North Eastern Railway Tender Results

Cast steel side frame along with liners (duly welded) to RDSO Drawing. No. WD- 89067/S-3, Alt-19. Material and specification as per drawing and conforming to RDSO Specification WD-17-Casnub-22HS-Bogie-1992, Rev.4 of September 2024.

Cast Steel Bolster (For Modified Separate type Pivot) to RDSO Drg. No - WD- 89067-S/4, Alt. 12 or latest, Item no.-1 to 3. Matl. and Specn. As per Drg.

3 KVAR metalized polypropylene, Nitrogen gas filled, Wavy-cut, 3 phase, self healing type capacitors etc.

Amikacin Sulphate 500mg inj

Tab. Calcitriol + Calcium + Vit K2-7

Set of BRITISH CHEMIAL STANDARD CRM

Supply of fixture for almen intensity

BEARING GREASE, KLUBER ISOFLEX TOPAS

Syp. Ambroxol with Terbutaline and Gauiphensin

Inj. Tirzepatide 7.5 mg

Traction motor safety lug adopter as per drg. No.- B/TRS/RC/4/290

MOTOR FOR MACHINE ROOM BLOWER AS PER RDSO SPEC No. E-10/3/09 (motor) with amendment nos.01,02,03,04 & 05 and CLW specification no.CLW/ES/3/0020 Alt- G

Amplifier (TRD)

1, Pre-Op Toric Reference Marker with Bubble Level. 2, 23 G sharp tipped straight cutting scissors. 3, Disposable bimanual cannula handpiece set with polisher 21 G.

PU Paint Air Craft Blue (Two Pack) ISC no. 108, IS:5/2007 (Reviewed in 2022) as per RDSO Spec. no. M&C/PCN/100/2018 with amendment-1B (Rev.-02).

3 KVAR metalized polypropylene, Nitrogen gas filled, Wavy-cut, 3 phase, self healing type capacitors etc.

SUPPLY OF PROTECTIVE CAP FOR BRAKE CYLINDER OF LHB COACHES.

MODIFIED SHIM FOR AAR H TYPE TIGHT LOCK

Hex. Nipple 15 mm for pipe fitting of brake system to ICF Drg. No. DCEMU-3-5- 032, Alt. s/6, item - 19 and RDSO Spec. No. 04 -ABR-02 with Rev. 02 of Dec'2019

Nylon bush for alternator suspension bracket for Non AC (13T Bogie), size- phy 42x phy 32.5x50 mm, As per to RDSO Drg. No. RDSO/PE/SK/TL-0129-2009 (Rev- 0), Alt. 1 to RDSO Spec. No.RDSO/PE/SPEC/AC/0006- 2009 (Rev-1) of Oct' 2009.

SET OF PRIMARY SPRING FOR WAP-7 LOCO (03 ITEMS 32 Nos) TO CLW Specn.No. CLW/MS/3/008 Alt-3 (1) PRIMARY SPRING FOR END AXLE TO Drg. No. 1209.01.115.008 Alt-1, Qty-16 Nos. (2) PRIMARY SPRING (MIDDLE AXLE OUTER) Drg. No. 1209.01.115.009 Alt-1, Qty-08 Nos. (3) PRIMARY SPRING (MIDDLE AXLE INNER) Drg. No. 1209.01.115.09 Alt-1, Qty-08 Nos.

Synthetic Web Equipment Improved Version (MHA) (Q2)

Joint less Grooved copper contact wire 107 Sq mm made out of continuous cast copper wire rods confirming to RDSO specification no-TI/SPC/OHE/CW/0971 . (Material supply in a wooden drum) (Warranty Peri

Unbranded--THE MONA & COMPANY Mid-back Chair With Fixed armrest with Padding Brand: Unbranded--THE MONA & COMPANY (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687

M.S Slotted Cheese Head Screw M5X12 mm with nickel plated as per IS 1366:2002 or latest MAKE/BRAND-"DKE"

TM Bellows For 3Phase TM Type TME 48-45-6 To M/s Medha Part No. SP648V27120 And M/s Medha Drawing No. B-A675-21666 or its Equivalent For 1600HP DEMU/DPC. Make/Brand- --

SPRING PAD (HAPPY PAD) FOR WAG/5 LOCO. DRG.NO. SKVL-323.ALT.1.

KANTOOR FURNITURE Two ? drawer type Steel Filing Cabinets Brand: KANTOOR FURNITURE (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687777781858 dt.01/04/2026)

UN-INSULATED CADMIUM COPPER CATENARY WIRE 65 Sq. mm. (19/2.10 mm) as per RDSO SPECIFICATION No. TI/SPC/OHE/CAT (Cu-Cd)/0971 (Warranty Period: Up to 30 months from the date of delivery.)

SURGE ARRESTER FOR 3 PHASE LOCO AS PER CLW'S SPECN. NO. CLW/ES/3/0016

LAVAKA 20 tonne Hydraulic Jack / Bottle Jack with integral pump Brand: LAVAKA (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687743738106 dt.21/03/2026)

Wear Plate for Bogie Frame Assly.to drg. no. ELW/BSL/WAM4/4/F-64-017 Alt 1.

Unbranded 10 tonne Hydraulic Jack / Bottle Jack with integral pump Brand: NA (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687758012457 dt.21/03/2026)

Set of contacts (Fixed and mobile) for contactor BPS 15-15 C2 for convertor and Hotel Load as per document no. HBTA420418 R0001 and HBTA 420419R0001 Set.

Polyamide self lubricating bush for compensating equalizer pin size 40x85x70 mm for WAG-7 loco as per RDSO Drg. No. 2007/EL/SPEC/0056/REV 0 JAN-08. & Drg. No. SKEL-4725.REF-4 or latest.

8 PIN CONNECTOR AS PER SPECIFICATION ATTACH AS ANNEXURE-A SIMILAR TO ESCORTS Part no. IJ112000037 MALE. MAKE/BRAND-"SELF"

Unbranded 10 tonne Hydraulic Jack / Bottle Jack with integral pump Brand: NA (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687758012457 dt.21/03/2026)

Hex. Head Screw M24 x 100 to IS:1364 (Pt.-2)/2023, IS:1367(Pt.-3)/2017, CE , property class - 10.9, coating as per RCF Specification - MDTS-057 . Grade & make should be clearly embossed at suitable lo

Engg. Item

Engg. Item

Set of Nylon Bushes

Bearing Bolt

CENTERING ADJUSTMENT DEVICE

Yoke (Sub Assembly) for draw

Monthly Basis Cab & Taxi Hiring Services - SUV; 2000 KM per month; Outstation 24*7

Telmisartan 40mg plus Amlodipine 5mg Tab.

Tab./Cap. Trimetazidine ER/SR 80 mg .

Set of safety sling arrangement

Entry and Mid Level Desktop Computer (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

CARBON BRUSH FOR AUXILLARY COMPRESSOR MOTOR TO DRG.NO. BSL/ELW/4/F84.031 ALT-2. as per Drg.No. BSL/ELW/4/F84.031 ALT-2