Loading
Loading…
Loading…
9,992 results • Latest
One-time Repair of Virtual Welding Simulator (SI.No.-31283616 Product No.- FR900012IN, Make Fronius) installed at BTC of Mechanical Workshop, Izzatnagar (As Per Scope of Work) for period of 30 days.
Replacement of 8 channel Voice Data Logger with 5 Year CAMC for control circuit of Varanasi Division.
Electrification of proposed constructed Signal building and other allied works etc in connection with Electronic Interlocking of Yard at Railway Stations i.e. Khalilabad, Maghar and Jagatbela.
S&T work in connection with Widening of Road near LC 128C gate between DEOS- NRA for truck Movement & approach road.
Provision of IOT devices/Intelligent Field Devices(IFDs) of 30/70% Platform lighting, street lighting, Lifts and Escalators over BSB Division (Ph-2).
Provision of Pre-cooling cum Battery charging Points at Siwan & Mau stations.
Provision of IOT devices/Intelligent Field Devices(IFDs) for IR-NIYANTRAC of Substation & Water pump over BSB Division (Ph-2).
Foot Operated Horn Valve Complete
SET OF SINGLE TONE HORN
Horizontal Wear Liner for Centre Pivot Bottom as per RDSO drawing No. WD- 97049-S/3, Alt-12, Item No.3. Material and specification as per drawing.
Point of Care Rapid Test Kits for Humans – Dengue, Malaria, Typhoid & Others (Q2)
Sealing ring for water tank etc.
Ligation Clips (Q2)
Custom Bid for Services - Cleaning of Workshop Floor Area as per Schedule A of Scope of work area mentioned in Annexure I of Scope of Work by Broom frequency Twice daily, Custom Bid for Services - Consumables to be provided by the contractor for the work of Schedule A of Scope of work carried out as per Annexure-I of Scope of work, Custom Bid for Services - Cleaning of Workshop SSE Office Area to be cleaned and Mopped as per Schedule B of Scope of Work Area mentioned in Annexure II of Scope of Work frequency once daily, Custom Bid for Services - Consumables to be provided by the contractor for the work of Schedule B of Scope of work carried out as per Annexure- II of Scope of work, Custom Bid for Services - High End Machinery to be provided by the contractor for the work of Schedule B of Scope of work carried out as per Annexure-II of Scope of work, Custom Bid for Services - Segregation Collection Disposal of Scrap Debris and Spraying of Disinfectant wherever required as per Schedule C of Scope of work area as mentioned, Custom Bid for Services - High End Machinery to be provided by the contractor for the work of Schedule C of Scope of work carried out as per Annexure- I of Scope of work Bid Number : GEM/2026/B/7097173 Dated : 10-01-2026 Bid Document 1/12 Similar Category Cleaning, Sanitation and Disinfection Service - Outcome Based Cleaning, Sanitation and Disinfection Service - Outcome Based Cleaning, Sanitation and Disinfection Service - Outcome Based Cleaning, Sanitation and Disinfection Service - Outcome Based Cleaning, Sanitation and Disinfection Service - Outcome Based Cleaning, Sanitation and Disinfection Service - Outcome Based Cleaning, Sanitation and Disinfection Service - Outcome Based
Custom Bid for Services - Cleaning of Workshop Floor Area as per Schedule A of Scope of work area mentioned in Annexure I of Scope of Work by Broom frequency once daily, Custom Bid for Services - Consumables to be provided by the contractor for the work of Schedule A of Scope of work carried out as per Annexure-I of Scope of work, Custom Bid for Services - Cleaning of Office Area and Workshop Office area to be cleaned and Mopped as per Schedule B of Scope of Work Area mentioned in Annexure II of Scope of Work frequency once daily, Custom Bid for Services - Consumables to be provided by the contractor for the work of Schedule B of Scope of work carried out as per Annexure- II of Scope of work, Custom Bid for Services - High End Machinery to be provided by the contractor for the work of Schedule B of Scope of work carried out as per Annexure-II of Scope of work, Custom Bid for Services - Segregation Collection Disposal of Scrap Debris and Spraying of Disinfectant wherever required as per Schedule C of Scope of work area as mentioned in annexure I frequency once daily, Custom Bid for Services - High End Machinery to be provided by the contractor for the work of Schedule C of Scope of work carried out as per Annexure-I of Scope of work, Custom Bid for Services - Cleaning of Toilets of Office Area and Workshop Office area as per schedule D of Scope of work Area mentioned in Annexure III to be cleaned and Mopped frequency twice daily, Custom Bid for Services - Consumables to be provided by the contractor for the work of Schedule D of Scope of work carried out as per Annexure- III of Scope of work frequency twice daily, Custom Bid for Services - High End Machinery to be provided by the contractor for the work of Schedule D of Scope of work carried out as per Annexure-III of Scope of work frequency Once daily Bid Number : GEM/2026/B/7065879 Dated : 03-01-2026 Bid Document 1/14 Similar Category Cleaning, Sanitation and Disinfection Service - Outcome Based Cleaning, Sanitation and Disinfection Service - Outcome Based Cleaning, Sanitation and Disinfection Service - Outcome Based Cleaning, Sanitation and Disinfection Service - Outcome Based Cleaning, Sanitation and Disinfection Service - Outcome Based Cleaning, Sanitation and Disinfection Service - Outcome Based Cleaning, Sanitation and Disinfection Service - Outcome Based Cleaning, Sanitation and Disinfection Service - Outcome Based Cleaning, Sanitation and Disinfection Service - Outcome Based Cleaning, Sanitation and Disinfection Service - Outcome Based
Monthly Basis Cab & Taxi Hiring Services - SUV; 2500 km x 320 hours; Outstation 24*7
LOWER RUBBER WASHER FOR AXLE BOX GUIDE etc.
Blank Plug Complete with Gasket size PG- 48 as per RDSO specification No. RDSO/PE/SPEC/0138-2009 Rev-1 Table A-18, Item- 8, Thread Size- PG-48 suitable for feeder junction box in LHB Coaches with Bio tank .
Set of items for memu bogies consisting of two items (1) Guide Ring (Acetal homopolymer) for axle box guide arrangement to ICF Drg.No. T-0-1-640 Alt-b/2 matl & Spec. as per Drawing, Qty- 01 Nos/Set (2) Dust Sheild for axle box Guide to ICF Drg.No. T-0-1-619, alt-m/13,col-1 , Qty-01 Nos/Set
Non Insulated Pin Type Heavy Duty Copper Crimping Socket Of Size-16 Sq.mm.
VANDE BHARAT ITEM :- Oil Sampling Kit consists of Socket-36, Socket-50, Foot Pump with pipe, PRD blanking Plate, Pressure Gauge, Sampling arrangement with valve, suitable to JSTI make/model main power transformer of Vande Bharat train set verson-2 Make/Brand-Self.
100VA individual static inverter with 6A,5 pin modular socket and switch complete, for Laptop/Mobile, Type-A for AC coaches confirming to RDSO spec. NO:RDSO/PE/SPEC/TL/0142-2010 Rev-0 or latest
Corded Magnetic Drill Machine with Technical Specification attached in Annexure-'A'. Make- Bosch, Ralliwolf, Dewalt, KBM or similar.
set of following items - 1. flexible hose JK EXIM part no. JK-FDSS-1204 or similar qty 02 no 2. MS hax bush JK exim part no. JK-FDSS-1211 or similar qty 01 no.
Rust cleaner, type rost fash spray freezes and cracks rust, in 500ml convenient 360 degree spray valve aerosol can. Make: CRC/CYCLO/EPIG EN only, Detailed spec
Temperature sensor 2XPT100 Class B according to IEC 60751, model No RTDPT-100 of M/S Altop Industries Ltd for three phase ABB make transformer as per ABB Drg No 12CH101053. Make:-ALTOP
Battery charger for 110V 40AH battery at SP/SSP for Electric Traction installation conforming to RDSO Spec.TI/SPC/PSI/40-150 CHGR/1210 or latest.Warranty as per IRS condition.
Densified Thermal Bonded Polyester Block for four seater GS /LGS coaches to ICF Drg. No. ICF/SK3-6-1-098, Alt. "0", Date of first issue 17/10/2016 item no.- 1 Size 40 x 562 x 1912 mm and RDSO Spec. No. C-K 607 (Rev. 2 of Dec' 2015 with amndt no. 1 of Aug. 2016.)
Rail Cutting Wheel Abrasive Disc as per RDSO Specification No.-TM/SM/2, Rev. 01 Of 2007
LED DRIVER, rated input watt 9W, 110 V AC/DC, OPERATING RANGE 90 TO 140 V AC/DC, rated out put voltage 24V. SUITABLE FOR LED LIGHT FITTING 09WATT TYPE B1,&C for LHB coaches. As per RDSO SPEC NO: RDSO/PE/SPEC/TL/0091-2016 REV 01. OR LATEST with max. physical dimension Length X width X Breadth. 160mm X 45mm X 35mm. Annexure attached
SET OF SHIMS FOR AAR-H TYPE TIGHT LOCK CBC IN LHB COACHES AS PER RDSO DRAWING No. CG-15090 Alt-1. Detailed as per Annexure attached
Epoxy based Zinc Phosphate Primer (Two pack) to RDSO specification No.M&C/PCN/100/2018 Chapter II, RDSO's amendment no. 1B as an Additional requirement.
HYDRAULIC PRESS FOR PRESSING CONTROL ARM FOR VANDE-BHARAT BOGIE ASSEMBLY
Socket Reducing Mild Steel (Galvanized) Nominal size of outlet-65 mm X40 mm to IS: 1239 (Part-2)/2011 with amendment No 3 of March 2016 Table 18 (Clause 9.1).
Safety wire rope assly. to RCF Drg. No. LW 05105 Alt. Nil. Material and specification - As per Drg.
Set of Prevailing Torque type Hexagonal Nut Consisting of 04 items etc.
CEILING FOR LHB POWER CAR.
1-OUTER GLASS FOR DESTINATION BOARD OF VANDE BHARAT 2-Pillar glass (Big) Size 970x860 mm, Thickness 5 mm 3-Pillar glass (small) size 380x860mm thickness 5mm
Lower cable Cover as per RCF EDTS -355,.