Test Kits (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Experience Criteria, Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6449853 Dated : 28-07-2025 Bid Document 1/6 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting
MAGAZINE BAG
MALE ELBOW CONNECTOR
ROUND BLACK PLOUGH STEEL WIRE ROPE
ROUND BLACK PLOUGH STEEL WIRE ROPE
PNEUMATIC HORN (AIR OPERATE)
Guide Bush for Axle Box Guide Arrangement 1400 HP
Custom Bid for Services - 1 Hiring of truck on daily basis of 5 MT capacity truck (One Number for 180 days in a year for two years) (I e 1x180x2=360 days), Custom Bid for Services - 2 Additional running charges for per Km running of truck (Over item no NS/1 above) (1x180 days X Average 44 444 Km per days for 2 years= 16000 Kms), Custom Bid for Services - 3 Hiring of Pickup Van/Tata Mobile etc On daily basis (03 Pickup Van/Tata Mobile for 300 days in a year for 2 years = 300x3x2=1800 days), Custom Bid for Services - 4 Additional running charges for per Km running of Pickup Van/Tata Mobile (Over item no NS/3 above) (3x300 days x Ave 40 Km per day x 2 years =7200 Kms), Custom Bid for Services - 5 a (USSOR-2021 Item No 211201) JCB Backhoe Loaders 3DX Plus or similar with minimum 1 10 cum bucket capacity, Custom Bid for Services - 5 b (USSOR-2021 Item No 211202) Hydra or similar tyre mounted Pick-n-Carry crane of 12T capacity for misc works of handling of material, Custom Bid for Services - 5 c (USSOR-2021 Item No 211203) Tractor with Trolley for local transportation or other misc works
PU painting of electric locomotives at Loco Shed Gonda for 1 year
1.Set of items for VB/TS Coaches consisting of Four items , Item No.1- Washer For Motor MTG as per Drg. No. A-A675UV2-138171, 2.Item No.2- Shim for TM Bottom MTG as per Drg. No. B-A675UV2-138173, 3.Item No.3 - Bush For APC Receiver as per Drg. No. B-A675UV2-142833 , 4.Item No.4 - Bush For Beam Assembly as per Drg. No. B-A675UV2-142839
LEVER SIZE: (20 x 100 x 522 mm) WITHOUT BUSHES TO RDSO DRG. NO. SK- 98026, ALT.1 ITEM 4. MATL. AND SPECN. IS : 2062/2011 WITH AMNDT. 1 OF NOV.'12, GRADE- E 250 C.
Electronic Control Module For SIL Vaporid Air Dryer Drg. No. 09872401 or MMHP Part No. 5152022 or WABCO Part No. 653351 or SJI Part No AD-115-SJI-21 Which is Similar To SIL as Per Drg. No. 09872401.